Use the Partition ID Net ID In Network ID IAM window to configure network data sent in IAM messages.

To View and Edit Partition ID Net ID In Network ID IAM

On the SBC main screen, go to Configuration > Profile Management > Category: Signaling Profiles > Signaling Profile > Egress > Partition ID Net ID In Network ID IAM or
All > Profiles > Signaling > Signaling Profile > Egress > Partition ID Net ID In Network ID IAM

Select the Signaling Profile you want to configure from the drop-down list. The Partition ID Net ID In Network ID IAM window is displayed.

Signaling Profile - Egress - Partition ID Net ID In Network ID IAM

Use the following table to configure the options and then click Save.

Signaling Profile - Egress - Partition Id Net Id In Network Id IAM parameters

Parameter Description
Generate Partition ID Net ID In Network ID IAMWhen selected, the Partition ID and Network ID specified on the ingress trunk group screen is used to populate the Network Data parameter in the IAM sent from the egress trunk group.
Propagate Partition ID Net ID In Network ID IAMWhen selected, the Partition ID and Network ID received in the ingress IAM by the SBC are used to populate the Network Data parameter in the IAM sent fromthe egress trunk group.

  • No labels