DO NOT SHARE THESE DOCS WITH CUSTOMERS!

This is an LA release that will only be provided to a select number of PLM-sanctioned customers (PDFs only). Contact PLM for details.

 

Use this command to allow the SBC to pick the SIP Header for anonymous call handling.

Note

This command does not apply to the 'show status' command. 


Command Syntax

% set addressContext <addressContext name> zone <zone name> sipHeaderForAnonymousCall <none | remotePartyId>

Command Parameters

SIP Header For Anonymous Call Parameter

Parameter

Length/Range

Description

sipHeaderForAnonymousCall

N/A

Set this parameter to remotePartyId to allow the SBC to pick the SIP Header for calls from surrogate registered endpoints when the username in the FROM header is received as anonymous.

  • none (default) – The SBC uses default anonymous call handling behavior whereby the call is allowed if the requireRegistration flag is set to supported/supported-group.
  • remotePartyId – The SBC picks the SIP Header when a username in the FROM header is received as anonymous.

 

  • No labels