IMPORTANT
The Transparency Profile is the recommended method of configuring transparency on the SBC Core for new deployments as well as when applying additional transparency configurations to existing deployments. Do not use IP Signaling Profile flags in these scenarios because the flags will be retired in upcoming releases.
Refer to the SBC SIP Transparency Implementation Guide for additional information.
This section helps you to understand the SDP Transparency control to set the sdpTransparencyState flag to transparently pass SDP information.
To View and Edit SDP Transparency
On SBC main screen, go to Configuration > System Provisioning > Category: SIP Carrier Peering > Signaling > Sdp Transparency. The Sdp Transparency window is displayed.
The Sdp Transparency can be checked for each Address Context, for each Zone, for each Sip Trunk Group created or for all the Address Contexts, Zones and Sip Trunk Groups created. Use the drop-down box to select the desired Address Context, Zone and Sip Trunk Group.
The Edit Sdp Transparency window is displayed.
SIP Carrier Peering - Signaling - Sdp Transparency
The following fields are displayed:
Sdp Transparency Paramters
Parameter | Description |
|---|---|
| Enabling this flag on both legs will transparently pass SDP information.
|
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.
Overview
Content Tools