This section provides information on logging into the SBC REST API.

Perform the following steps to login to SBC REST API:

  1. Create a new user or use existing admin user.

  2. If the password is not reset, then reset the system-generated password using  CLI or EMA.

  3. In /system/admin/{SYSTEM_NAME}/rest/state, set the rest state to 'enabled'.

  4. In /oam/localAuth/user/{USER}/m2mAccess, set the m2mAccess to 'enabled'.

    Note

    Use CLI, EMA or REST API to perform steps 3 and 4.

  5.  Verify REST API access using the command:

     

     curl -kisu admin:xxxx https://10.54.153.148/api/

     

    If the access is successful, response to the above command will be ' 200 OK'.

 

Refer to SBC Core REST API for SBC 5000/7000/SWe REST API documentation.

  • No labels