This page describes CLI syntax and parameters for the SIP Trunk Group 'congestionHandling' object.
Use this object to specify the parameters governing the behavior when under local overload or when receiving congestion indications from downstream peers.
Command Syntax
% set addressContext <name> zone <name> sipTrunkGroup <name> congestionHandling egressThrottling <disabled | enabled> retryAfterMax <0-120> retryAfterMin <0-120>
Command Parameters
SIP Trunk Group Congestion Handling Parameters
Parameter | Length/Range | Description |
---|---|---|
egressThrottling | N/A | Determines whether received peer overload indications (SIP 503 w/ Retry After) cause to adaptively throttle egress calls and registrations to that peer. Options are:
Modified: for 10.1.2 Starting with version 10.1.2 the default is set to "enabled". |
retryAfterMax | 0-120 | <value> (default = 30) – Maximum Retry-After time (in seconds) when an ingress call or register is rejected with 503 due to local overload. |
retryAfterMin | 0-120 | <value> (default = 10) – Minimum Retry-After time (in seconds) when an ingress call or register is rejected with 503 due to local overload. |
Overview
Content Tools