Use the procedures in this section to upgrade the DSC 8000 software. Software is upgraded in the following order:
- CPUs
- MCH Ethernet Switches
- IO cards
Prerequisites
Workflow
U the CPUs
Start
Log onto the DSC 8000 Management CPU in slot 13 (p19p2.5, Control shelf) or slot 2 (p19p1.3).
Run command "upgrade" and press Enter.
Caution
The Operating System on the IO boards in the DSC 8000 may need to be upgraded before CPUs can be upgraded to Release 24.0.0. If the OS upgrade is required on the IO boards, the user will need to confirm the update of each IO board. The OS will be upgraded on the IO board and the card will be rebooted. This will cause all links associated to the affected IO board to go down until the card has rebooted and its software is running.
:::::::::::::::::::::::::::::::: Ribbon DSC ::::::::::::::::::::::::::::::::
┌───────────────────┐
│DSC8000 CPU Upgrade│
└───────────────────┘
_____________________________________________
Type "q" to quit from most prompts or CTRL-C.
This process will prepare each CPU for upgrade before rebooting each CPU in order, isolating the reboots to avoid outages.
Getting software versions...Done
--------------------------------Check IO OS---------------------------------
Checking IOs for old OS that may need to be updated to communicate with the CPUs in the new load
IO Information
If an IO just got updated it may show up as 'Unable to get info' temporarily
This is normal and will show proper info once the software is running
==============
Slot: 8 OS: rel_12_00_p04.x511.img Needs OS Upgrade: Yes
Slot: 11 OS: rel_12_00_p04.x511.img Needs OS Upgrade: Yes
Slot: 21 OS: rel_12_00_p04.x511.img Needs OS Upgrade: Yes
Detected IO(s) that need a new OS.
Select IO to update the OS (0 to exit) [8, 11, 21]:
When the Check IO OS process is shown, enter the IO cards that need to be updated and then press Enter.
--------------------------------Check IO OS---------------------------------
Checking IOs for old OS that may need to be updated to communicate with the CPUs in the new load
IO Information
If an IO just got updated it may show up as 'Unable to get info' temporarily
This is normal and will show proper info once the software is running
==============
Slot: 8 OS: rel_12_00_p04.x511.img Needs OS Upgrade: Yes
Slot: 11 OS: rel_12_00_p04.x511.img Needs OS Upgrade: Yes
Slot: 21 OS: rel_12_00_p04.x511.img Needs OS Upgrade: Yes
Detected IO(s) that need a new OS.
Select IO to update the OS (0 to exit) [8, 11, 21]: 8
Software Update for IO Card in Slot #8
Pushing image to the IO card in slot #8
Executing verify_io_image.sh script on IO board in slot #8
DO NOT INTERRUPT!! THIS MAY TAKE A FEW MINUTES...
Done: flashed Nexus image to IO board kernel0 and kernel1
Rebooting IO card in slot #8.
Repeat step 3 for the remaining IO Cards. After all IO Cards are updated.
IO Information
If an IO just got updated it may show up as 'Unable to get info' temporarily
This is normal and will show proper info once the software is running
==============
Slot: 8 OS: rel_12_23_p01.x511.img Needs OS Upgrade: No
Slot: 11 OS: rel_12_23_p01.x511.img Needs OS Upgrade: No
Slot: 21 OS: rel_12_23_p01.x511.img Needs OS Upgrade: No
All IOs are at the proper OS. An upgrade to the new build will need to be done after the CPU upgrade as usual
Type "yes", and press Enter to run the pre-upgrade check.
-----------------------------Pre Upgrade Check------------------------------
Please run a pre-upgrade check. Type "yes" to execute this check (exiting otherwise): yes
Calling pre-upgrade check...
======== Performing upgrade PRE-checks... =========---------------------------------------------------
USB device check...
---------------------------------------------------
Check USB device status on all the CPU or VM slots reported by cardlist/slotmon
SLOT: 2
SLOT: 13
SLOT: 3
SLOT: 5
SLOT: 6
SLOT: 9
SLOT: 10
SLOT: 12
SLOT: 17
SLOT: 18
SLOT: 19
SLOT: 23
PASSED
<Enter> to continue
Press Enter.
---------------------------------------------------
Ping connectivity check...
---------------------------------------------------
Ping all slots which are CPUS or IOs in /opt/cpu_ss7gw/current/data/slot.conf to check card availability
Ping all the slots reported by cardlist/slotmon to check packet loss
-Slot: 2 Packets dropped: 0%
-Slot: 13 Packets dropped: 0%
-Slot: 3 Packets dropped: 0%
-Slot: 12 Packets dropped: 0%
-Slot: 17 Packets dropped: 0%
-Slot: 26 Packets dropped: 0%
-Slot: 31 Packets dropped: 0%
-Slot: 40 Packets dropped: 0%
-Slot: 45 Packets dropped: 0%
-Slot: 54 Packets dropped: 0%
-Slot: 18 Packets dropped: 0%
-Slot: 19 Packets dropped: 0%
-Slot: 21 Packets dropped: 0%
-Slot: 22 Packets dropped: 0%
-Slot: 23 Packets dropped: 0%
-Slot: 24 Packets dropped: 0%
-Slot: 25 Packets dropped: 0%
PASSED
<Enter> to continue
Press Enter:
---------------------------------------------------
ish connectivity check...
