Q-SBC to SBC Core CDR Field Mapping

Related articles:

For deployments in which the SBC Core is configured to generate CDRs in Q-SBC format, the following table indicates how the content for Q-SBC format CDRs is derived. The table lists all of the fields in a standard Q-SBC CDR. The Data Source column identifies where the SBC Core obtains the data if it populates the field. In most cases, the SBC Core derives the data from fields in an SBC Core CDR. Links to descriptions of the source fields appear in the Data Source column. If the data is derived using another source or method, that is listed. If a field in the Q-SBC CDR is not applicable in the SBC Core context (for example, if the field is populated based on a specific Q-SBC configuration), or the data is not currently derived, the Data Source column contains "Currently blank." The last four columns indicate in which specific Q-SBC CDR types (start1, end1, interim, or hunt) SBC Core populates the field.

Fields that are not populated are blank and appear as a single semi-colon character in the generated CDR record. The SBC Core provides the data in the same CDR format for all CDR types.

CDR Field Mapping

Q-SBC CDR Field	Q-SBC CDR Field Name	Data Format and Size	Field Description	Data Source (SBC Core CDR Field or Another Source)	Populated in Q-SBC CDR Types:
Q-SBC CDR Field	Q-SBC CDR Field Name	Data Format and Size	Field Description	Data Source (SBC Core CDR Field or Another Source)	start1	end1	interim	hunt
1	start-time	YYYY-MM-DD HH:MM:SS	Starting date and time of call in the local gateway. HH is between 00 and 23.	Start Time (Date) Start Time (Time) The two fields are joined and converted to Q-SBC format.	Yes	Yes	Yes	Yes
2	start-time	uint32	Gateway starting time of the call in seconds since January 1, 1970 (GMT + Bias).	Start Time In System Ticks The generated value is computed from 1970.	Yes	Yes	Yes	Yes
3	call-duration	HH:MM:SS	Duration of call after the connection was established.	Call Service Duration The value is converted to the Q-SBC format.		Yes	Yes
4	call-source	A.B.C.D string, max 15 chars, or IPv6 address format (colon-hex, compact, lower case), max string length is 45 chars	IPv4 or IPv6 address of the originator gateway.	Ingress Remote Gateway Signaling IP Address	Yes	Yes	Yes	Yes
5	call-source-q931sig-port	uint32	Signaling port for the call.	The field is populated with the SIP signaling UDP/TCP port number used at the "Ingress Remote Gateway" (see field 4).	Yes	Yes	Yes	Yes
6	call-dest	A.B.C.D string, max 15 chars, or IPv6 address format (colon-hex, compact, lower case), max string length is 45 chars	IPv4 or IPv6 address of the terminating gateway.	Egress Remote Gateway Signaling IP Address	Yes	Yes	Yes	Yes
7	Terminator line	Integer	Not used in Q-SBC CDRs.	Currently blank.
8	call-source-custid	Alphanumeric string, max 24 chars	Code identifying the user originating the call.	Currently blank.
9	called-party-on-dest	string, max 64 chars	Called number in E.164 format. Number as out-pulsed to the call terminator.	Called Number Limited to 30 characters.	Yes	Yes	Yes	Yes
10	called-party-from-src	string, max 64 chars	Called number as dialed by the user. Number as sent from the ingress gateway.	Dialed Number Limited to 30 characters.	Yes	Yes	Yes	Yes
11	call-type	string, max 2 chars	Call type code. Possible values: IV - Voice IF - Fax IM - MSRP	Media Stream Stats		Yes
12	Not currently used.		Not used in Q-SBC CDRs.	Currently blank.
13	disconnect-error-type	string, one char.	Call disconnect reason. Possible values: N - Normal A - Abandoned B - Busy E - Error	Call Disconnect Reason		Yes
14	call-error	uint32	Error code of the call.	Currently blank.
15	call-error	string, max 64 chars	Error code text description.	Currently blank.
16	(fax pages)	integer	Not used in Q-SBC CDRs.	Currently blank.
17	(fax priority)	0 - Real time	Not used in Q-SBC CDRs.	Currently blank.
18	ani	string, max 64 chars	Calling number identification. This field is used, if present from remote gateway.	Incoming Calling Number Limited to 30 characters.	Yes	Yes	Yes	Yes
19	media-type	string, 2 chars	The type of media. Possible values: AD - audio VD - video FX - image IM - TCP/MSRP/Chat IM - TCP/TLS/MSRP/Chat FT - TCP/MSRP/File transfer FT - TCP/TLS/MSRP/File transfer NA - Other For calls containing more than one m-line, the field can contain multiple, comma-separated values, one for each m-line.	Media Stream Stats		Yes
20	data-volume-tx-src	integer	Number of bytes forwarded from the source leg. For calls containing more than one m-line, the field can contain multiple, comma-separated values, one for each m-line.	Media Stream Stats For the primary value. For subsequent m-lines, the values come from ingress packetSent[1..n].		Yes
21	data-volume-tx-dst	integer	Number of bytes forwarded from the destination leg. For calls containing more than one m-line, the field can contain multiple, comma-separated values, one for each m-line.	Media Stream Stats For the primary value. For subsequent m-lines, the values come from egress packetSent[1..n].		Yes
22	cdr-seq-no	uint32	Sequence number of the CDR record. System-generated.	Record Sequence Number	Yes	Yes	Yes	Yes
23	transcoder-id	uint32	Specifies transcoder device ID if call was transcoded.	Currently blank.
