In this section:
Use this object to configure the Prefix Profile.
To View Entry
On SBC main screen, go to Configuration > Profile Management > Category: Digit Parameter Handling Profiles > Prefix Profile > Entry.
Select the desired Prefix Profile from the drop-down list to view its respective Entry parameters.
The Entry window is displayed.
Figure 1: Profile Management - Digit Parameter Handling Profiles - Prefix Profile - Entry
To Edit Entry
To edit any of the Entry in the list, click the radio button next to the specific Entry name.
The Edit Selected Entry window is displayed below.
Figure 2: Profile Management - Digit Parameter Handling Profiles - Prefix Profile - Entry Edit Window
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.
To Create Entry
To create a new Entry, click New Entry tab on the Entry List panel.
Figure 3: Profile Management - Digit Parameter Handling Profiles - Prefix Profile - Entry Fields
The Create New Entry window is displayed.
Figure 4: Profile Management - Digit Parameter Handling Profiles - Prefix Profile - Entry Create Window
The following fields are displayed:
Table 1: Prefix Profile - Entry Parameters
Parameter | Description |
|---|---|
Matching Pattern | The pattern to match against a dialed number from the start position. |
| The location in the dialed number to start a given prefix match. For the majority of matches, it will be the first dialed digit, which is start location 0. |
| The number of digits expected in the dialed number. |
| The maximum number of digits expected in the dialed number. |
| Specify the Call Type for which this service exception applies:
|
| If Called or Calling Digit Type is selected as the escape type, select the digit type from the list. Values are:
|
| Rules for standard digit manipulation (DM), Dialed Number Identification Service (DNIS) digit manipulation, and parameter manipulation (PM).
|
| From the drop-down list, select the nature of address for the traffic controls. The nature of address of the number (specified by the national ID and country code) to which to apply the specified traffic flow control profile. The options are:
|
| The numbering plan indicator (NPI) to be assigned to a number when a match succeeds.
|
| The number of leading digits to be considered part of the prefix. The options are:
|
| The number of leading digits to be stripped. |
Apply Dm Rule | Enable to apply Dm/Pm Rule.
|
Determine Area | When this flag is enabled, the area code is determined from the analyzed digits.
|
To Copy Entry
To copy any of the created Entry and to make any minor changes, click the radio button next to the specific Entry to highlight the row.
Click Copy Entry tab on the Entry List panel.
Figure 5: Profile Management - Digit Parameter Handling Profiles - Prefix Profile - Entry Fields
The Copy Selected Entry window is displayed along with the field details which can be edited.
Figure 6: Profile Management - Digit Parameter Handling Profiles - Prefix Profile - Entry Copy Window
Make the required changes to the required fields and click Save to save the changes. The copied Entry is displayed at the bottom of the original Entry in the Entry List panel.
To Delete Entry
To delete any of the created Entry, click the radio button next to the specific Entry which you want to delete.
Click Delete at the end of the highlighted row. A delete confirmation message appears seeking your decision.
Click Yes to remove the specific Entry from the list.
Overview
Content Tools