You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Introduction

Use the following parameters to configure a distinctive ring for analog calls. 


Parameters

ParameterDescription
ID(READ ONLY)
Caller-Pattern-Match

Uses the ring pattern if the caller’s phone number matches the pattern.

Caller-Pattern-Match formatting:

SymbolDescription
.Matches one or more digits.
[x-y]Matches any single digit between x and y. For example, [1-3] matches 1, 2, or 3.
X

Matches any digit between 0 and 9, equivalent to [0-9].

Z

Matches any digit between 1 and 9, equivalent to [1-9].

NMatches any digit between 2 and 9, equivalent to [2-9].
Called-Pattern-Match

Uses the ring pattern if the called phone number matches the pattern.

Called-Pattern-Match formatting:

SymbolDescription
.Matches one or more digits.
[x-y]Matches any single digit between x and y. For example, [1-3] matches 1, 2, or 3.
X

Matches any digit between 0 and 9, equivalent to [0-9].

Z

Matches any digit between 1 and 9, equivalent to [1-9].

NMatches any digit between 2 and 9, equivalent to [2-9].
Ring-Type

Choose a ring type from the Ring Type drop-down list:

  • Ring-2secOn4secOff (default)
  • Ring-1secOn4secOff
  • Ring-0.4secOn0.8secOff
  • Ring-2secOn0.8secOff
  • Ring-04.secOn0.4secOff
  • Ring-2secOn4.8secOff
  • Ring-4secOn4secOff
  • Disabled
  • No labels