Use the Remove Enhanced DBL Entry window to remove specific entries from the list of Enhanced DBL entries based on source IP address.

To Remove an Enhanced DBL Entry 

  1. On the SBC main screen, navigate to All > Address Context > Enhanced DBL > Remove Enhanced DBL Entry.

  2. Select the address context from the Address Context list. The Commands list appears as shown below.

    Commands - dropdown list

  3. Select Remove IP Entry from the Commands list and click Select. The removeIP Entry window opens.

    Remove IP Entry window

  4. Use the following table to edit the fields and then click removeIpEntry.

    Remove IP Entry Parameters

    ParameterDescription
    Source IP AddressThe source IP address (IPv4/IPv6) of the the enhanced DBL entry.
    Source Port

    The port (0-65535) used by the source IP address. The default value is 0.

    Note: A value of "0" means no port is used.

    Transport

    The transport protocol used. The following options are available in the drop-down list:

    • None (default)
    • SCTP
    • TCP
    • Tls-tcp
    • UDP

  5. Confirm the removal when prompted.

  • No labels