DO NOT SHARE THESE DOCS WITH CUSTOMERS!
This is an LA release that will only be provided to a select number of PLM-sanctioned customers (PDFs only). Contact PLM for details.
In this section:
Platform Management provides options to:
To install SBC, refer to SBC Core Software Installation and Upgrade Guide.
On the SBC main screen, go to Administration > System Administration > Platform Management. The Platform and SBC Application Controls window is displayed.
Platform and SBC Application Controls
The following fields are displayed:
Platform Management
Parameter | Description |
---|---|
| Displays the status of the SBC application:
|
HA Peer Status | Displays the absence or the presence of HA pair:
|
Process Status | Process status displays the status of the processes. Click Refresh to get the current status of the processes. |
The following buttons are displayed:
Platform Management Buttons
Buttons | Description |
---|---|
| This button starts the SBC application. Start SBC Application is disabled when SBC application is up and running. |
Stop | This button stops the SBC application. Stop SBC Application is disabled when SBC application is down. |
Restart | This button restarts the SBC application. |
Reboot Platform | This button reboots the SBC server. |
Log on to the SBC application in EMA Platform Mode.
If the application is down, then by default you are logged on EMA Platform Mode. For more information on different modes, refer to EMA Platform Mode.
On the SBC main screen, go to Administration > System Administration > Platform Management. To start the SBC application, click Start SBC Application in the Status panel.
Start SBC Application Panel
The Application Status changes from Down to Not Ready.
Start SBC Application - Down
After all the processes are up and running, the Application Status changes to Running. Once the application is started, you may log off from EMA Platform Mode and log on again in EMA mode.
It takes a while for all the processes and the SBC application to start.
Start SBC Application - Running
Stopping the SBC application causes service interruption.
On the SBC main screen, go to Administration > System Administration > Platform Management. To stop the SBC application, click Stop SBC Application in the Status panel.
Stop SBC Application panel
The About to Stop SBC Application Warning window is displayed.
About to stop SBC Application
Click OK to continue. The User Logged Out window is displayed.
User Log Out
Click OK to log out. The EMA Log On window is displayed.
EMA Platform Mode - Login Screen
You are forced to log off from the SBC application because you just stopped the application and EMA mode is down. For more information on different modes, refer to EMA Platform Mode.
To check the SBC Application status, log on again in EMA Platform Mode. On the SBC main screen go to Administration > System Administration > Platform Management.
Verify that the Application Status is down.
Whenever SBC application is down, by default you are logged on EMA Platform Mode.
Stop SBC Application - Down
Restarting the SBC application causes service interruption.
On the SBC main screen, go to Administration > System Administration > Platform Management. To restart the SBC application, click Restart SBC Application on the Status panel.
SBC Application panel
The About to Restart SBC Application Warning window is displayed.
About to restart SBC Application
Click OK to continue. The User Logged Out window is displayed.
User Log Out
Click OK to log out. The Log On window is displayed.
You are forced to log off from the SBC application because the application is stopped and EMA mode is down. For more information on different modes, refer to EMA Platform Mode
It takes a while for the SBC application to restart. During the restart process, you cannot log on SBC Application in EMA mode.
Refresh the log on browser window to verify that EMA mode is available.
EMA Mode - Login Screen
Once the EMA mode is available, log on again. On the SBC main screen go to Administration > System Administration > Platform Management.
Rebooting the platform causes service interruption.
On the SBC main screen, go to Administration > System Administration > Platform Management. To reboot the platform, click Reboot Platform on the Status panel.
Reboot Platform
The About to restart SBC Application Warning window is displayed.
About to Reboot Application
Click OK to continue. A server rebooting message is displayed.
Reboot takes 2-3 minutes.
Once re-boot is complete, the Log On window is displayed.