Show Table Profiles - Signaling

E164Profile

E.164 Profile configuration details.

• NAME – The E.164 Profile name.

Each of the following fields, if configured in the profile, will specify whether to allow, remove or truncate the special characters/digits as part of Normalization.

• SONUS E164PROF DIGIT A
• SONUS E164PROF DIGIT B
• SONUS E164PROF DIGIT C
• SONUS E164PROF DIGIT D
• SONUS E164PROF DIGIT E
• SONUS E164PROF DIGIT F
• SONUS E164PROF CHAR NON FIRST PLUS
• SONUS E164PROF CHAR STAR
• SONUS E164PROF CHAR HASH
• SONUS E164PROF CHAR HYPHEN
• SONUS E164PROF CHAR DOT
• SONUS E164PROF CHAR LEFT CIRCULAR BRACKET
• SONUS E164PROF CHAR RIGHT CIRCULAR BRACKET

NNI Profile configuration details. For more information refer to NNI Profile - CLI.

• <name> – NNI Profile name.
• chargeAreaInformation – A 5-digit value representing the charge area Information that applies to calls establishing the INVITE.
• carrierCategory – Carrier poi-category type.
• carrierIdCode – The 4-digit carrier identification code associated with the charge area. 
• additionalPartyCategoryFirst – The first Additional Party Category type which is included inside the policy request message sent to the PSX  and sent in the ISUP IAM message body of SIP-I/T or over GW-GW message.
• additionalPartyCategorySecond –  The second Additional Party Category type.
• nationalCallIndicator – The national call indicator type.
• originatingIsdnIndicator – The originating ISDN access indicator type.
• callingPartyCategoryInterworking – If set to 'enabled', the SBC performs Calling Party Category interworking from SIP to ISUP for this profile.
• historyInfoInterworking – If set to 'enabled', the SBC uses HistoryInfo to interwork between SIP and ISUP for this profile.
• enablePCVTTCParams – If set to 'enabled', the SBC has activated TTC Params of P-Charging-Vector header functionality. If set to disabled, the SBC deactivated the NNI PCV.
  
• setHiPresentationRestricted - When set to enabled, the SBC sends the APRH (Address Presentation Restricted Indicator) as "Presentation Restricted" irrespective of privacy information in the History-Info (HI) header.
  
• addUserEqualPhoneforDivHiInterworking - When set to enabled, the SBC sends user=phone and the mp parameter to history-info header, but only for Diversion-History-Info interworking.
  
• contractorNumInterworking - When set to enabled, it allows interworking of the parameter contractorNumber to/from the ttc-charging-params information in the SIP header P-Charging-Vector.
  

X-Header Signaling Profile configuration details.

• P-HeaderExtensions – Prescribed behavior associated with P-Area-Info header.
• X-Header-default-value – Configured default values of X-Headers.
• X-HeaderExtensions – For each configured extension, if RecvHeader is enabled, the SBC is allowed to receive the specified X-Header on the ingress leg. Likewise, if SendHeader is enabled, the SBC will honor sending the X-Header on th egress leg.
• X-HeaderFlags – Collection of X-Header control flags.
  • recvCfn – If enabled, the SBC can interwork INFO messages with CONFUSION message types to ISUP.
  • recvResume – If enabled, the SBC can interwork INFO messages with RESUME message types to ISUP.
  • recvSuspend – If enabled, the SBC can interwork INFO messages with SUSPEND message types to ISUP.
  • sendCfn – If enabled, the SBC can interwork ISUP messages CONFUSION messages to the SIP side.
  • sendResume – If enabled, the SBC can interwork ISUP messages RESUME messages to the SIP side.
  • sendSuspend – If enabled, the SBC can interwork ISUP messages SUSPEND messages to the SIP side.

Access Transfer Profile configuration to define Access Transfer Control Function (ATCF) behavior in support of the Single Radio Voice Call Continuity (SRVCC) functionality

• id – The designated identifier for this configuration.

