DO NOT SHARE THESE DOCS WITH CUSTOMERS!

This is an LA release that will only be provided to a select number of PLM-sanctioned customers (PDFs only). Contact PLM for details.

In this section:

 

Configuring Diam Node

set addressContext ADDR_CONTEXT1 diamNode DIAMNODE originRealm sbc.com primaryOriginHost primary.sbc.com secondaryOriginHost secondary.sbc.com transactionTimeout 6000 ipInterfaceGroupName LIF1 ipV4Address 172.16.13.120
set addressContext ADDR_CONTEXT1 diamNode DIAMNODE state enabled
commit
set addressContext ADDR_CONTEXT1 diamNode DIAMNODE peer RX.EXAMPLE.COM fqdn htpcgw01.ims.mnc094.mcc235.3gppnetwork.org ipAddress 172.16.13.30
commit
set addressContext ADDR_CONTEXT1 diamNode DIAMNODE peer RX.EXAMPLE.COM state enabled
commit
set addressContext ADDR_CONTEXT1 diamNode DIAMNODE realmRoute RX.EXAMPLE.COM realm ims.mnc094.mcc235.3gppnetwork.org peer RX.EXAMPLE.COM appId rx
commit
set addressContext ADDR_CONTEXT1 diamNode DIAMNODE realmRoute RX.EXAMPLE.COM state enabled
commit
set addressContext ADDR_CONTEXT1 zone ZONE1 sipTrunkGroup TG_PCSCF_INT_IP media pcrf pcrfRealm ims.mnc094.mcc235.3gppnetwork.org pcrfCommitment supported cushionPacketSize enabled cushionNullSdp enabled

Configuring Signaling Path

set addressContext ADDR_CONTEXT_1 zone ZONE1 sipTrunkGroup TG_PCSCF_INT_IP media pcrf signallingPath enabled
commit

Configuring Fetch Location Information

set addressContext ADDR_CONTEXT_1 zone ZONE1 sipTrunkGroup TG_PCSCF_INT_IP media pcrf fetchLocationInfo retrieveInAnswer
commit

Configuring Provision Signaling Flow

set addressContext ADDR_CONTEXT_1 zone ZONE1 sipTrunkGroup TG_PCSCF_INT_IP media pcrf provSignalingFlow enabled
commit

Configuring Terminate On Network Failure

set addressContext ADDR_CONTEXT_1 zone ZONE1 sipTrunkGroup TG_PCSCF_INT_IP media pcrf terminateOnNwFailure enabled
commit

Configuring Insert P-Access-Network-Info Header

set profiles signaling ipSignalingProfile DEFAULT_H12 commonIpAttributes flags insertPAccessNetworkInfo enable
commit

Configuring Insert UE Flow Information

set profiles signaling ipSignalingProfile DEFAULT_H12 commonIpAttributes flags insertUEFlowInfo enable
commit

  • No labels