In this section:

 

Use this command to configure custom SWe Traffic Profiles.

Command Syntax

% set system sweTrafficProfiles <profile name>
	isAccess <value>
	callHoldTime <duration>
	passthroughCodecProfile <profile name>
	transcodePercent <percentage>
	transcodingCodecProfile <profile name>
	useGPUForTranscoding <false | true>

 

Command Parameters

% set system sweTrafficProfiles <profile name> 
      bhcaPerSubscriber <attempts>
      callHoldTime <seconds>
      cryptoPercent <percent>
      directmediapercent<percent>
      externalRefreshTimer <seconds>
      internalRefreshTimer <seconds>
      isAccess <false | true>
      mediaCostFactor <media factor>
      passthroughCodecProfile <profile name>
      processorCapabilityIndexOverride <false | true>
      processorCapabilityIndexOverrideValue <processor factor>
      rxPPSFactor <Rx PPS factor>
      sigCostFactor <signaling factor>
      tonesPercent <percent>
      transcodePercent <percent>
      transcodingCodecProfilec<<profile name>
      txPPSFactor <Tx PPS factor>
      useGPUForTranscoding <false | true>

 

 

Command Example

  1. Create custom SWe Traffic Profile.

    set system sweTrafficProfiles customProfile isAccess true bhcaPerSubscriber 2.5 callHoldTime 600 cryptoPercent 20 directMediaPercent 20 passthroughCodecProfile G711_20ms transcodePercent 30 transcodingCodecProfile customCodecMix internalRefreshTimer 3000 externalRefreshTimer 2500 tonesPercent 15 processorCapabilityIndexOverride false
    commit
  2. Create a Codec Mix Profile.

    set system sweCodecMixProfile customCodecMix g723 p20 percentage 50
    set system sweCodecMixProfile customCodecMix g711 p20 percentage 30
    set system sweCodecMixProfile customCodecMix g729 p10 percentage 20
    commit
  3. Attach a Codec Mix Profile to the SWe Traffic Profile.

    set system sweTrafficProfiles customProfile passthroughCodecProfile G711_20ms transcodePercent 30 transcodingCodecProfile customCodecMix
    commit