In this section:
This section describes Process Event commands related to the Ribbon Signaling Systems.
Verbs and modifiers are separated by hyphens ( - ), attribute fields (TID, AID, CTAG, and General Block) are separated by colons (:), and every command is terminated by a semicolon (;).
Any attribute that contains TL1 special characters [ equal signs ( = ), colons ( : ), dashes ( - ), and commas ( , ) ] should be enclosed in double quotes ( " ) to help the attribute values escape.
Refer to Input Command Structure for more information.
The following figure shows the Process Event objects that can be configured using TL1 commands.
This section includes the information for the Process Event command set.
VFY-PEVTS::[<Process Events/Name>]:[CTAG];
::[<Process Events/Name>]:<APP_NAME=string>,<COUNT=int>;
Name - Position 1
Type: string
Description: Process Events unique application name.
APP_NAME - NAME
Permissions: Read-only
Type: string
Description: Process Events unique application name.
COUNT - Count
Permissions: Read-only
Type: int
Description: Number of Process Event objects.
VFY-PEVT::[<Process Events/Name>]-[<Process Event/Slot>-<Process Event/Name>]:[CTAG];
::[<Process Events/Name>]-[<Process Event/Slot>-<Process Event/Name>]:<SLOT=int>,<NAME=string>,<INIT=FeatureInit>,<TRAFFIC=PeerTrafficStatus>,<LOWER_LAYER=FeatureLayerConn>,<FILE_WRITE=FeatureSuccess>,<SLOT_MGR=FeatureConn>,<STATS_MGR=FeatureConn>,<IMF_MGR=FeatureConn>;
Slot - Position 1
Type: int
Description: Process corresponding slot. In certain deployments where an application has more than one process on a given slot, the name attribute must be used to properly identify the process. In PCE, the slot represents the LDL peer ID for cross-mate STP support.
Name - Position 2
Type: string
Description: Process corresponding name.