---------------------------------------------------
Perform ish test between all CPUS in /opt/cpu_ss7gw/current/data/slot.conf to check slots interactive communication availability
ish test from slot 2 to all slots in system...
ish test from slot 2 to slot 2 passed.
ish test from slot 2 to slot 3 passed.
ish test from slot 2 to slot 12 passed.
ish test from slot 2 to slot 13 passed.
ish test from slot 2 to slot 17 passed.
ish test from slot 2 to slot 26 passed.
ish test from slot 2 to slot 31 passed.
ish test from slot 2 to slot 40 passed.
ish test from slot 2 to slot 45 passed.
ish test from slot 2 to slot 54 passed.
ish test from slot 3 to all slots in system...
ish test from slot 3 to slot 2 passed.
ish test from slot 3 to slot 3 passed.
ish test from slot 3 to slot 12 passed.
ish test from slot 3 to slot 13 passed.
ish test from slot 3 to slot 17 passed.
ish test from slot 3 to slot 26 passed.
ish test from slot 3 to slot 31 passed.
ish test from slot 3 to slot 40 passed.
ish test from slot 3 to slot 45 passed.
ish test from slot 3 to slot 54 passed.
ish test from slot 12 to all slots in system...
ish test from slot 12 to slot 2 passed.
ish test from slot 12 to slot 3 passed.
ish test from slot 12 to slot 12 passed.
ish test from slot 12 to slot 13 passed.
ish test from slot 12 to slot 17 passed.
ish test from slot 12 to slot 26 passed.
ish test from slot 12 to slot 31 passed.
ish test from slot 12 to slot 40 passed.
ish test from slot 12 to slot 45 passed.
ish test from slot 12 to slot 54 passed.
ish test from slot 13 to all slots in system...
ish test from slot 13 to slot 2 passed.
ish test from slot 13 to slot 3 passed.
ish test from slot 13 to slot 12 passed.
ish test from slot 13 to slot 13 passed.
ish test from slot 13 to slot 17 passed.
ish test from slot 13 to slot 26 passed.
ish test from slot 13 to slot 31 passed.
ish test from slot 13 to slot 40 passed.
ish test from slot 13 to slot 45 passed.
ish test from slot 13 to slot 54 passed.
ish test from slot 17 to all slots in system...
ish test from slot 17 to slot 2 passed.
ish test from slot 17 to slot 3 passed.
ish test from slot 17 to slot 12 passed.
ish test from slot 17 to slot 13 passed.
ish test from slot 17 to slot 17 passed.
ish test from slot 17 to slot 26 passed.
ish test from slot 17 to slot 31 passed.
ish test from slot 17 to slot 40 passed.
ish test from slot 17 to slot 45 passed.
ish test from slot 17 to slot 54 passed.
ish test from slot 26 to all slots in system...
ish test from slot 26 to slot 2 passed.
ish test from slot 26 to slot 3 passed.
ish test from slot 26 to slot 12 passed.
ish test from slot 26 to slot 13 passed.
ish test from slot 26 to slot 17 passed.
ish test from slot 26 to slot 26 passed.
ish test from slot 26 to slot 31 passed.
ish test from slot 26 to slot 40 passed.
ish test from slot 26 to slot 45 passed.
ish test from slot 26 to slot 54 passed.
ish test from slot 31 to all slots in system...
ish test from slot 31 to slot 2 passed.
ish test from slot 31 to slot 3 passed.
ish test from slot 31 to slot 12 passed.
ish test from slot 31 to slot 13 passed.
ish test from slot 31 to slot 17 passed.
ish test from slot 31 to slot 26 passed.
ish test from slot 31 to slot 31 passed.
ish test from slot 31 to slot 40 passed.
ish test from slot 31 to slot 45 passed.
ish test from slot 31 to slot 54 passed.
ish test from slot 40 to all slots in system...
ish test from slot 40 to slot 2 passed.
ish test from slot 40 to slot 3 passed.
ish test from slot 40 to slot 12 passed.
ish test from slot 40 to slot 13 passed.
ish test from slot 40 to slot 17 passed.
ish test from slot 40 to slot 26 passed.
ish test from slot 40 to slot 31 passed.
ish test from slot 40 to slot 40 passed.
ish test from slot 40 to slot 45 passed.
ish test from slot 40 to slot 54 passed.
ish test from slot 45 to all slots in system...
ish test from slot 45 to slot 2 passed.
ish test from slot 45 to slot 3 passed.
ish test from slot 45 to slot 12 passed.
ish test from slot 45 to slot 13 passed.
ish test from slot 45 to slot 17 passed.
ish test from slot 45 to slot 26 passed.
ish test from slot 45 to slot 31 passed.
ish test from slot 45 to slot 40 passed.
ish test from slot 45 to slot 45 passed.
ish test from slot 45 to slot 54 passed.
ish test from slot 54 to all slots in system...
ish test from slot 54 to slot 2 passed.
ish test from slot 54 to slot 3 passed.
ish test from slot 54 to slot 12 passed.
ish test from slot 54 to slot 13 passed.
ish test from slot 54 to slot 17 passed.
ish test from slot 54 to slot 26 passed.
ish test from slot 54 to slot 31 passed.
ish test from slot 54 to slot 40 passed.
ish test from slot 54 to slot 45 passed.
ish test from slot 54 to slot 54 passed.
PASSED
<Enter> to continue
One of the following messages will be displayed on the system depending on if SDA is deployed.
For a system doesn't deploy
---------------------------------------------------
Checking SDA configuration
---------------------------------------------------
flex_slot.conf file doesn't exist ... This is expected if SDA is not configured on the system.
---------------------------------------------------
Checking SDA configuration
---------------------------------------------------
Found DRBD 9.0 configuration on your system.
PASSED
Press .
---------------------------------------------------
RPM database check...
---------------------------------------------------
Check RPM database status on all the CPU or VM slots reported by cardlist/slotmon
SLOT: 2
RPM database files backed up to /var/lib/rpm/backup-20230518
RPM database is not corrupt.
Verifying RPM database.
Cleaning up
RPM database is valid.
SLOT: 13
RPM database files backed up to /var/lib/rpm/backup-20230518
RPM database is not corrupt.
Verifying RPM database.