24	callid	string, max 64 chars	Unique Call ID on ingress. Ingress leg call ID as received from the origination endpoint.	Ingress Protocol Variant Specific Data (Sub-field 2 - Call ID) SBC Core generates only end1 records (not end2), therefore this is the ingress-callid.	Yes	Yes	Yes	Yes
25	call-hold-time	0:00:00	Complete time during which the call occupies network resources, until it is either abandoned or connected. Time between SIP INVITE and CANCEL or 200 OK	Currently blank.
26	call-source-regid	string, max 128 chars	Registration ID of the call originating gateway.	Currently blank.
27	call-source-uport	uint32	Originating gateway port number.	Currently blank.
28	call-dest-regid	string, max 128 chars	Registration ID of the destination gateway.	Currently blank.
29	call-dest-uport	uint32	Port number of the call at the destination.	Currently blank.
30	isdn-cause-code	uint32	ISDN release cause code for call leg1; range 1 to 127. Zero indicates an unknown or unspecified cause code. In route-advance (hunt) CDRs, this field is blank. See field 60 for the equivalent field for leg2.	Ingress Protocol Variant Specific Data The SBC Core provides a cause code mapped from the status reason from CDR field 75. For STOP records, the value is 16.		Yes
31	called-party-after-src-calling-plan	string, max 64 chars	Called number after applying source call plan (translation). Called number after applying the call plan of the source endpoint.	Called Number Before Translation #2 Limited to 30 characters.	Yes	Yes	Yes	Yes
32	call-error-dest	uint32	Error code of the call; present if call is disconnected on leg 2.	Currently blank.
33	call-error-dest	string, max 256 chars	Text description of error in field 32.	Currently blank.
34	call-error-event-str	string, max 256 chars	Used for debugging only.	Currently blank.
35	new-ani	string, max 64 characters	Translated calling number after applying the call plan (translation).	Calling Number Limited to 30 characters.	Yes	Yes	Yes	Yes
36	call-duration	uint32	Duration of call, in seconds, after the connection was established.	Call Service Duration		Yes
37	egress-callid-termination-endpoint	string, max 128 chars	Unique call ID on egress. Call ID generated by the SBC and sent to the termination endpoint.	Egress Protocol Variant Specific Data (Sub-field 2 Call ID) SBC Core generates only end1 records (not end2), therefore this is the egress-callid.	Yes	Yes	Yes
38	protocol	string, max 16 chars	Either sip or h323.	Ingress Signaling Type SBC Core generates only end1 records (not end2), therefore this is the ingress protocol.	Yes	Yes	Yes	Yes
39	cdr-type	string, max 32 chars	CDR type.	Final ATTEMPT Indicator SBC Core CDR types (START, STOP, INTERMEDIATE, ATTEMPT) are mapped to Q-SBC types as follows: START=start1 STOP=end1 INTERMEDIATE=interim ATTEMPT=end1 (if Final ATTEMPT is 1) ATTEMPT=hunt (if Final ATTEMPT is 0)	Yes	Yes	Yes	Yes
40	hunting-attempts	uint32	Current call attempt number (while hunting).	Route Attempt Number	Yes	Yes	Yes	Yes
41	caller-trunk-group	string, 24 chars. max.	Source trunk group ID.	Ingress Protocol Variant Specific Data This is the otg received in the From header or the tgrp received in the Contact header, if present.	Yes	Yes	Yes	Yes
42	call-pdd	uint32	Post dial delay, in milliseconds, from SETUP to ALERTING or Progress Indicator.	Time Elapsed from Receipt of Setup Message to Receipt of Alerting/ProcProg	Yes	Yes	Yes	Yes
43	h323-dest-ras- error	uint32	RAS error return code.	Currently blank.
44	h323-dest-h225-error	uint32	H.225 error return code.	Currently blank.
45	sip-dest-respcode	uint32	Response code received from SIP leg 2, if that leg was SIP and call did not connect successfully.	Egress Protocol Variant Specific Data (Field 19 - Status Message for Call Release) Blank if the call is released successfully.		Yes		Yes
46	dest-trunk-group	string, max 256 chars	Destination trunk group ID.	Egress Protocol Variant Specific Data This is the dtg or tgrp in the Request-URI, if present.	Yes	Yes	Yes	Yes
47	cal-duration- fractional	s.mmm	Call duration in seconds, to thousandths.	Intermediate Time (Time)		Yes	Yes
48	timezone	string, max 64 chars	Local time zone of the SBC.	Node Time Zone	Yes	Yes	Yes	Yes
49	msw-name	string, max 256 chars	The configured SBC host-name or UNIX hostname if not configured. This is also the sipserver name for SIP calls.	Gateway Name	Yes	Yes	Yes	Yes
50	called-party-after-transit-route	string, max 64 chars	Result if a transit route was applied to a called party number (or blank).	Currently blank.
