You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

 

 

For the latest Microsoft documentation on this step, please refer to Add Branch Sites to Your Topology

  1. Remote Desktop into the Lync Front End Server.
  2. Launch the Lync Server Topology Builder.
  3. In the left pane, right-click on the Branch Site and select New Branch Site as shown below:

    New Branch Site

  4. Define the site name and click Next.
    (warning) Note: The computer name must be NetBIOS compliantwith a maximum length of 15 characters.

    Define Site Name

  5. Enter the site details as shown below and click Next.

    Site Details

  6. Click Finish.

    Finish

  7. Enter the FQDN of the SBA as shown below.

    Enter FQDN

  8. Select the Front End Pool.

    Select Front End Pool

     

  9. If you have an Edge Server, select the Edge pool (or leave it blank) and click Next.

    Select Edge Server

  10. Define the PSTN gateway as shown below and click Finish.

    Define PSTN Gateway

  11. In the left pane, Right-click the Lync Server 2010 and select Publish Topology to publish the newly created topology.

    Publish

  • No labels