This screen defines the controls the X and P Header behavior applicable to this trunk group.

To View and Edit X-Headers

On the SBC main screen, go to Configuration > System Provisioning > Category: SIP Carrier Peering > Signaling > X-Headers or
All > Address Context > Zone > SIP Trunk Group > Signaling > X-Headers


The X-Headers can be checked for each Address Context, for each Zone, for each Sip Trunk Group created or for all the Address Contexts, Zones and Sip Trunk Groups created. Use the drop-down box to select the desired Address Context, Zone and Sip Trunk Group.

The Edit X-Headers window is displayed.

Figure 1: SIP Carrier Peering - Signaling - X-Headers

The following fields are displayed:

Table 1: X-Headers Parameters

Parameter

Description

Header Flag

Select header type allowed on SIP trunk group.

  • None (default)
  • X Headers

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.


  • No labels