Cleaning up
RPM database is valid.
SLOT: 3
RPM database files backed up to /var/lib/rpm/backup-20230518
RPM database is not corrupt.
Verifying RPM database.
Cleaning up
RPM database is valid.
SLOT: 12
RPM database files backed up to /var/lib/rpm/backup-20230518
RPM database is not corrupt.
Verifying RPM database.
Cleaning up
RPM database is valid.
SLOT: 17
RPM database files backed up to /var/lib/rpm/backup-20230518
RPM database is not corrupt.
Verifying RPM database.
Cleaning up
RPM database is valid.
SLOT: 26
RPM database files backed up to /var/lib/rpm/backup-20230518
RPM database is not corrupt.
Verifying RPM database.
Cleaning up
RPM database is valid.
SLOT: 31
RPM database files backed up to /var/lib/rpm/backup-20230518
RPM database is not corrupt.
Verifying RPM database.
Cleaning up
RPM database is valid.
SLOT: 40
RPM database files backed up to /var/lib/rpm/backup-20230518
RPM database is not corrupt.
Verifying RPM database.
Cleaning up
RPM database is valid.
SLOT: 45
RPM database files backed up to /var/lib/rpm/backup-20230518
RPM database is not corrupt.
Verifying RPM database.
Cleaning up
RPM database is valid.
SLOT: 54
RPM database files backed up to /var/lib/rpm/backup-20230518
RPM database is not corrupt.
Verifying RPM database.
Cleaning up
RPM database is valid.
PASSED
<Enter> to continue
Press Enter.
---------------------------------------------------
Free space check...
---------------------------------------------------
-Available RAM space: 10604 MB
-Available HDD (/var/log) space: 196165 MB
-Available Compact Flash (/opt directory) space: 24689 MB
PASSED
<Enter> to continue
Press Enter.
Checking current Clock Settings...
---------------------------------------------------
Current Clock Settings...
---------------------------------------------------
TIMEZONE:
CPU Slot 2: -04 (EDT)
CPU Slot 13: -04 (EDT)
CPU Slot 3: -04 (EDT)
CPU Slot 12: -04 (EDT)
CPU Slot 17: -04 (EDT)
CPU Slot 26: -04 (EDT)
CPU Slot 31: -04 (EDT)
CPU Slot 40: -04 (EDT)
CPU Slot 45: -04 (EDT)
CPU Slot 54: -04 (EDT)
IO Slot 18: -04 (EDT)
IO Slot 19: -04 (EDT)
IO Slot 21: -04 (EDT)
IO Slot 22: -04 (EDT)
IO Slot 23: -04 (EDT)
IO Slot 24: -04 (EDT)
IO Slot 25: -04 (EDT)
HWCLOCK:
CPU Slot 2: Thu 18 May 2023 02:55:49 AM EDT -0.126815 seconds
CPU Slot 13: Thu 18 May 2023 02:54:36 AM EDT -0.954836 seconds
CPU Slot 3: Thu 18 May 2023 02:56:59 AM EDT -0.173763 seconds
CPU Slot 12: Thu 18 May 2023 02:52:41 AM EDT -0.861351 seconds
CPU Slot 17: Thu 18 May 2023 02:55:21 AM EDT -0.876886 seconds
CPU Slot 26: Thu 18 May 2023 02:59:23 AM EDT -0.642437 seconds
CPU Slot 31: Thu 18 May 2023 03:05:59 AM EDT -0.173841 seconds
CPU Slot 40: Thu 18 May 2023 03:02:36 AM EDT -0.923690 seconds
CPU Slot 45: Thu 18 May 2023 02:40:55 AM EDT -0.783016 seconds
CPU Slot 54: Thu 18 May 2023 02:50:25 AM EDT -0.908070 seconds
IO Slot 18:
IO Slot 19:
IO Slot 21:
IO Slot 22:
IO Slot 23:
IO Slot 24:
IO Slot 25:
WALL CLOCK:
CPU Slot 2: Thu May 18 02:56:11 EDT 2023
CPU Slot 13: Thu May 18 02:56:11 EDT 2023
CPU Slot 3: Thu May 18 02:56:11 EDT 2023
CPU Slot 12: Thu May 18 02:56:12 EDT 2023
CPU Slot 17: Thu May 18 02:56:12 EDT 2023
CPU Slot 26: Thu May 18 02:56:12 EDT 2023
CPU Slot 31: Thu May 18 02:56:12 EDT 2023
CPU Slot 40: Thu May 18 02:56:13 EDT 2023
CPU Slot 45: Thu May 18 02:56:13 EDT 2023
CPU Slot 54: Thu May 18 02:56:13 EDT 2023
IO Slot 18: Thu May 18 02:56:14 EDT 2023
IO Slot 19: Thu May 18 02:56:14 EDT 2023
IO Slot 21: Thu May 18 02:56:15 EDT 2023
IO Slot 22: Thu May 18 02:56:15 EDT 2023
IO Slot 23: Thu May 18 02:56:16 EDT 2023
IO Slot 24: Thu May 18 02:56:16 EDT 2023
IO Slot 25: Thu May 18 02:56:17 EDT 2023
<Enter> to continue
Press Enter.
----------------------------------------------------------------
Checking if firmware flashing is recommended...
