Up to 32 trap targets can be configured on the SBC.


To configure the SNMP trap targets, use the following command syntax:

% set oam snmp trapTarget <trapTargetname> ipAddress <ipAddress> port <port number> state <state> targetSecurityLevel <targetSecurityLevel> targetUserName <user name> trapType <inform | v1 | v2 | v3>


To view the SNMP trap targets, use the following command syntax:

% show oam snmp trapTarget <trapTargetname>

Refer to the following pages for SNMP configuration options using CLI and EMA.


  • No labels