Use the Redirection Capability Flags window to configure the egress redirection capability flags for call redirection scenarios.

To View and Edit Redirection Capability Flags

On the SBC main screen, go to Configuration > Profile Management > Category: Signaling Profiles > Signaling Profile > Egress > Redirection Capability Flags or
All > Profiles > Signaling > Signaling Profile > Egress > Redirection Capability Flags

Select the Signaling Profile you want to configure from the drop-down list. The Redirection Capability Flags window is displayed.

Redirection Capability Flags Window

 

 

Use the following table to configure the options and then click Save.

Redirection Capability Flags Parameters

Parameter Description
Enable Redirection CapabilityEnable this option to allow redirection capabilities to be sent in the policy response to the SBC.
Called Directory Number

Specifies whether to send the details of the directory number from which the calls were made. The options are:

  • Send
  • Dont Send
  • No Input

Note: This parameter is visible only when you enable Enable Redirection Capability.

 

Additional topics:

  • No labels