----------------------------------------------------------------
-CPU Slot: 2 Firmware up to date. Board Type: AMC124 Current Firmware version: 1.24
-CPU Slot: 13 Firmware up to date. Board Type: AMC124 Current Firmware version: 1.24
-CPU Slot: 3 Firmware up to date. Board Type: AMC124 Current Firmware version: 1.24
-CPU Slot: 12 Firmware up to date. Board Type: AMC124 Current Firmware version: 1.24
-CPU Slot: 17 Firmware up to date. Board Type: AMC124 Current Firmware version: 1.24
-CPU Slot: 26 Firmware up to date. Board Type: AMC124 Current Firmware version: 1.24
-CPU Slot: 31 Firmware upgrade to 1.24 or greater recommended. Board Type: AMC124 Current Firmware version: 1.22
-CPU Slot: 40 Firmware upgrade to 1.24 or greater recommended. Board Type: AMC124 Current Firmware version: 1.1a
-CPU Slot: 45 Firmware up to date. Board Type: AMC124 Current Firmware version: 1.24
-CPU Slot: 54 Firmware up to date. Board Type: AMC124 Current Firmware version: 1.24
-IO Slot: 18 Firmware up to date. Board Type: AMC348 Current Firmware version: 1.0B
-IO Slot: 19 Firmware up to date. Board Type: AMC348 Current Firmware version: 1.0B
-IO Slot: 21 Firmware up to date. Board Type: AMC348 Current Firmware version: 1.0B
-IO Slot: 22 Firmware up to date. Board Type: AMC348 Current Firmware version: 1.0B
-IO Slot: 23 Firmware up to date. Board Type: AMC348 Current Firmware version: 1.0B
-IO Slot: 24 Firmware up to date. Board Type: AMC348 Current Firmware version: 1.0B
-IO Slot: 25 Firmware up to date. Board Type: AMC348 Current Firmware version: 1.0B
-MCH Slot: 1 Firmware up to date. Board Type: AMC671 Current Firmware version: 1.26
-MCH Slot: 14 Firmware up to date. Board Type: AMC671 Current Firmware version: 1.27
-MCH Slot: 15 Firmware up to date. Board Type: AMC671 Current Firmware version: 1.26
-MCH Slot: 28 Firmware up to date. Board Type: AMC671 Current Firmware version: 1.26
-MCH Slot: 29 Firmware upgrade to 1.26 or greater recommended. Board Type: AMC671 Current Firmware version: 1.22
-MCH Slot: 42 Firmware upgrade to 1.26 or greater recommended. Board Type: AMC671 Current Firmware version: 1.22
-MCH Slot: 43 Firmware up to date. Board Type: AMC671 Current Firmware version: 1.26
-MCH Slot: 56 Firmware up to date. Board Type: AMC671 Current Firmware version: 1.26
-Chassis 1/cu1: Firmware up to date. Board Type: Cooling Unit Current Firmware version: 1.10
-Chassis 1/cu2: Firmware up to date. Board Type: Cooling Unit Current Firmware version: 1.10
-Chassis 2/cu1: Firmware up to date. Board Type: Cooling Unit Current Firmware version: 1.10
-Chassis 2/cu2: Firmware up to date. Board Type: Cooling Unit Current Firmware version: 1.10
-Chassis 3/cu1: Cannot get firmware version from Cooling Unit. Check that component is inserted.
-Chassis 3/cu2: Cannot get firmware version from Cooling Unit. Check that component is inserted.
-Chassis 4/cu1: Firmware up to date. Board Type: Cooling Unit Current Firmware version: 1.10
-Chassis 4/cu2: Firmware up to date. Board Type: Cooling Unit Current Firmware version: 1.10
-Chassis 1/pm1: Firmware upgrade to 1.26 or greater recommended. Board Type: Power Module Current Firmware version: 1.24
-Chassis 1/pm2: Firmware upgrade to 1.26 or greater recommended. Board Type: Power Module Current Firmware version: 1.24
-Chassis 1/pm4: Firmware upgrade to 1.26 or greater recommended. Board Type: Power Module Current Firmware version: 1.24
-Chassis 2/pm1: Firmware upgrade to 1.26 or greater recommended. Board Type: Power Module Current Firmware version: 1.24
-Chassis 2/pm2: Firmware upgrade to 1.26 or greater recommended. Board Type: Power Module Current Firmware version: 1.24
-Chassis 2/pm4: Firmware upgrade to 1.26 or greater recommended. Board Type: Power Module Current Firmware version: 1.24
-Chassis 3/pm1: Cannot get firmware version from Power Module. Check that component is inserted.
-Chassis 3/pm2: Cannot get firmware version from Power Module. Check that component is inserted.
-Chassis 3/pm4: Cannot get firmware version from Power Module. Check that component is inserted.
-Chassis 4/pm1: Firmware upgrade to 1.26 or greater recommended. Board Type: Power Module Current Firmware version: 1.24
-Chassis 4/pm2: Firmware upgrade to 1.26 or greater recommended. Board Type: Power Module Current Firmware version: 1.24
-Chassis 4/pm4: Firmware upgrade to 1.26 or greater recommended. Board Type: Power Module Current Firmware version: 1.24
****************************************************
*** FIRMWARE ON ONE OR MORE CARDS IS OUT OF DATE.
***
*** IT IS RECOMMENDED THAT THE FIRMWARE BE UPDATED
*** PER INSTRUCTIONS FOUND IN THE UPGRADE GUIDE
*** AFTER THE UPGRADE IS COMPLETED.
***
*** PLEASE CONTACT RIBBON CUSTOMER SUPPORT
*** FOR MORE INFORMATION.
***************************************************
WARNING
<Enter> to continue
Press Enter.
----------------------------------------------------------------
Pre-setting and verifying new FS volume labels...
----------------------------------------------------------------
-CPU Slot: 2 FS volume labels set and verified
-CPU Slot: 13 FS volume labels set and verified
-CPU Slot: 3 FS volume labels set and verified
-CPU Slot: 12 FS volume labels set and verified
-CPU Slot: 17 FS volume labels set and verified
-CPU Slot: 26 FS volume labels set and verified
-CPU Slot: 31 FS volume labels set and verified
-CPU Slot: 40 FS volume labels set and verified
-CPU Slot: 45 FS volume labels set and verified
-CPU Slot: 54 FS volume labels set and verified
PASSED
<Enter> to continue
Press Enter.
