You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

  • It is highly advisable not to create rules with overlapping criteria (that is, rule R1 criteria overlaps with criteria of rule R2) to avoid any unexpected results.
  • The
    Unable to show "metadata-from": No such page "_space_variables"
    can track up to 4,000 entries at a time.
  • The
    Unable to show "metadata-from": No such page "_space_variables"
    supports up to eight rules per Enhanced DBL Profile.
  • The administrative state of the rule must be disabled before modifying the parameters of that rule.

  • Either DBL Profile or enhanced DBL Profile can be attached to a SIP IPTG at a given time.

Creating an Enhanced DBL Profile

To create an enhanced DBL profile, enter the following command:

set profiles services enhancedDblProfile test 
commit

Enabling the Enhanced DBL Profile

To enable the enhanced DBL profile, enter the following command:

set profiles services enhancedDblProfile test state enabled
commit

Creating a Rule

To create a rule, enter the following command:

set profiles services enhancedDblProfile test rule r1
commit

Defining the Required Criteria in the Rule

set profiles services enhancedDblProfile test state enabled rule r1 criteria
Possible completions:
  occurrence     - Identifies period over which occurrences of the offending event should match the count so that action is triggered.
  offendingEvent - It identifies the offending event and on the given occurrence can potentially trigger a given action.
  scope          - This field identifies on messages from which entity the criteria will be applied.

Configuring "occurrence"

If the flag consecutive is in disabled state:

If the flag consecutive is in disabled state, the resetMethodResp and resetMethodType are  displayed.

set profiles services enhancedDblProfile test state enabled rule r1 criteria occurrence aggrCountValue 10 consecutive disabled countType aggrCount resetCount 1 resetMethodResp 101 resetMethodType INVITE timerWindow 60
commit

or

If the flag consecutive is in enabled state:

set profiles services enhancedDblProfile test state enabled rule r1 criteria occurrence aggrCountValue 10 consecutive enabled countType aggrCount resetCount 1 timerWindow 60
commit

Configuring "scope"

set profiles services enhancedDblProfile test state enabled rule r1 criteria scope ipAddress
commit

Configuring "offendingEvent"

set profiles services enhancedDblProfile test state enabled rule r1 criteria offendingEvent triggerEventType receiptOfMessage methodResp [ 401 403 ] methodType INVITE
commit

Defining the Required Action in the Rule

To define the required action, enter the following command:

set profiles services enhancedDblProfile test state enabled rule r2 action effectivePeriod 10 type rejectWithResponse rejectWithResponseCode 403
commit

Enabling the Rule

To enable the rule, enter the following command:

set profiles services enhancedDblProfile test rule r1 state enabled
commit

Attaching the Enhanced DBL Profile to SIP Trunk Group

The enhanced DBL profile must be attached to the ingress SIP Trunk Group.

To attach the enhanced DBL profile to the ingress SIP Trunk Group, enter the following command:

set addressContext default zone ZONE1 sipTrunkGroup INGRESS_TG services enhancedDblProfile test
commit 

Removing the Enhanced DBL Entry

To remove the endpoint from the enhanced DBL entry, enter the following command:

% request addressContext default enhancedDBL removeEnhancedDblEntry removeIpEntry sourceIpAddress 10.54.80.8 sourcePort 8000 transport tcp
commit

 

  • No labels