51	called-party-on-dest-num-type	uint32	The called party number type for CDR field 9 (national or international). This field is only applicable for IWF calls.	Called Party Nature of Address	Yes	Yes	Yes	Yes
52	called-party-from-src-num-type	uint32	The called party number type for CDR field 10 (national or international). This field is only applicable for IWF calls.	Dialed Number NOA	Yes	Yes	Yes	Yes
53	call-source-realm-name	string, max 64 chars	Name of the realm from which the call was placed.	Currently blank.
54	call-dest-realm-name	string, max 64 chars	Name of the realm to which the call was placed.	Currently blank.
55	call-dest-crname	string, max 64 chars	Egress route used to complete the call.	Route Selected	Yes	Yes	Yes	Yes
56	call-dest-custid	string, max 64 chars	Egress endpoint customer id.	Currently blank.
57	call-zone-data	string, max 64 chars	Zone for the ingress endpoint.	Ingress Zone Name
58	calling-party-on-dest-num-type	uint32	Calling party number type for CDR field 18. Type sent to the egress endpoint.	Calling Party Nature of Address	Yes	Yes	Yes	Yes
59	calling-party-from-src-num-type	uint32	Calling party number type for CDR field 18. Type received from ingress endpoint.	Incoming Calling Number NOA	Yes	Yes	Yes	Yes
60	original-isdn-cause-code	uint32	Original endpoint-generated ISDN release cause code (leg 2), range 1 to 127. Zero indicates an unknown or unspecified cause code.	Egress Protocol Variant Specific Data The SBC Core provides a cause code mapped from the status reason from CDR field 45. For STOP records, the value is 16.		Yes		Yes
61	packets-received-on-src-leg	uint32	Number of packets received on the source leg (ingress)	Media Stream Stats		Yes
62	packets-lost-on-src-leg	uint32	Number of packets lost + packets discarded on the source leg (ingress).	Media Stream Stats (Ingress packetDiscarded1 + ingress packetLost1)		Yes
63	packets-discarded-on-src-leg	uint32	Number of packets discarded on the source leg (ingress).	Media Stream Stats (Ingress packetDiscarded1)		Yes
64	pdv-on-src-leg	uint32	Packet delay variation on the source leg (ingress) in microseconds.	Ingress Interarrival Packet Jitter		Yes
65	codec-on-src-leg	string, max 64 chars	Type of codec used on the source leg (ingress) of media-routed calls. Contains "unknown" for calls for which the SBC did not route media. Possible values are: g711ulaw g711alaw g729 g729a g723_53 g723_63 g726-16 g726-24 g726-32 g726-40 g728 GSM-FR GSM-HR GSM-EFR G722_64k G722_56k G722_48k AMR-WB EVRC EVRC0 GSM-AMR GSM-AMR_dyn iLBC-30 iLBC-20 EVRC-B EVRC-B0 H263_dyn H264_dyn H261 MPV MP2T H263 unknown invalid	Ingress Codec Type (For audio streams) Media Stream Data (For non-audio streams) SBC Core provides a comma-separated list of codecs.		Yes
66	latency-on-src-leg	uint32	Average packet latency (transit time) in milliseconds as measured by the SBC on the source leg using RTCP or RTCP-XR.	Ingress Last Measurement for Latency Latest latency, not an average.		Yes
67	rfactor-on-src-leg	uint32	R-factor voice quality score. The range for narrow-band codecs is 0 to 100. The range for wide-band codecs is 0 to 129. Includes listening or conversational R-factor.	Ingress Inbound R-Factor		Yes
68	packets-received-on-dest-leg	uint32	Number of packets received on the destination leg (egress).	Egress Number of Audio Packets Received First audio stream only. Values for multiple streams are not reported.		Yes
69	packets-lost-on-dest-leg	uint32	Number of packets lost + packets discarded on the destination leg (egress).	Media Stream Stats (Egress packetDiscarded1 + egress packetLost1)		Yes
70	packets-discarded-on-dest-leg	uint32	Number of packets discarded on the destination leg (egress).	Media Stream Stats (Ingress packetDiscarded1)		Yes
71	pdv-on-dest-leg	uint32	Packet delay variation on the destination leg (egress), in microseconds.	Egress Interarrival Packet Jitter		Yes
72	codec-on-dest-leg	string, max 64 chars	Type of codec used on the destination leg (egress) of media-routed calls. See field 65 for possible values.	Egress Codec Type (For audio streams) Media Stream Data (For non-audio streams) SBC Core provides a comma-separated list of codecs.		Yes
73	latency-on-dest-leg	uint32	Average packet latency (transit time) in milliseconds as measured by the SBC on the destination leg using RTCP or RTCP XR.	Egress Last Measurement for Latency Latest latency, not an average.		Yes
74	rfactor-on-dest-leg	uint32	R-factor voice quality score. The range for narrow-band codecs is 0 to 100. The range for wide-band codecs is 0 to 129. Includes listening or conversational R-factor.	Egress Inbound R-Factor		Yes
75	sip-src-respcode	uint32	SIP response code sent to the ingress point if egress call leg did not connect successfully. In route-advance (hunt) CDRs, this field is blank.	Ingress Protocol Variant Specific Data (Field 19 - Status Message For Call Release)		Yes
76	peer-protocol	string, max 16 chars	Either sip or h323.	Egress Signaling Type SBC Core generates only end1 records (not end2), therefore this is the egress protocol.	Yes	Yes	Yes	Yes
77	src-private-ip	A.B.C.D string, max 15 chars, 15 chars, or IPv6 address format (colon-hex, compact, lower case), max string length is 45 chars	Calling party (source) media IPv4 or IPv6 address.	Media Stream Data		Yes
78	dest-private-ip	A.B.C.D string, max 15 chars, 15 chars, or IPv6 address format (colon-hex, compact, lower case), max string length is 45 chars	Called party (source) media IPv4 or IPv6 address.	Media Stream Data		Yes
79	src-igrp-name	string, max 32 chars	Leg 1 endpoint-group.	Currently blank.