----------------------------------------------------------------
Checking if CPU Unused SATA Channels are Disabled...
----------------------------------------------------------------
-CPU Slot: 2 Unused SATA Channels are Disabled. Board Type: AMC124
-CPU Slot: 13 Unused SATA Channels are Disabled. Board Type: AMC124
-CPU Slot: 3 Unused SATA Channels are Disabled. Board Type: AMC124
-CPU Slot: 12 Unused SATA Channels are Disabled. Board Type: AMC124
-CPU Slot: 17 Unused SATA Channels are Disabled. Board Type: AMC124
-CPU Slot: 26 Unused SATA Channels are Disabled. Board Type: AMC124
-CPU Slot: 31 Unused SATA Channels are Disabled. Board Type: AMC124
-CPU Slot: 40 Unused SATA Channels are Disabled. Board Type: AMC124
-CPU Slot: 45 Unused SATA Channels are Disabled. Board Type: AMC124
-CPU Slot: 54 Unused SATA Channels are Disabled. Board Type: AMC124
PASSED
<Enter> to continue
Press Enter.
---------------------------------------------------
Check Kernel and Mount Points.
---------------------------------------------------
No tests to perform.
<Enter> to continue
Press Enter.
---------------------------------------------------
Dumping slot status and watchdog processes...
---------------------------------------------------
Dumping CPU status info...
AVAILABLE SOFTWARE VERSIONS
--------------------------------------------------------------------------------
CPU (new) dsc_8000_23_0_0_nb20230517 OS: Ribbon7.9.20
CPU (current) dsc_8000_21_0_3_nb20230118 OS: Ribbon7.9.11
(Servicepack) [none applied]
CPU (previous) Not_Available OS: Ribbon7.9.20
(Servicepack)
RUNNING SOFTWARE VERSIONS (*=update required, ?=update unknown)
CARD BUILD SERVICE O/S
-SLOT----TYPE----------RELEASE--VERSION----PACK---IMAGE-------CARD STATUS---
--------------------------------------------------------------------------------
-- Chassis 1 --
Slot 2 MGMT * 21.0.3 (nb20230118) SP: OS: Ribbon7.9.11 19 procs running
Slot 13 MGMT * 21.0.3 (nb20230118) SP: OS: Ribbon7.9.11 19 procs running
Slot 3 ROUTING * 21.0.3 (nb20230118) SP: OS: Ribbon7.9.11 25 procs running
Slot 12 ROUTING * 21.0.3 (nb20230118) SP: OS: Ribbon7.9.11 25 procs running
-- Chassis 2 --
Slot 17 ROUTING * 21.0.3 (nb20230118) SP: OS: Ribbon7.9.11 25 procs running
Slot 26 ROUTING * 21.0.3 (nb20230118) SP: OS: Ribbon7.9.11 25 procs running
-- Chassis 3 --
Slot 31 ROUTING * 21.0.3 (nb20230118) SP: OS: Ribbon7.9.11 25 procs running
Slot 40 ROUTING * 21.0.3 (nb20230118) SP: OS: Ribbon7.9.11 25 procs running
-- Chassis 4 --
Slot 45 ROUTING * 21.0.3 (nb20230118) SP: OS: Ribbon7.9.11 25 procs running
Slot 54 ROUTING * 21.0.3 (nb20230118) SP: OS: Ribbon7.9.11 25 procs running
(p=servicepack is partially applied)
Dumping IO status info...
AVAILABLE SOFTWARE VERSIONS
--------------------------------------------------------------------------------
IO (new) 358/388 /upgrade/opt/dsc_8000_23_0_0_nb20230517 OS: Not_Available
IO (new) 308A /upgrade/opt/dsc_8000_23_0_0_nb20230517 OS: Not_Available
IO (new) PCE382 /upgrade/opt/dsc_8000_23_0_0_nb20230517 OS: Not_Available
IO (current) AMC348 dsc_8000_21_0_3_nb20230118 OS: rel_12_00_p04.x511.img
(Servicepack) [none applied]
RUNNING SOFTWARE VERSIONS (*=update required, ?=update unknown)
CARD BUILD SERVICE O/S
-SLOT----TYPE----------RELEASE-VERSION------PACK-----IMAGE-------
--------------------------------------------------------------------------------
-- Chassis 1 --
-- Chassis 2 --
Slot 18 IO AMC348 21.0.3 (nb20230118) SP: OS: rel_12_00_p04.x511.img
Slot 19 IO AMC348 21.0.3 (nb20230118) SP: OS: rel_12_00_p04.x511.img
Slot 21 IO AMC348 21.0.3 (nb20230118) SP: OS: rel_12_00_p04.x511.img
Slot 22 IO AMC348 21.0.3 (nb20230118) SP: OS: rel_12_00_p04.x511.img
Slot 23 IO AMC348 21.0.3 (nb20230118) SP: OS: rel_12_00_p04.x511.img
Slot 24 IO AMC348 21.0.3 (nb20230118) SP: OS: rel_12_00_p04.x511.img
Slot 25 IO AMC348 21.0.3 (nb20230118) SP: OS: rel_12_00_p04.x511.img
-- Chassis 3 --
-- Chassis 4 --
(p=servicepack is partially applied)
Dumping MCH status info...
