In this section:

Modified: for 9.2.3



Use the Trigger Type Priority object to configure the CPE (Call Processing Element) type priority which determines the order in which the number translation criteria lookups are performed. Each CPE type configured must include its own unique priority.  

Command Syntax

% set profiles digitParameterHandling triggerTypePriority
	cpeType <calledUri | callingNumber | carrier | gnAdditionalCalling | none | tgWithCallingNumber | tgWithgnAdditionalCalling | toHeader | trunkGroup>
	tgWithCallingNumber <disable | enable> 
		cpePriority <0-255>
		includeCalledParty <disabled | enabled>
		includeCallingParty <disabled | enabled>
	tgWithGnAdditionalCalling <disable | enable> 
		cpePriority <0-255>
		includeCalledParty <disabled | enabled>
		includeCallingParty <disabled | enabled>
	trunkGroup <disable | enable> cpePriority <0-2>

Command Parameters

The Trigger Type Priority parameters are as shown below.


Trigger Type Priority Parameters

Parameter

Description

cpeType

Specify the Call Processing Element (CPE) Type to use for this Trigger Type Priority. 

  • calledUri
  • callingNumber
  • carrier
  • gnAdditionalCalling
  • none
  • tgWithCallingNumber
  • tgWithgnAdditionalCalling
  • toHeader
  • trunkGroup

 tgWithCallingNumber

Specify the action to take for a trunk group . 

  • includeCalledParty – Include the Called Party while matching the trigger criteria.
    • disabled 
    • enabled 
  • includeCallingParty – Include the Calling Party while matching the trigger criteria.
    • disabled 
    • enabled
  • cpePriority <0-255> – Specify the priority of this CPE Type. A priority of '0' is the highest priority.
 tgWithGnAdditionalCalling CPE type tgWithGnAdditionalCalling configuration details. 
  • includeCalledParty – Include the Called Party while matching the trigger criteria.
    • disabled
    • enabled 
  • includeCallingParty – Include the Calling Party while matching the trigger criteria.
    • disabled 
    • enabled
  • cpePriority <0-255> – Specify the priority of this CPE Type. A priority of '0' is the highest priority.
trunkGroup

CPE type trunkGroup configuration details. 

  • includeCalledParty – Include the Called Party while matching the trigger criteria.
    • disabled 
    • enabled 
  • includeCallingParty – Include the Calling Party while matching the trigger criteria.
    • disabled 
    • enabled
  • cpePriority <0-255> – Specify the priority of this CPE Type. A priority of '0' is the highest priority.