80	dest-igrp-name	string, max 32 chars	Leg 2 endpoint-group.	Currently blank.
81	diversion-info	string, max 512 chars	Call diversion information for SIP calls.	Currently blank.
82	custom-contact-tag	string, max 512 chars	Bid and ask history of an Arbinet server’s redirect arbinet field, in its Contact header.	Currently blank.
83	e911-call	string, max 16 chars	Indicates the call was an emergency call.	Emergency Indicator Field contains "e911" if the Emergency Indicator is set. SBC Core does not support German Notruf processing.	Yes	Yes	Yes	Yes
84	<reserved>	string	Not used in Q-SBC CDRs.	SBC Call ID SBC Core GCID	Yes	Yes	Yes	Yes
85	<reserved>	string	Not used in Q-SBC CDRs.	Currently blank.
86	call-release-source	string, max 16 chars	Indicates the point from which the call was disconnected.	Disconnect Initiator SBC Core maps the Disconnect Indicator values as follows: 0 (Internal) = "internal" 1,3 (calling party) = "calling party" 2,4 (called party) = "called party" Other Q-SBC values are not supported.		Yes
87	hunt-attempts-including-LCF-tries	uint32	Indicates all hunt attempts made, regardless of reason.	Currently blank.
88	call-gapping-error	uint32	Call is dropped due to session-layer rate limiting.	Currently blank.
89	error-code-in-reason-header	uint32	Call is dropped due to outbound call limits.	Currently blank.
90	ocl-object-type	string, max 16 chars	Call is measured against outbound call limits (object type).	Currently blank.
91	ocl-object-id-dtn-regid-realmname	string, max 512 chars	Call is measured against outbound call limits (realm name).	Currently blank.
92	ocl-object-id-dtnrealm-uport	string, max 64 chars	Call is measured against outbound call limits (uport).	Currently blank.
93	ocl-policy-name	string, max 64 chars	Call is measured against outbound call limits (profile name).	Currently blank.
94	src-private-port	uint32	Calling party (source) media port number.	Media Stream Data		Yes
95	dest-private-port	uint32	Called party (destination) media port number.	Media Stream Data		Yes
96	src-realm-media-ip	A.B.C.D string, max 15 chars, or IPv6 address format (colon-hex, compact, lower case), max string length is 45 chars	Media IPv4 or IPv6 address for the source realm.	Media Stream Data		Yes
97	src-realm-media-port	uint32	Media port number allocated on the source realm.	Media Stream Data		Yes
98	dest-realm-media-ip	A.B.C.D string, max 15 chars, or IPv6 address format (colon-hex, compact, lower case), max string length is 45 chars	Media IPv4 or IPv6 address for the destination realm.	Media Stream Data		Yes
99	dest-realm-media-port	uint32	Media port number allocated on the destination realm.	Media Stream Data		Yes
100	src-trunk-context	string, max 64 chars	Source trunk group context.	Ingress Protocol Variant Specific Data (Contact header)	Yes	Yes	Yes	Yes
101	dst-trunk-context	string, max 64 chars	Destination trunk group context.	Ingress Protocol Variant Specific Data (Request-URI)	Yes	Yes	Yes	Yes
102	Leg1_PCV	string, max 512 chars	Contents of SIP P-Charging-Vector header, if present, on leg 1.	Ingress Protocol Variant Specific Data (ICID, IOI)	Yes	Yes	Yes	Yes
103	Leg2_PCV	string, max 512 chars	Contents of SIP P-Charging-Vector header, if present, on leg 2.	Egress Protocol Variant Specific Data (ICID, IOI)	Yes	Yes	Yes	Yes
104	Leg1_PANI	string, max 512 chars	Contents of SIP P-Access-Network-Info header, if present, on leg 1.	Ingress Protocol Variant Specific Data (P-Access-Network-Info header)	Yes	Yes	Yes	Yes
105	Leg2_PANI	string, max 512 chars	Contents of SIP P-Access-Network-Info header, if present, on leg 2.	Egress Protocol Variant Specific Data (P-Access-Network-Info header)	Yes	Yes	Yes	Yes
106	call-connect-time-ms	YYYY-MM-DD HH:MM:SS.sss	Start time of the call, in millisecond precision. Time when the 200 OK message is received for SIP calls.	Time Elapsed from Receipt of Setup Message to Service Established	Yes	Yes	Yes
107	call-end-time-ms	YYYY-MM-DD HH:MM:SS.sss	End time of the call, in millisecond precision.	Disconnect Time (Date) and Disconnect Time (Time)		Yes
108	routingNumber	string, max 64 chars	Local routing number (rn parameter), if present, and only if an npdi parameter is also present.	Currently blank.