AVAILABLE SOFTWARE VERSIONS
--------------------------------------------------------------------------------
MCH (new) dsc_8000_23_0_0_nb20230517
MCH (current) dsc_8000_21_0_3_nb20230118
(Servicepack) [none applied]
RUNNING SOFTWARE VERSIONS (*=update required, ?=update unknown)
CARD BUILD SERVICE O/S
-SLOT----TYPE------RELEASE-VERSION----PACK-----IMAGE------------CARD STATUS-----
--------------------------------------------------------------------------------
-- Chassis 1 --
Slot 1 MCH 21.0.3 (nb20230118) SP:
Slot 14 MCH 21.0.3 (nb20230118) SP:
-- Chassis 2 --
Slot 15 MCH 21.0.3 (nb20230118) SP:
Slot 28 MCH 21.0.3 (nb20230118) SP:
-- Chassis 3 --
Slot 29 MCH 21.0.3 (nb20230118) SP:
Slot 42 MCH 21.0.3 (nb20230118) SP:
-- Chassis 4 --
Slot 43 MCH 21.0.3 (nb20230118) SP:
Slot 56 MCH 21.0.3 (nb20230118) SP:
(p=servicepack is partially applied)
Dumping Watchdog process info for each CPU...
Watchdog Process Details on MGMT - slot2_0.
WID PID STA RPT RHT HTV HTT COM
1 8006 S+ 0 0 10 10 slotmon --platform X511 -s 2 -g 0 -p /opt...
2 21266 S+ 0 0 10 10 pxbr -p /opt/cpu_ss7gw/current/data --pla...
3 21335 S+ 0 0 10 10 upp -p /opt/cpu_ss7gw/current/data/ --pla...
4 21371 S+ 0 0 10 10 sca -p /opt/cpu_ss7gw/current/data/
5 21405 S+ 0 0 10 10 sysmon.default -p /opt/cpu_ss7gw/current/...
6 21552 S+ 0 0 10 10 sysmon.cpucheck -p /opt/cpu_ss7gw/current...
7 21699 S+ 0 0 10 10 sysmon.diskmon -p /opt/cpu_ss7gw/current/...
8 21824 S+ 0 0 10 10 sysmon.logcpu -p /opt/cpu_ss7gw/current/s...
9 21995 S+ 0 0 10 10 sysmon.logmem -p /opt/cpu_ss7gw/current/s...
10 22249 S+ 0 0 10 10 sysmon.usbcheck -p /opt/cpu_ss7gw/current...
11 22337 S+ 0 0 10 10 sysmon.slotinventory -p /opt/cpu_ss7gw/cu...
12 22425 S+ 0 0 10 10 sysmon.configuremtu -p /opt/cpu_ss7gw/cur...
13 22512 S+ 0 0 10 10 sysmon.configaudit -p /opt/cpu_ss7gw/curr...
14 22541 S+ 0 0 10 10 switchmon -p /opt/cpu_ss7gw/current/data/...
15 11396 S+ 1 0 120 120 hwmon --platform X511
16 29261 S+ 0 0 10 10 licensed -r -f /opt/cpu_ss7gw/current/dat...
17 29387 S+ 0 0 10 10 snm --platform X511 -p /opt/cpu_ss7gw/cur...
18 29502 S+ 0 0 10 10 imfProbe -p 7377
19 29509 S+ 0 0 10 10 gws --platform X511 -p /opt/cpu_ss7gw/cur...
Watchdog Process Details on MGMT - slot13_0.
WID PID STA RPT RHT HTV HTT COM
1 7913 S+ 0 0 10 10 slotmon --platform X511 -s 13 -g 0 -p /op...
2 11196 S+ 0 0 10 10 pxbr -p /opt/cpu_ss7gw/current/data --pla...
3 11223 S+ 0 0 10 10 upp -p /opt/cpu_ss7gw/current/data/ --pla...
4 11260 S+ 0 0 10 10 sca -p /opt/cpu_ss7gw/current/data/
5 11324 S+ 0 0 10 10 sysmon.default -p /opt/cpu_ss7gw/current/...
6 11513 S+ 0 0 10 10 sysmon.cpucheck -p /opt/cpu_ss7gw/current...
7 11661 S+ 0 0 10 10 sysmon.diskmon -p /opt/cpu_ss7gw/current/...
8 11768 S+ 0 0 10 10 sysmon.logcpu -p /opt/cpu_ss7gw/current/s...
9 11939 S+ 0 0 10 10 sysmon.logmem -p /opt/cpu_ss7gw/current/s...
10 12210 S+ 0 0 10 10 sysmon.usbcheck -p /opt/cpu_ss7gw/current...
11 12297 S+ 0 0 10 10 sysmon.slotinventory -p /opt/cpu_ss7gw/cu...
12 12384 S+ 0 0 10 10 sysmon.configuremtu -p /opt/cpu_ss7gw/cur...
13 12507 S+ 0 0 10 10 sysmon.configaudit -p /opt/cpu_ss7gw/curr...
14 12541 S+ 0 0 10 10 switchmon -p /opt/cpu_ss7gw/current/data/...
15 12569 S+ 0 0 120 120 hwmon --platform X511
16 16631 S+ 0 0 10 10 licensed -r -f /opt/cpu_ss7gw/current/dat...
17 16647 S+ 0 0 10 10 snm --platform X511 -p /opt/cpu_ss7gw/cur...
18 16760 S+ 0 0 10 10 imfProbe -p 7377
19 16775 S+ 0 0 10 10 gws --platform X511 -p /opt/cpu_ss7gw/cur...
Watchdog Process Details on ROUTING - slot3_0.
WID PID STA RPT RHT HTV HTT COM
1 9281 S+ 0 0 10 10 sysmon.default -p /opt/cpu_ss7gw/current/...
2 9367 S+ 0 0 10 10 sysmon.cpucheck -p /opt/cpu_ss7gw/current...
3 9465 S+ 0 0 10 10 sysmon.diskmon -p /opt/cpu_ss7gw/current/...
4 9571 S+ 0 0 10 10 sysmon.logcpu -p /opt/cpu_ss7gw/current/s...
5 9742 S+ 0 0 10 10 sysmon.logmem -p /opt/cpu_ss7gw/current/s...
