DO NOT SHARE THESE DOCS WITH CUSTOMERS!
This is an LA release that will only be provided to a select number of PLM-sanctioned customers (PDFs only). Contact PLM for details.
In this section:
This section describes CLI syntax and parameters for the SIP Trunk Group 'callReservation' object.
Use callReservation object to reserve a portion of the resources for specific call direction or type for the specified SIP trunk group.
As a best practice, always use UPPERCASE for trunk group names.
% set addressContext <name> zone <name> sipTrunkGroup <name> callReservation inbound <0-100> incomingCallMinimum <0-128> outgoingCallMinimum <0-100> priorityCallMinimum <0-100> silc MC1Percent <0-100> MC2Percent <0-100> state <disabled | enabled> state <disabled | enabled>
SIP Trunk Group Call Reservation Parameters
Parameter | Length/Range | Description |
---|---|---|
inbound | 0-100 | The percentage of callLimit reserved for handling inbound calls. Enter value in 5 percent increments. (default = 0). |
incomingCallMinimum | 0-128 | Minimum number of incoming call allowed when reservations are enabled. (default = 1) |
outgoingCallMinimum | 0-100 | Minimum percent of outgoing call allowed when reservations are enabled. (default = 10) |
priorityCallMinimum | 0-100 | Minimum number of priority call allowed when reservations are enabled. (default = 1). |
silc | N/A | Specifies the SILC traffic control configuration.
|
state | Administrative state to disable or enable the call reservation feature on a SIP trunk group.
|