In this section:


This is the list of SIP servers or registrars that are allowed when enabling the Limit Outbound and Limit Inbound options.

  1. Choose VoIP ALG > SIP.

  2. Scroll to List of Allowed [Maximum 50] SIP Servers table.

  3. The List of Allowed [Maximum 50] SIP Servers table contains the following information:
    • SIP Server Address/FQDN – Specifies the SIP Server IP address.
    • Port – Specifies the SIP server or SBC port.
    • Transport – Specifies the transport protocol used.
    • Action – Allows you to remove entries.

Manage List of Allowed SIP Servers

To manage SIP servers In the List of Allowed SIP Servers table:

  • Click Delete All to remove all entries.

  • To delete an individual SIP server entry, click the Delete icon corresponding to that entry.

Add New Allowed SIP Server

To add a new SIP Server to the List of Allowed SIP Servers:

  1. In the SIP Server Address/FQDN field, enter the required SIP server address. URLs are not allowed in this field.

  2. In the Port field, enter SIP Server or SBC port.

  3. Choose the the transport protocol from the drop-down list. The following options are available:
    • UDP
    • TCP
    • TLS
    • ANY
  4. Click Add. The new SIP Server Address is added to the List of Allowed SIP Servers table.
  5. Click Submit to apply your configuration changes. For more information on submitting your changes, refer to Submit Configuration Changes.


Note

You can add a maximum of 50 SIP servers to the List of Allowed SIP Servers table.