This object displays the call CDR configuration. Records are always written to the local disk. On the SBC main screen, go to Administration > Accounting and Logs > Admin. The CDR Admin window is displayed. The fields displayed are: Parameter Description The SBC version on which the CDRs must remain formatted even after the SBC software is upgraded. The valid values for the configuration option are 0 or 10.1 for the SBC 10.1 release. The default value for the configuration is 0 (disabled). If the option is disabled, the CDRs are formatted according to the CAM version of the software release loaded on the SBC. Note: The valid values list will change over time to support future releases. Examples of how the configuration control works, if the users do not want to update the billing systems with every SBC upgrade: Upgrade from SBC 8.2 (or any old release) to 10.1 Upgrade from SBC 8.2 ( or any old release) to 11.1 (or future releases later than 10.1) If the configuration is set to the currently-loaded SBC software version (provided the current SBC loaded version is greater than or equal to 10.1) the CDR formatting is retained according to the selected SBC version across the upgrades. Upgrade from SBC 10.1 to 11.1 (or future release later than 10.1) Set the new configuration to 10.1 from 0 (disabled) prior to the upgrade. Fresh installation of the SBC (version greater than or equal to 10.1 ) Example: you are planning to add more SBCs to a cluster already using the current feature (the SBC version is 11.1 and the CDRs are formatted to 10.1 by having the new config set to 10.1 on the SBCs). Enables or disables generation of CDRs for recording SIP calls. The type of calls for which accounting records should be logged on this Specifies whether Intermediate Accounting is Enabled or Disabled for the Node. Options are: This configures the intermediate accounting interval in seconds. Note: This object is only applicable when Enable flag to allow second stage accounting records for two stage calls to inherit fields from the first stage call. Options are: Enable flag to populate the Called Number Before Translation field in the accounting record for a number for which an LNP lookup was performed and lookup indicated that number has not been ported. Options are: Specifies the method by which intermediate records are generated. Options are: Specifies Octet string that identifies the GMT time to generate Telcordia Long Duration accounting records. The format is 00:00:00.0 where each field is: Specifies whether Start Accounting is Enabled or Disabled for the Node. Options are: Enable flag to generate EVENT records for OOD SUBSCRIBE, REFER, NOTIFY, REGISTER, OPTIONS, MESSAGE and PUBLISH event records. CDRs are logged when OPTIONS is relayed to the egress side. Log event records containing PSX information, such as PSX Congestion level, PSX Processing Time, Policy Response Call Type, PSX Billing Info, Route Label. Specifies whether a trap will be generated whenever an INTERMEDIATE record is generated. Options are: Specifies whether a destination Options are: Specifies whether or not to generate early ATTEMPT records. An early ATTEMPT record is associated with an early call disconnect, before the request is sent. Options are: Specifies the Accounting INTERMEDIATE Records Duration (in hours). Must be 1-24; default is 24. This parameter is only applicable when intermediate records mode is set to telcordia. The INTERMEDIATE record is generated for each call whose duration exceeds this threshold on long duration generation time. Specifies whether or not to send the egress CDR information immediately after receiving and processing it. Options are: Specifies whether or not to use Ingress Far End Switch Type passed down from PSX IP TG for SIP ingress calls. Options are: Specifies the maximum length of the Record Sequence Number field in the CDR. Options are: cdrVerToGenerate
0
- (default - indicates this control is disabled)10.1
Upgrade Scenario Action and/or Effect The new control does not take effect. Generate SIP Recording CDR
disabled
(default)enabled
Generation Mode
origination
(default)—Log accounting records for which this destination
—Log accounting records for which this allcalls
—Log accounting records for all calls.none
—Log no accounting records.
For SIP and H323 calls, accounting records are generated for all calls (ingress and egress), unless this value is none.Intermediate Acct State
disabled
(default)enabled
Intermediate Acct Interval
sonusAcctIntAcctMode
is set to interval(1).Second Stage Inherit First Stage
false
(default)true
Populate Non-ported LNP Numbers
false
true
(default)Intermediate Acct Mode
interval
(default)—Generate an intermediate record for each intermediateAcctInterval
seconds throughout the call.telcordia
—Generate an intermediate record whenever the call exceeds the configured intermediateLongDurThreshold
value (in hours) and the intermediateLongDurGenTime
(of day) is reached.Intermediate Long Dur Gen Time
field octets contents range
----- ------- ------------ -----
1 1 hour 0..23
2 2 minutes 0..59
3 3 seconds 0..60 (use 60 for leap-second)
4 4 deci-seconds 0..9
Start Acct State
Enabled(default)
Disabled
Event Acct State
Disabled
(default)Enabled
Event Acct PSX Info State
Disabled
(default)Enabled
Intermediate Trap State
enabled
disabled
Populate Remote GSX Info State
enabled
disabled(default)
Early Attempt State
enabled
(default) - Do not generate early ATTEMPT records.disabled
- Generate early ATTEMPT records.Intermediate Long Dur Threshold
Send Egress CDR Info on Receipt
false(default)
true
Populate IP TG Far End Switch Type
enabled
disabled(default)
Max Record Sequence Num
uint16
(default)—16-bit record sequence number 0 to 65535.uint32
—32-bit record sequence number 0 to 4294967295.