109	No of m-lines	uint32	The number of media lines (m-lines) present in the SDP.	Media Stream Stats (Number of streams)		Yes
110	from-uri-user-part	string, max 128 chars	Original user part from the From URI in the ingress INVITE message. Any semi-colon characters are replaced with spaces.	Ingress Protocol Variant Specific Data (Ingress protocol data)	Yes	Yes	Yes	Yes
111	new-from-uri-user-part	string, max 128 chars	User part from the From URI in the egress INVITE message. This field contains the user part after any manipulation occurs. If the user part is not manipulated during processing, this value matches the value in field 110. Any semi-colon characters are replaced with spaces.	Egress Protocol Variant Specific Data (Egress protocol data)	Yes	Yes	Yes	Yes
112	paid-uri-user-part	string, max 128 chars	Original user part from the PAID URI in the ingress INVITE message. This field is populated if a PAID header is present in the incoming message. Any semi-colon characters are replaced with spaces.	Ingress Protocol Variant Specific Data (Ingress protocol data)	Yes	Yes	Yes	Yes
113	new-paid-uri-user-part	string, max 128 chars	User part from the PAID URI in the egress INVITE message This value provides the user part after any manipulation occurs, or from the inserted header if the SBC inserts a PAID header. If the user part is not manipulated during processing, this value matches the value in field 112. Any semi-colon characters are replaced with spaces.	Egress Protocol Variant Specific Data (Egress protocol data)	Yes	Yes	Yes	Yes
114	privacy	string, max 16 characters	Privacy support for SIP calls (Draft-01 support and RFC 3325 support).	Currently blank.
115	request-uri-user-part	string, max 128 chars	Original Request-URI user part in the ingress INVITE message. Any semi-colon characters are replaced with spaces.	Ingress Protocol Variant Specific Data (Ingress protocol data)	Yes	Yes	Yes	Yes
116	new-request-uri-user-part	string, max 128 chars	Manipulated Request-URI user part in the egress INVITE message. This field contains the Request-URI user part after any manipulation occurs. If the user part is not manipulated during processing then this value matches the value in field 115. Any semi-colon characters are replaced with spaces.	Egress Protocol Variant Specific Data (Egress protocol data)	Yes	Yes	Yes	Yes
117	local-refer-status	string, max 8 chars	Indicates the status of SIP local REFER call transfer processing if it is in use.	Currently blank.
118	sip-dest-respreason	string, max 64 chars	Response code text in SIP response corresponding to the code in field 45.	Egress Protocol Variant Specific Data (Field 19 - Status Message For Call Release)		Yes		Yes
119	sip-src-respreason	string, max 64 chars	Response code text in SIP response corresponding to the code in field 75.	Ingress Protocol Variant Specific Data (Field 19 - Status Message For Call Release)		Yes
120	charge-number	String; max 32 characters	Charge Number from the ingress P-Charge-Info Header, if present, or the Charge Number from the ingress ISUP body.	Currently blank.
121	charge-number-noa	integer	Nature of address of the Charge Number from the ingress P-Charge-Info Header, if present, or the Nature of address of the Charge Number from the ingress ISUP body.	Currently blank.
122	charge-number-npi	integer	Numbering Plan Indicator of the Charge Number from the ingress P-Charge-Info Header, if present, or the Numbering Plan Indicator of the Charge Number from the ingress ISUP body	Currently blank.
123	segment-start-time-ms	YYYY-MM-DD- HH:MM:SS:sss	Specifies the connect date and time for the call segment in an interim CDR, in millisecond precision. Only applies to interim CDRs. For the first interim CDR, this value is the same as the “call-connect-time-ms” (field 106). For subsequent interim CDRs this field is the time/date when the last interim CDR was written.	Intermediate Time (Date) and Intermediate Time (Time)			Yes
124	segment-duration-fractional	S.sss	Specifies the duration in seconds for the segment of the call reported by the interim CDR, in millisecond precision. Only applies to interim CDRs	Intermediate Time (Time)			Yes
125	leg1-loss-rate	uint32	For the source leg, the fraction of RTP data packets from the endpoint lost since the beginning of reception, expressed as a fixed point number with the binary point at the left edge of the field.	Audio Stream RTCP-XR Voice Metric Statistics		Yes
126	leg1-discard-rate	uint32	For the source leg, the fraction of RTP data packets from the endpoint discarded since the beginning of reception, due to late or early arrival, under-run or overflow at the receiving jitter buffer.	Audio Stream RTCP-XR Voice Metric Statistics		Yes
127	leg1-burst-density	uint32	For the source leg, the fraction of RTP data packets within burst periods since the beginning of reception that were either lost or discarded. This field is populated and set to zero if no packets have been received.	Audio Stream RTCP-XR Voice Metric Statistics		Yes
128	leg1-gap-density	uint32	For the source leg, the fraction of RTP data packets within inter-burst gaps since the beginning of reception that were either lost or discarded. This field is populated and set to zero if no packets have been received.	Audio Stream RTCP-XR Voice Metric Statistics		Yes