If a field below is set to 'enabled', the described behavior is turned on:

• accessTransferPolicyProfileType – The policy profile type to use for this Access Transfer profile.
• mscAssistedMidCall – MSC assisted mid-call support
• psCsAlertingSRVCC – PS-to-CS alerting call transfer
• psCsAlertingSRVCC – CS-to-PS alerting call transfer
• csPsSRVCC – CS-to-PS call transfer
• psCsPreAlertingSRVCC – PS-to-CS pre-alerting call transfer
• csPsPreAlertingSRVCC – CS-to-PS pre-alerting call transfer
• includeATCF – Specifies wheter to always include ATCF or include it based on the below criteria:
• roamingUE – If enabled, ATCF is included in the registration path when the UE is roaming.
• nonRoamingUE – If enabled, ATCF is included in the registration path when the UE is non-roaming.
• eutran – If enabled, ATCF is included in the registration path when the registration request from UE is received over E-UTRAN access type.
• utran – If enabled, ATCF is included in the registration path when the registration request from UE is received over UTRAN access type.

• <name> - The name of the Called Prefix Match Profile. The SBC allows for a maximum of 10 Called Prefix Match Profiles, and each profiles allows a maximum of 50 prefix match objects.
• <prefixMatch> - The prefix that the SBC matches for the called number. This object is not displayed in the table, as it is just a container for the following parameters:
• stringPattern - The regex pattern for the matched string (1-12 digits, 'X' or 'x' characters).
• startPosition - The position of the string (0-11) from which the matching starts.
• digitLength - The maximum number of digits from the start position that can exist in the string for it to be considered as a match. The total number of digits in the string is less than or equal to the sum of the values of startPosition and digitLength. The digitLength allows for a maximum of 30 digits.

• <carrierCode> - Specifies the carrier code (4-digit numeric string consisting of digits in the range 0-9) mapped to Inter Operator Identifier. The SBC allows configuring a maximum of 200 entries for each carrierCodeToIoiMappingProfile.
• accessParam - Specifies the access parameters for the carrier.
  • class
  • type
• accessValue - Specifies the access value string ((1-64 characters)) associated with the accessParam chosen for the carrier.
• ioi - Specifies the Inter Operator Identifier (IOI) string (1-128 characters) for the carrier.

Displays information about GT Profile Parameters.

• <name> - Name of the GT Profile.
• gtCriteriaIndex - Displays the GT Criteria Index.
• gtMethod -Displays the GT Method.
• gtHeader -Displays the GT Header.
• gtString -Displays the GT String.

• <name> - Specifies the Inter Operator Identifier (IOI) string mapped to the carrier code. The SBC allows configuring a maximum of 200 entries for each ioiToCarrierCodeMappingProfile.
• carrierCode - Specifies the carrier code (4-digit numeric string consisting of digits in the range 0-9) mapped to Inter Operator Identifier.

IP Signaling Profile configuration details for the following parameters.

• commonIpAttributes
• egressIpAttributes
• ingressIpAttributes
• ipProtocolType
• trfParameters (Applies to SIP IPSP only)

NOTE: For descriptions of the various attributes and enums, refer to:

• IP Signaling Profile - H.323 - CLI
• IP Signaling Profile - SIP - CLI
  

ISUP Signaling Profile configuration details.

NOTE: For descriptions of the various attributes and enums, refer to ISUP Signaling Profile - CLI.

Number Globalization Profile details.

• name – Number Globalization Profile name.
• number – The number type for analysis.
• digitType – Digit type(s) to apply to the specified number.
• countryCodeSource – Specifies the source of the country code (destination, origination)
• globalize – If enabled, globalization is enabled for this profile entry.

• name – Register Contact Profile name
• contactIncludeVariables – Specifies the element or elements within the Contact header (userpart, hostpart, or both) to use as additional keys when creating or retrieving RCBs.

Stream Control Transmission Protocol (SCTP) Profile configuration details.

• name – SCTP Profile name
• outboundStreams – The number of Outbound Streams for this SCTP profile.
• inboundStreams – The number of Inbound Streams for this SCTP profile.
• peerTransportAddresses – The number of Peer Transport Addresses for this SCTP profile.
• retransmissionsPerPath – The number of Retransmissions per path for this SCTP profile. 
• heartbeatInterval – The SCTP heartbeat interval, in seconds.
• orderedDelivery – If enabled, the SBC uses ordered delivery in this SCTP profile.
• sackDelay – Specifies if SACK Delay is enabled or disabled in this SCTP profile.
• retransmissionsPerAssociation – The maximum number of retransmissions to apply per SCTP association.
• rtoInitial – The SCTP Retransmission Timeout (RTO) initial value in milliseconds.
• rtoMin – The SCTP RTO minimum value in milliseconds.
• rtoMax – The SCTP RTO maximum value in milliseconds.
• initRetry – The maximum number of INIT retries for this SCTP profile.
• pathMtu – The maximum packet size (Maximum Transmission Unit [MTU]), in bytes, to transmit.
• idleTimeout – The SCTP idle timeout interval in seconds.

