DO NOT SHARE THESE DOCS WITH CUSTOMERS!

This is an LA release that will only be provided to a select number of PLM-sanctioned customers (PDFs only). Contact PLM for details.

This section specifies the ASR signaling quality measurement.

To View and Edit Qoe - Asr

On SBC main screen, go to Configuration > System Provisioning > Category: Trunk Provisioning > Trunk Group > H323Trunk Group > H323 Trunk Advanced > Qoe > Asr. The Asr window is displayed.

The Qoe - Asr can be checked for each Address Context, for each Zone, for each H323Trunk Group created or for all the Address Contexts, Zones and H323Trunk Groups created. Use the drop-down box to select the desired Address Context, Zone and H323Trunk Group.

The Edit Asr window is displayed.

H323 Trunk Advanced - Qoe - Asr Edit Window

 

The following fields are displayed:

H323 Trunk Advanced - Qoe - Asr Parameters


Parameter


Description

Default Qos  Asr

Specifies the default value to be used as ASR when no calls are made for a sampling period. The value range from 0 - 100 and the default value is 90.

Critical Qos  Asr Limit

Specifies the critical ASR limit, below which the call admission should be stopped. The value range from 0 - 70 and the default value is 40.

Major Qos Asr  Limit

Specifies the major ASR limit, below which the call admission should be reduced. The value range from 0 - 90 and the default value is 70.

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.

  • No labels