EdgeMarc Device Overview

The 

Navigate to Devices > List and select the required 

The device overview page gives the following details:

• Basic device details:
  • Model & Mode – The device model and mode.
  • MAC Address – MAC address of the 
    Unable to show "metadata-from": No such page "_space_variables"
    device.
  • Firmware version – Firmware version running on the device.
  • Active address – The active address of the device.
  • Description – Description if available.
  • Located in – The collection in which the device is located.
    
  • Connection State – Shows the state of the connection.
  • Up Since – The time at which the connection became active.
  • Policy Compliant – Specifies whether the device is policy compliant.

  • SIP Server Status – The SIP Server Status. Click the SIP Server Status to see more details about SIP Server Status.
    
    

    SIP Server Status
    
    

  • LAN/WAN – Shows the LAN/WAN status. Click LAN/WAN to see more details about the LAN/WAN Status.
    
    LAN/WAN Status
    
    

    Note

    The LAN/WAN Status is only available on 

    Unable to show "metadata-from": No such page "_space_variables"

     SBC models running 

    Unable to show "metadata-from": No such page "_space_variables"

     VOS versions 16.1.0 or higher.

  • T1 – Shows the T1 status. Click T1 to see more details about the T1 status.
    
    T1 Status
    
    
    Note

    The T1 Status is only available on 

    Unable to show "metadata-from": No such page "_space_variables"

     4800 models running 

    Unable to show "metadata-from": No such page "_space_variables"

     VOS versions 16.1.0 or higher.

  • Average MOS – Average MOS value during the last 15 minutes. 

  • Peak Calls – Peak calls value in the last 15 minutes. 
    

• Advanced Features – Specifies whether SD-WAN is enabled. If it is not enabled, an option to enable it is available.

• Configure SD-WAN – Allows you to configure the SD-WAN feature.

• WAN Health – Provides details about WAN health status. 

• WAN Traffic – Provides a graphical representation of WAN traffic.

• WAN Traffic by Queue – Provides a graphical representation of WAN Traffic by Queue in the last 24 hours.

• Total Peak Calls – Total number of peak calls every 15 minutes in the last 24 hours.