6 9996 S+ 0 0 10 10 sysmon.usbcheck -p /opt/cpu_ss7gw/current...
7 10084 S+ 0 0 10 10 sysmon.slotinventory -p /opt/cpu_ss7gw/cu...
8 10176 S+ 0 0 10 10 sysmon.configuremtu -p /opt/cpu_ss7gw/cur...
9 12161 S+ 0 0 10 10 licensed -r -f /opt/cpu_ss7gw/current/dat...
10 12183 S+ 0 0 10 10 dsc.1 -p /opt/cpu_ss7gw/current/data/dsc....
11 12348 S+ 0 0 10 10 dsc.2 -p /opt/cpu_ss7gw/current/data/dsc....
12 12507 S+ 0 0 10 10 dsc.3 -p /opt/cpu_ss7gw/current/data/dsc....
13 12714 S+ 0 0 10 10 dsc.4 -p /opt/cpu_ss7gw/current/data/dsc....
14 12873 S+ 0 0 10 10 dsc.5 -p /opt/cpu_ss7gw/current/data/dsc....
15 13032 S+ 0 0 10 10 dsc.6 -p /opt/cpu_ss7gw/current/data/dsc....
16 13242 S+ 0 0 10 10 dsc.7 -p /opt/cpu_ss7gw/current/data/dsc....
17 13605 S+ 0 0 10 10 dsc.8 -p /opt/cpu_ss7gw/current/data/dsc....
18 13769 S+ 0 0 10 10 dsc.9 -p /opt/cpu_ss7gw/current/data/dsc....
19 13928 S+ 0 0 10 10 dsc.10 -p /opt/cpu_ss7gw/current/data/dsc...
20 14279 S+ 0 0 10 10 iwf -p /opt/cpu_ss7gw/current/data/ --pla...
21 14471 S+ 0 0 10 10 dre --platform X511 -p /opt/cpu_ss7gw/cur...
22 14673 S+ 0 0 10 10 sccp --platform X511 -p /opt/cpu_ss7gw/cu...
23 25825 S+ 1 0 10 10 dinamo --platform X511 -p /opt/cpu_ss7gw/...
24 14930 S+ 0 0 10 10 l4cvtr --platform X511 -p /opt/cpu_ss7gw/...
25 15024 S+ 0 0 10 10 imf --platform X511 -p /opt/cpu_ss7gw/cur...
Watchdog Process Details on ROUTING - slot12_0.
WID PID STA RPT RHT HTV HTT COM
1 9270 S+ 0 0 10 10 sysmon.default -p /opt/cpu_ss7gw/current/...
2 9357 S+ 0 0 10 10 sysmon.cpucheck -p /opt/cpu_ss7gw/current...
3 9455 S+ 0 0 10 10 sysmon.diskmon -p /opt/cpu_ss7gw/current/...
4 9561 S+ 0 0 10 10 sysmon.logcpu -p /opt/cpu_ss7gw/current/s...
5 9732 S+ 0 0 10 10 sysmon.logmem -p /opt/cpu_ss7gw/current/s...
6 9986 S+ 0 0 10 10 sysmon.usbcheck -p /opt/cpu_ss7gw/current...
7 10073 S+ 0 0 10 10 sysmon.slotinventory -p /opt/cpu_ss7gw/cu...
8 10160 S+ 0 0 10 9 sysmon.configuremtu -p /opt/cpu_ss7gw/cur...
9 12153 S+ 0 0 10 10 licensed -r -f /opt/cpu_ss7gw/current/dat...
10 12175 S+ 0 0 10 10 dsc.1 -p /opt/cpu_ss7gw/current/data/dsc....
11 12340 S+ 0 0 10 10 dsc.2 -p /opt/cpu_ss7gw/current/data/dsc....
12 12499 S+ 0 0 10 10 dsc.3 -p /opt/cpu_ss7gw/current/data/dsc....
13 12706 S+ 0 0 10 10 dsc.4 -p /opt/cpu_ss7gw/current/data/dsc....
14 12865 S+ 0 0 10 10 dsc.5 -p /opt/cpu_ss7gw/current/data/dsc....
15 13024 S+ 0 0 10 10 dsc.6 -p /opt/cpu_ss7gw/current/data/dsc....
16 13225 S+ 0 0 10 10 dsc.7 -p /opt/cpu_ss7gw/current/data/dsc....
17 13597 S+ 0 0 10 10 dsc.8 -p /opt/cpu_ss7gw/current/data/dsc....
18 13756 S+ 0 0 10 10 dsc.9 -p /opt/cpu_ss7gw/current/data/dsc....
19 13920 S+ 0 0 10 10 dsc.10 -p /opt/cpu_ss7gw/current/data/dsc...
20 14255 S+ 0 0 10 10 iwf -p /opt/cpu_ss7gw/current/data/ --pla...
21 14462 S+ 0 0 10 10 dre --platform X511 -p /opt/cpu_ss7gw/cur...
22 14664 S+ 0 0 10 10 sccp --platform X511 -p /opt/cpu_ss7gw/cu...
23 31866 R+ 1 0 10 10 dinamo --platform X511 -p /opt/cpu_ss7gw/...
24 14921 S+ 0 0 10 10 l4cvtr --platform X511 -p /opt/cpu_ss7gw/...
25 15016 S+ 0 0 10 10 imf --platform X511 -p /opt/cpu_ss7gw/cur...
Watchdog Process Details on ROUTING - slot17_0.
WID PID STA RPT RHT HTV HTT COM
1 9869 S+ 0 0 10 10 sysmon.default -p /opt/cpu_ss7gw/current/...
2 9956 S+ 0 0 10 10 sysmon.cpucheck -p /opt/cpu_ss7gw/current...
3 10054 S+ 0 0 10 10 sysmon.diskmon -p /opt/cpu_ss7gw/current/...