Signaling Profile configuration details.

NOTE: For descriptions of the various attributes and enums, refer to Signaling Profile - CLI.

Signaling QoS Key Performance Indicator (KPI) profile configuration details.

• name – The name of the Signaling QoS KPI Profile.
• profileActive – If set to 'enable', this profile is active.
• asr – If set to 'enable', Answer Seizure Ratio (ASR) KPI feature is active.
• asrThreshold – ASR theshold percentage setting.
• clu – If set to 'enable', Call Limit Utilization (CLU) KPI feature is active.
• cluThreshold – CLI threshold percentage setting.
• scru – If set to 'enable', Sustained Call Rate Utilization (SCRU) KPI feature is active.
• scruThreshold – SCRU threshold percentage setting.
• pgrd – If set to 'enable', Post-Gateway Ringing Delay (PGRD) KPI feature is active.
• pgrdThreshold – PGRD threshold percentage setting.
• kpiExpression – The KPI expression for this Signaling QoS KPI profile.

Profile defining SIP Message Manipulation (SMM) rules.

NOTE: For descriptions of the various attributes and enums, refer to SIP Adaptor Profile - CLI.

Profiles defining SIP Cause Code mapping.

• cpcToSipCauseMapProfile – This table contains information about each CPC-to-SIP Cause Mapping Profile on the node. For descriptions of the various attributes and enums, refer to CPC to SIP Cause Map Profile - CLI.
• internalSipCauseMapProfile – This table contains information about each Internal cause to SIP Cause Mapping Profile on the node. For descriptions of the various attributes and enums, refer to Internal SIP Cause Map Profile - CLI.
• sipToCpcCauseMapProfile – This table contains information about each SIP-to-CPC Cause Mapping Profile on the node. For descriptions of the various attributes and enums, refer to SIP to CPC Cause Mapping Profile - CLI.

SIP Filter Profile configuration details.

• name – SIP Filter Profile name.
• header – List of headers attached to this SIP Filter Profile to parse for a particular Trunk Group.

• <name> - The name of the SIP JJ-90.30 Interworking Profile. The SBC allows configuring a maximum of 32 sipJJ9030InterworkingProfile(s).
• addUserEqualPhoneforDivHiInterworking - Enable this parameter to add "user=phone" and the "mp" parameter for diversionHistoryInfoInterworking.
• bciCalledPartyCategory - The Backwards Call Indicators Called Party Category. This parameter is displayed when the parameter sipFlavor is set to SIP-ttc-charging-params.
  • noIndication
  • ordinary
  • payphone
  • spare
• bciChargeIndicator - The Backwards Call Indicators Charge Indicator. This parameter is displayed when the parameter sipFlavor is set to SIP-ttc-charging-params.
  • charge
  • noCharge
  • noIndication
  • spare
•  bciTerminatingIsdnAccess - The Backwards Call Indicators Terminating ISDN Access Indicator. This parameter is displayed when the parameter sipFlavor is set to SIP-ttc-charging-params.
  • isdn
  • noIsdn
• chargeAreaInformation - The Charge Area Information, consisting of 5 digits (0-9).
•  origIoi - The name (1-128 characters) of Originating Inter Operator Identifier.
• originatingCarrierCode - The Originating Carrier Code, consisting of 4 digits (0-9). This parameter is mandatory when the parameter sipFlavor is set to JJ9030.
• setHiPresentationRestricted - When enabled, the Presentation Indicator is set to "restricted" for historyInfoInterworking.
• sipFlavor - The flavor of the SIP parameters and procedures used for this interworking profile.
  • JJ9030
  • SIP-T
  • SIP-ttc-charging-params
• termIoi - The name (1-128 characters) of the Terminating Inter Operator Identifier.
• transitIcidInInvite - When enabled, the SBC transits the icid-value in P-Charging-Vector transparently in the INVITE sent on the current trunk for JJ90.30 to JJ90.30 calls.
• transitPcv - When enabled, the SBC transits icid-value, orig-ioi and term-ioi of P-Charging-Vector transparently in JJ90.30 to JJ90.30 calls, using the current trunk group.