The following procedure describes how to install the SBC 5400 application as a HA pair configuration:
Launch the EMA. Refer to Logging On to EMA in Platform Mode for guidance.
Navigate to Administration > System Administration > Software Install/Upgrade tab. The Packages screen is displayed.
Select the Package Name to install.
Click Install Software.
The Install Software section expands and displays the Install Software, Management Ports (configured via the BMC) and System Configuration details.
Select Peer Hostname and enter peer hostname.
Click Start Installation.
The installation process begins and displays the installation status on the Installation Log section.
The following actions are performed during the installation process:
Pre-Installation Checks
Package content extraction:
Install SBC 5400 service.
Initialize SBC 5400 service.
Update SBC 5400 hostname.
Reboot SBC 5400 system.
Log on to EMA. The new SBC application version is displayed on the Monitoring > Dashboard > System and Software Info window.
Repeat steps 2 through 9 to install the SBC application on the Standby peer, but with the following changes to steps 5c, 5d, and 5e:
Step 5c. Enter Standby server name in Local Hostname field, which is typically the System Name with a letter “b” appended at the end.
Step 5d. Enter Active server name for Peer Hostname field, which is typically the System Name with a letter “a” appended at the end.
Step 5e. Choose Standby option for Server Role to designate the Standby server as the one you are configuring.
Click Start Installation.
Once the installation is completed, verify the system status for both "Active" and "Standby" servers using Monitoring > Dashboard > System and Software Info menu.