Before software upgrade, perform the following procedure to verify the system linkset and link, routeset and route, and VNode counts.
Verify the System Links
Start
From the Main menu, click MTP3.
Click All Links.
Make a note of the number and status of each link.
After you completed the upgrade, verify that the number and status of links are the same as before the upgrade.
Verify the System Linksets
Start
- From the Main menu, click MTP3.
- Click All Linksets.
Make a note of the number and status of each linkset.
After you completed the upgrade, verify that the number and status of linksets are the same as before the upgrade.
Verify the System Routesets and Routes
Start
- From the Main menu, click MTP3.
- Click All Routesets.
Make a note of the number and status of each routeset.
- After you completed the upgrade, verify that the number and status of routesets is the same as before the upgrade.
Verify the System VNodes
Start
- From the Main menu, click MTP3.
- Click the first NA in the MTP3 NA Selection.
- Click VNodes.
- Make a note of the number and status of each VNode.
- Repeat this procedure for each NA in in the MTP3 NA Selection.
- After you complete the upgrade, verify that the number and status of the VNodes are the same as before the upgrade.