129	leg1-burst-duration	uint32	For the source leg, the mean duration of the burst periods that have occurred since the beginning of reception, in millisecond precision.	Audio Stream RTCP-XR Voice Metric Statistics		Yes
130	leg1-gap-duration	uint32	For the source leg, the mean duration of the gap periods that have occurred since the beginning of reception, in millisecond precision.	Audio Stream RTCP-XR Voice Metric Statistics		Yes
131	leg1-round-trip-delay	uint32	For the source leg, in millisecond precision.	Audio Stream RTCP-XR Voice Metric Statistics		Yes
132	leg1-ES-delay	uint32	For the source leg, the most recently estimated end system delay, in millisecond precision.	Audio Stream RTCP-XR Voice Metric Statistics		Yes
133	leg1-Gmin	uint32	For the source leg, the gap threshold used for the report block to determine if a gap exists. The recommended value is 16, which corresponds to a burst period having a minimum density of 6.25% of lost or discarded packets.	Audio Stream RTCP-XR Voice Metric Statistics		Yes
134	leg1-jb-adaptive	uint32	For the source leg, the size of the jitter buffer as it dynamically adjusts in response to varying levels of jitter.	Audio Stream RTCP-XR Voice Metric Statistics		Yes
135	leg1-jb-rate	uint32	For the source leg, the implementation-specific adjustment rate of the jitter buffer in adaptive mode.	Audio Stream RTCP-XR Voice Metric Statistics		Yes
136	leg1-RFactor	uint32	For the source leg, the voice quality metric describing the segment of the call that is carried over this RTP session. Valid range is 0 to 100 for narrow-band codecs and 0 to 129 for wide-band codecs. A value of 94 corresponds to "toll quality" and values of 50 or less are regarded as unusable. A value of 127 indicates this metric is unavailable.	Audio Stream RTCP-XR Voice Metric Statistics		Yes
137	leg1-MCQ	uint32	For the source leg, the estimated mean opinion score for conversational quality (MOS-CQ) including the effects of delay and other effects that would affect conversational quality. A value of 127 indicates that this metric is unavailable.	Audio Stream RTCP-XR Voice Metric Statistics		Yes
138	leg1-jb-nominal	uint32	For the source leg, the current nominal jitter buffer delay for packets that arrive exactly on time, in millisecond precision.	Audio Stream RTCP-XR Voice Metric Statistics		Yes
139	leg1-jb-max-delay	uint32	For the source leg, the current maximum jitter buffer delay corresponding to the earliest arriving packet that would not be discarded, in millisecond precision.	Audio Stream RTCP-XR Voice Metric Statistics		Yes
140	leg1-jb-abs-max-delay	uint32	For the source leg, the absolute maximum delay that the adaptive jitter buffer can reach under worst case conditions, in millisecond precision.	Audio Stream RTCP-XR Voice Metric Statistics		Yes
141	leg2-loss-rate	uint32	For the destination leg, the fraction of RTP data packets from the endpoint lost since the beginning of reception, expressed as a fixed point number with the binary point at the left edge of the field.	Audio Stream RTCP-XR Voice Metric Statistics		Yes
142	leg2-discard-rate	uint32	For the destination leg, the fraction of RTP data packets from the endpoint that have been discarded since the beginning of reception, due to late or early arrival, under-run or overflow at the receiving jitter buffer.	Audio Stream RTCP-XR Voice Metric Statistics		Yes
143	leg2-burst-density	uint32	For the destination leg, the fraction of RTP data packets within burst periods since the beginning of reception that were either lost or discarded. This field will be populated and will be set to zero if no packets have been received.	Audio Stream RTCP-XR Voice Metric Statistics		Yes
144	leg2-gap-density	uint32	For the destination leg, the fraction of RTP data packets within inter-burst gaps since the beginning of reception that were either lost or discarded. This field will be populated and will be set to zero if no packets have been received.	Audio Stream RTCP-XR Voice Metric Statistics		Yes
145	leg2-burst-duration	uint32	For the destination leg, the mean duration of the burst periods that have occurred since the beginning of reception, in millisecond precision.	Audio Stream RTCP-XR Voice Metric Statistics		Yes
146	leg2-gap-duration	uint32	For the destination leg, the mean duration of the gap periods that have occurred since the beginning of reception, in millisecond precision.	Audio Stream RTCP-XR Voice Metric Statistics		Yes
147	leg2-round-trip-delay	uint32	For the destination leg, the most recently calculated round trip time between RTP interfaces, in millisecond precision.	Audio Stream RTCP-XR Voice Metric Statistics		Yes
148	leg2-ES-delay	uint32	For the destination leg, the most recently estimated end system delay, in millisecond precision.	Audio Stream RTCP-XR Voice Metric Statistics		Yes
149	leg2-Gmin	uint32	For the destination leg, the gap threshold used for the report block to determine if a gap exists. The recommended value is 16, which corresponds to a burst period having a minimum density of 6.25% of lost or discarded packets.	Audio Stream RTCP-XR Voice Metric Statistics		Yes
150	leg2-jb-adaptive	uint32	For the destination leg, the size of the jitter buffer as it dynamically adjusts in response to varying levels of jitter.	Audio Stream RTCP-XR Voice Metric Statistics		Yes
