In this section:

This section specifies the Privacy parameters for Egress Ip Attributes.

To View and Edit Privacy - Flags

On SBC main screen, go to Configuration > System Provisioning > Category: Trunk Provisioning > Ip Signaling Profile > Egress Ip Attributes > Privacy > Flags. The Flags window is displayed.

DEFAULT_H323

On the Flags window, choose the Ip Signaling Profile as DEFAULT_H323 to view the Privacy-Flags parameters for H323 Trunk Group.

Figure 1: Trunk Provisioning - Egress Ip Attributes H323 Privacy-Flags

There are no Privacy-Flags parameters for DEFAULT_H323 type of Egress Ip Attributes.

DEFAULT_SIP

On the Flags window, choose the Ip Signaling Profile as DEFAULT_SIP to view the Privacy-Flags for SIP Trunk Group.

Figure 2: Trunk Provisioning - Egress Ip Attributes SIP Privacy-Flags

The following fields are displayed:

Table 1: Egress Ip Attributes SIP Privacy Parameters

Parameter

Description

Include Privacy

Specifies whether to enable the Privacy flag for Egress IP Attributes or not.

 The options are: 

  • enable (default)  
  • disable
Privacy Required By Proxy

Specifies whether to enable the Privacy Required by Proxy flag for Egress IP Attributes or not.

The options are:

  • enable  
  • disable(default)  
 Ms Lync Privacy Support

Specified whether to enable the Microsoft Lync Privacy Support flag for Egress IP Attributes or not.

The options are:

  • enable   
  • disable(default) 
Include Embedded PAIHeader In Redirected Invite 

 Specifies whether to include the embedded PAI headers in the redirected invites or not. 

The options are:

  • enable   
  • disable(default)

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.


  • No labels