This section helps you to understand the prescribed behavior associated with various 3GPP P-Headers.
To View and Edit P-Header Extensions
On SBC main screen, go to Configuration > System Provisioning > Category: SIP Carrier Peering > Signaling > P-Header Extensions. The P-Header Extensions window is displayed.
The P-Header Extensions can be checked for each Address Context, for each Zone, for each Sip Trunk Group created or for all the Address Contexts, Zones and Sip Trunk Groups created. Use the drop-down box to select the desired Address Context, Zone and Sip Trunk Group.
The Edit P-Header Extensions window is displayed.
SIP Carrier Peering - Signaling - P-Header Extensions
The following fields are displayed:
P-Header Extension parameters
Parameter | Description |
|---|---|
| Enable to honor P-Orig-CA header received on the ingress side.
|
| Enable to send P-Orig-CA header on the egress side.
|
| Use this parameter to set the P-Visited-Network-ID header value when receiving REGISTER, OOD INVITE and OOD non-INVITE requests from UE before the message is forwarded towards IMS core network (for example, visitedNetwork or “\”Visited Network\””). The value ranges up to 255 characters. |
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.
Overview
Content Tools