You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Back to Table of Contents

Back to SBC SIP Transparency Implementation Guide


 

 

In this section:

Related articles:

SBC ERE Configuration

Creating IP Signaling Profile

To create the IP Signaling Profile, execute the following command:

% set profiles signaling ipSignalingProfile DEFAULT_SIP

Creating Cause Code Mapping Profile

To create the Cause Coding Mapping Profile, execute the following command:

% set profiles signaling ipSignalingProfile DEFAULT_SIP egressIpAttributes sipCauseMapping internalToSipCauseMappingProfileName ERE_CPC2SIP
% set profiles signaling ipSignalingProfile DEFAULT_SIP egressIpAttributes sipCauseMapping sipToInternalCauseMappingProfileName ERE_SIP2CPC

Creating Profile to Map CPC and SIP

% set profiles signaling sipCauseCodeMapping sipToCpcCauseMapProfile ERE_SIP2CPC baseProfile defaultSipCpc causeMap 482 cpcCause 70
% set profiles signaling sipCauseCodeMapping cpcToSipCauseMapProfile ERE_CPC2SIP baseProfile defaultCpcSip causeMap 70 sipCause 405

Attaching Cause Code Mapping Profile to Trunk Groups

To associate the created profiles with Ingress and Egress Trunk Groups, execute the following commands:

Ingress

% set addressContext default zone Zone1 sipTrunkGroup SIPTG_2 signaling causeCodeMapping sipCpcCauseMappingProfile ERE_SIP2CPC
% set addressContext default zone Zone1 sipTrunkGroup SIPTG_2 signaling causeCodeMapping cpcSipCauseMappingProfile ERE_CPC2SIP

Egress

% set addressContext default zone Zone2 sipTrunkGroup SIPTG_1 signaling causeCodeMapping sipCpcCauseMappingProfile ERE_SIP2CPC
% set addressContext default zone Zone2 sipTrunkGroup SIPTG_1 signaling causeCodeMapping cpcSipCauseMappingProfile ERE_CPC2SIP

External PSX/ePSX Configuration

 

 

  • No labels