To create or modify a Local User:

Note

The Administrator may add and edit users.

  1. In the WebUI, click the Settings tab.
  2. In the left navigation pane, go to Security > Users > Local User Management.

    Local Users Table

Modifying a Local User

To modify a user's access rights:

  1. Click the expand () Icon next to the entry you wish to modify.
  2. Edit the entry properties as required, see details below.

Note:

 Only the Access Level attribute can be modified.

Disabling a Local User

To disable a user:

 

  1. Select the check box next to the entry you wish to disable.
  2. Click the Disable () icon at the top of the table. 

Creating a Local User

  1. Click the Create Local User () icon at the top of the Local User View page.

    Create Local User

     

     

Note

The new user is prompted to enter a new password when they first attempt to log into the SBC 1000/2000 system. The user is not allowed to login until a new password that meets the specified criteria is successfully entered.

Local User - Field Definitions

User Name

Specifies the user name. The name must be 32 characters or less in length and may contain alphanumeric characters (A-Z, a-z, 0-9) only. Usernames may not begin with a digit (0 - 9).

Password/Confirm Password

Specifies the user's new password. Passwords must be 128 characters or less. Passwords may contain a combination of letters, numbers, and special characters. The minimum password length and combination of characters depend on the options specified in the Global Security Options page.

Access Level

Specifies the Access Level granted to the user. For more information about Access Levels, see the Permissions Overview page.