<!-- style macro -->
<!-- style macro -->
To access a Time of Day Table:
- In the WebUI, click the Settings tab.
In the left navigation pane, go to Call routing > Time of Day Table and click the desired Table entry.
Modifying an Entry to a Time of Day Table
- Click the expand (
) Icon next to the entry you wish to modify. - Edit the entry properties as required, see details below.
Enabling an Entry in a Time of Day Table
- Select the check box next to the entry you wish to enable.
- Click the Enable (
) icon at the top of the table.
Disabling an Entry in a Time of Day Table
- Select the check box next to the entry you wish to disable.
- Click the Disable icon (
) at the top of the table.
Deleting an Entry in a Time of Day Table
- Select the check box next to the entry you wish to delete.
- Click the Delete icon (
) at the top of the table.
Creating an Entry to a Time of Day Table
- In the WebUI, click the Settings tab.
- In the left navigation pane, go to Call Routing > Time of Day Table and select the desired table.
Click the Create Time of Day Entry (
) icon.
- Configure the fields. See Time of Day Entry - Field Definitions.
Click OK.
Time of Day Entry - Field Definitions
- If the Start Time and Stop Time are the same, or if the Start Time and Stop Time are both empty, the Time of Day entry applies all day.
- If the Start Time is greater than the Stop Time, the Time of Day entry applies from the Start Time until the Stop Time on the next day.
- A blank entry specifies all days or hours.
Description
A description of the Time of Day entry.
Admin State
Enables a user to disable a single entry in the Time of Day table; an entry is applied only if the entry is enabled.
Start Time
Specifies the Stop time for Time of Day according to local time. Valid entry: HH (hour):MM (minutes) in a 24 hour period.
A default time range is not set for the Start and Stop times; you must configure the desired times.
Stop Time
Specifies the Start time for Time of Day according to local time. Valid entry: HH (hour):MM (minutes) in a 24 hour period.
A default time range is not set for the Start and Stop times; you must configure the desired times.
Days of Week
Specifies the Day of the Week that is individually selected for Time of Day. Valid entry: Sunday, Monday, Tuesday, Wednesday, Thursday, Friday, or Saturday.