151	leg2-jb-rate	uint32	For the destination leg, the implementation specific adjustment rate of the jitter buffer in adaptive mode.	Audio Stream RTCP-XR Voice Metric Statistics		Yes
152	leg2-RFactor	uint32	For the destination leg, the voice quality metric describing the segment of the call that is carried over this RTP session. Valid range is 0 to 100 for narrow-band codecs and 0 to 129 for wide-band codecs. A value of 94 corresponds to "toll quality" and values of 50 or less are regarded as unusable. A value of 127 indicates this metric is unavailable.	Audio Stream RTCP-XR Voice Metric Statistics		Yes
153	leg2-MCQ	uint32	For the destination leg, the estimated mean opinion score for conversational quality (MOS-CQ) including the effects of delay and other effects that would affect conversational quality. A value of 127 indicates that this metric is unavailable.	Audio Stream RTCP-XR Voice Metric Statistics		Yes
154	leg2-jb-nominal	uint32	For the destination leg, the current nominal jitter buffer delay for packets that arrive exactly on time, in millisecond precision.	Audio Stream RTCP-XR Voice Metric Statistics		Yes
155	leg2-jb-max-delay	uint32	For the destination leg, the current maximum jitter buffer delay corresponding to the earliest arriving packet that would not be discarded, in millisecond precision.	Audio Stream RTCP-XR Voice Metric Statistics		Yes
156	leg2-jb-abs-max- delay	uint32	For the destination leg, the absolute maximum delay that the adaptive jitter buffer can reach under worst case conditions, in millisecond precision.	Audio Stream RTCP-XR Voice Metric Statistics		Yes
157	reserved for future use		Not used in Q-SBC CDRs.	Currently blank.
158	reserved for future use		Not used in Q-SBC CDRs.	Currently blank.
159	src-cipher-suite	string, max 50 chars	Name of cipher-suite accepted on ingress leg. If more than one m-line contains a cipher-suite, additional cipher-suites will be added as comma-separated values. The cipher-suite that was in use the time of CDR generation is sent.	Media Stream Data (SRTP info)		Yes
160	dest-cipher-suite	string, max 50 chars	Name of cipher-suite accepted on egress leg. If more than one m-line contains a cipher-suite, additional cipher-suites are added as comma-separated values. The cipher-suite that was in use the time of CDR generation is sent.	Media Stream Data (SRTP info)		Yes
161	src-packet-outside-replay-window	uint32	Number of packets received that are outside replay window at origination (ingress) leg.	Media Stream SRTP Statistics		Yes
162	src-packet-auth-failure	uint32	Number of packets received that failed authentication check at origination (ingress) leg.	Media Stream SRTP Statistics		Yes
163	src-packet-cipher-failure	uint32	Number of packets received that experienced cipher failure at origination (ingress) leg.	Currently blank.
164	dest-packet-outside-replay-window	uint32	Number of packets received that are outside replay window at origination (egress) leg.	Media Stream SRTP Statistics		Yes
165	dest-packet-auth-failure	uint32	Number of packets received that failed authentication check at origination (egress) leg.	Media Stream SRTP Statistics		Yes
166	dest-packet-cipher-failure	uint32	Number of packets received that experienced cipher failure at origination (egress) leg.	Currently blank.
167-176	reserved for future use		Not used in Q-SBC CDRs.	Currently blank.
177	embedded-DSP-insertion-reason	string, max 8 chars	Code indicates whether or not DSP (transcoder) services were used for the call and for what purpose. If the call was rejected the value indicates why. Valid values: NA: The DSP was not inserted. The call can be a successful call that did not require transcoding or a failed transcoding, transrating, or DTMF call if the DSP is not provisioned. TRC: The DSP was inserted for transcoding. TRR: The DSP was inserted for transrating (not transcoding). DTMF: The DSP was inserted for DTMF inter-working (not transcoding). RLC: The call was rejected because the codec was not included in the DSP configuration. RLD: The call was rejected for lack of DSP resources or the DSP was not operational. RLL: The call was rejected for lack of DSP licenses or the requested codec is not supported. ROR: The call was rejected for reasons not related to the DSP.	DSP insertion/rejection reason		Yes
178	outgoing-to-uri	string, max 512 chars	Contents of the To URI in the outgoing INVITE message.	Egress Protocol Variant Specific Data	Yes	Yes	Yes	Yes
179	incoming-request-uri	string, max 512 chars	Contents of the Request-URI in the incoming INVITE message.	Ingress Protocol Variant Specific Data	Yes	Yes	Yes	Yes
180	incoming-rsa-ip-address	string, max 512 chars	Signaling IP address for the incoming call in either IPv4 or IPv6 format.	Ingress Local Gateway Signaling IP Address	Yes	Yes	Yes	Yes
181	SBC-iServer-version	string, max 512 chars	Version of (Q-SBC) SBC software running.	Currently blank.
182	outgoing-request-uri	string, max 512 chars	Contents of the Request-URI in the outgoing INVITE message.	Egress Protocol Variant Specific Data	Yes	Yes	Yes	Yes
183	outgoing-from-uri	string, max 512 chars	Contents of the From URI in the outgoing INVITE message.	Egress Protocol Variant Specific Data	Yes	Yes	Yes	Yes
184	privacy-ingress-requested		Indicates whether privacy was requested for the ingress call leg.	Currently blank.
