Table of Contents
SBC Core Billing Guide
- Billing Introduction
- CAM Changes in This Release
- CDR Examples
- CDR Field Descriptions
- Vendor Specific Attributes Reference
- Rf Interface Support
- Rx Interface Support
DSP Channel Densities for SBC 5000 and 7000 Series
- Managing DSPs
- SBC 5100 and 5200 DSP Densities
- SBC 5x10 DSP Densities
- SBC 5400 DSP Densities
- SBC 7000 DSP Densities
- V.8 Signal Analysis Support
How to Change SBC 5000 or 7000 Mgmt IP Address After Installation
Routine Maintenance Guide
Resource Monitoring and Statistics
Pushing Audit Records to Remote Server Using rsyslog.conf File
Service-Impacting Configuration Attributes
Setting Up Logical Connection between High Availability Nodes
Supported Log Types
Establishing Password-less Connection between the SBC and the Remote Server
SbcSftp - Secure File Transfers with Automated ACL Creation and Deletion
This section provides information on administering the SBC Core.
Ribbon Communications is rebranding its software and customer documentation on a per-product release basis after the recent merger of Sonus Networks, Inc. and GENBAND (GB). Separate GB / Sonus branding could be present in the documents until the rebranding is completed.
Warning
The SBC Core system is a closed network device. Customer modifications at the Linux level are not allowed or supported. These modifications can cause stability, update and fail-over issues.
Customers should only configure the SBC using the supported interfaces (CLI, REST, EMA, EMS).
Overview
Content Tools