185	privacy-method-egress		Indicates whether privacy has been applied to the egress call leg and the type of privacy applied.	Currently blank.
186	privacy-egress-requested		Indicates whether privacy was requested for the egress call leg.	Currently blank.
187	src-policed-packets	string, max 16 characters	The number of packets dropped at the ingress leg by the RTP/SRTP bandwidth policing or video bandwidth policing function during media transmission. The field is populated only in ingress end (end1) CDRs. The field is blank in all other CDR types. If multiple m-lines are present in the SDP for the call, the field contains values for each m-line (comma-separated and in the order shown in the SDP).	Media Stream Stats (Ingress packetDiscarded[x])		Yes
188	dest-policed-packets	string, max 16 characters	The number of packets dropped at the egress leg by the RTP/SRTP bandwidth policing or video bandwidth function during media transmission. The field is populated only in ingress end (end1) CDRs. The field is blank in all other CDR types. If multiple m-lines are present in the SDP for the call, the field contains values for each m-line (comma-separated and in the order shown in the SDP).	Media Stream Stats (Egress packetDiscarded[x])		Yes
189	full-paid-hdr	string, max 512 chars	Contents of the full PAID header in the incoming INVITE message.	Ingress Protocol Variant Specific Data	Yes	Yes	Yes	Yes
190	Source ptime	uint32	Indicates the ptime in milliseconds used by the received RTP stream on the source leg.	Ingress RTP Packetization Time		Yes
191	Destination ptime	uint32	Indicates the ptime in milliseconds used by the received RTP stream on the destination leg.	Egress RTP Packetization Time		Yes
192	fmm-call-invoked-profiles	string	In end1 CDRs, lists the Flexible Message Manipulation (FMM) profiles invoked during processing of the initial request/response.	Currently blank.
193	outgoing-topmost-route-header	string, max 512 characters	When SIP loose routing is used for a call, this field contains the top-most Route header from the outgoing request.	Egress Protocol Variant Specific Data
194-198	Reserved for future use.		Not used in Q-SBC CDRs.	Currently blank.
199	reinvite-reject-count	uint32	Indicates the number of Re-INVITE requests rejected because configured Re-INVITE rate limits were exceeded.	Currently blank.
200	organization-hdr	string, max 128 chars	If an Organization header is present in an initial, incoming INVITE request, this field contains up to 31 characters from that header.	Currently blank.
201	sdp-media-offer-codec	string, max 64 characters	Records the final negotiated offer codec for a call. If multiple m-lines are present in the SDP for the call, the fields contain values for each m-line (comma-separated). Possible values are: PCMU PCMA CN G7231 G728 G729 G729A t38 g729wAnnexB g729AnnexAwAnnexB H261 H263 H263-1998 H263-2000 H264 g722 G726-32 G726-40 G726 G726-24 G726-16 GSM GSM-EFR GSM-HR QCELP EVRC EVRC0 VMR-WB clearmode SPEEX AMR AMR-WB G7231AR iLBC H262 EVRCB EVRCB0 MPV MP2T GSM-AMR H263 opus unknown invalid	Media Stream Data		Yes
202	sdp-media-answer-codec	string, max 64 characters	Records the final negotiated answer codec for a call. If multiple m-lines are present in the SDP for the call, the fields contain values for each m-line (comma-separated). Possible values are the same as for field 201.	Media Stream Data		Yes
203	video-cac	string, max 32 characters	Populated if video CAC limits have been applied.	Video Cac When applicable, field is populated with "video-cac-applied."		Yes
204	vmg-name	string, max 64 characters	Indicates the name of the VMG used to process the call.	Currently blank.
205	msrp-data-volume-rx-src	uint32	Number of bytes received by the source leg during the active session. This is the number of bytes received, before any topology hiding is applied by the SBC, from the source.	Media Stream Stats ([STO:231], [sf: 7] ingress octetReceived1)		Yes
206	msrp-data-volume-rx-dst	uint32	Number of bytes received by the destination leg during the active session. This is the number of bytes received, before any topology hiding is applied by the SBC, from the destination.	Media Stream Stats ([STO:231], [sf: 13] egress octetReceived1)		Yes
207	msrp-im-rx-src	uint32	Number of IM messages received from the originator of the session during the active session.	Currently blank.
208	msrp-im-rx-dst	uint32	Number of IM messages received from the session destination during the active session.	Currently blank.
209	msrp-file-size	uint32	For MSRP sessions, size of the file transferred using MSRP.	Currently blank.
210	siprec-profile	string	SIP recording profile used for the recording session.	Currently blank.
211	siprec-associated-callids	string	The list of recording session Call IDs if a session is recorded.	Currently blank.
212	rs-setup-error	uint32	Error code if the SBC is unable to establish a recording session with a SIP recording server when a session meets recording criteria.	Currently blank.
213	siprec-calluuid	string	The UUID value from the X-Genesys-Call-UUID header	Currently blank.

Space shortcuts

Page tree