4 10160 S+ 0 0 10 10 sysmon.logcpu -p /opt/cpu_ss7gw/current/s...
5 10331 S+ 0 0 10 10 sysmon.logmem -p /opt/cpu_ss7gw/current/s...
6 10585 S+ 0 0 10 10 sysmon.usbcheck -p /opt/cpu_ss7gw/current...
7 10672 S+ 0 0 10 10 sysmon.slotinventory -p /opt/cpu_ss7gw/cu...
8 10764 S+ 0 0 10 10 sysmon.configuremtu -p /opt/cpu_ss7gw/cur...
9 12949 S+ 0 0 10 10 licensed -r -f /opt/cpu_ss7gw/current/dat...
10 12971 S+ 0 0 10 10 dsc.1 -p /opt/cpu_ss7gw/current/data/dsc....
11 13136 S+ 0 0 10 10 dsc.2 -p /opt/cpu_ss7gw/current/data/dsc....
12 13294 S+ 0 0 10 10 dsc.3 -p /opt/cpu_ss7gw/current/data/dsc....
13 13501 S+ 0 0 10 9 dsc.4 -p /opt/cpu_ss7gw/current/data/dsc....
14 13660 S+ 0 0 10 10 dsc.5 -p /opt/cpu_ss7gw/current/data/dsc....
15 13819 S+ 0 0 10 10 dsc.6 -p /opt/cpu_ss7gw/current/data/dsc....
16 14019 S+ 0 0 10 10 dsc.7 -p /opt/cpu_ss7gw/current/data/dsc....
17 14392 S+ 0 0 10 10 dsc.8 -p /opt/cpu_ss7gw/current/data/dsc....
18 14556 S+ 0 0 10 10 dsc.9 -p /opt/cpu_ss7gw/current/data/dsc....
19 14715 S+ 0 0 10 10 dsc.10 -p /opt/cpu_ss7gw/current/data/dsc...
20 15047 S+ 0 0 10 10 iwf -p /opt/cpu_ss7gw/current/data/ --pla...
21 15258 S+ 0 0 10 10 dre --platform X511 -p /opt/cpu_ss7gw/cur...
22 15460 S+ 0 0 10 10 sccp --platform X511 -p /opt/cpu_ss7gw/cu...
23 15551 S+ 1 0 10 10 dinamo --platform X511 -p /opt/cpu_ss7gw/...
24 15717 S+ 0 0 10 10 l4cvtr --platform X511 -p /opt/cpu_ss7gw/...
25 15812 S+ 0 0 10 10 imf --platform X511 -p /opt/cpu_ss7gw/cur...
Watchdog Process Details on ROUTING - slot26_0.
WID PID STA RPT RHT HTV HTT COM
1 9612 S+ 0 0 10 10 sysmon.default -p /opt/cpu_ss7gw/current/...
2 9699 S+ 0 0 10 10 sysmon.cpucheck -p /opt/cpu_ss7gw/current...
3 9797 S+ 0 0 10 10 sysmon.diskmon -p /opt/cpu_ss7gw/current/...
4 9903 S+ 0 0 10 10 sysmon.logcpu -p /opt/cpu_ss7gw/current/s...
5 10074 S+ 0 0 10 10 sysmon.logmem -p /opt/cpu_ss7gw/current/s...
6 10327 S+ 0 0 10 10 sysmon.usbcheck -p /opt/cpu_ss7gw/current...
7 10414 S+ 0 0 10 10 sysmon.slotinventory -p /opt/cpu_ss7gw/cu...
8 10507 S+ 0 0 10 10 sysmon.configuremtu -p /opt/cpu_ss7gw/cur...
9 12694 S+ 0 0 10 10 licensed -r -f /opt/cpu_ss7gw/current/dat...
10 12716 S+ 0 0 10 10 dsc.1 -p /opt/cpu_ss7gw/current/data/dsc....
11 12881 S+ 0 0 10 10 dsc.2 -p /opt/cpu_ss7gw/current/data/dsc....
12 13040 S+ 0 0 10 10 dsc.3 -p /opt/cpu_ss7gw/current/data/dsc....
13 13247 S+ 0 0 10 10 dsc.4 -p /opt/cpu_ss7gw/current/data/dsc....
14 13406 S+ 0 0 10 10 dsc.5 -p /opt/cpu_ss7gw/current/data/dsc....
15 13565 S+ 0 0 10 10 dsc.6 -p /opt/cpu_ss7gw/current/data/dsc....
16 13787 S+ 0 0 10 10 dsc.7 -p /opt/cpu_ss7gw/current/data/dsc....
17 14138 S+ 0 0 10 10 dsc.8 -p /opt/cpu_ss7gw/current/data/dsc....
18 14302 S+ 0 0 10 10 dsc.9 -p /opt/cpu_ss7gw/current/data/dsc....
19 14461 S+ 0 0 10 10 dsc.10 -p /opt/cpu_ss7gw/current/data/dsc...
20 14815 S+ 0 0 10 10 iwf -p /opt/cpu_ss7gw/current/data/ --pla...
21 15004 S+ 0 0 10 10 dre --platform X511 -p /opt/cpu_ss7gw/cur...
22 15206 S+ 0 0 10 10 sccp --platform X511 -p /opt/cpu_ss7gw/cu...
23 3657 S+ 1 0 10 10 dinamo --platform X511 -p /opt/cpu_ss7gw/...
24 15463 S+ 0 0 10 10 l4cvtr --platform X511 -p /opt/cpu_ss7gw/...
25 15558 S+ 0 0 10 10 imf --platform X511 -p /opt/cpu_ss7gw/cur...
Watchdog Process Details on ROUTING - slot31_0.
WID PID STA RPT RHT HTV HTT COM
1 10348 S+ 0 0 10 10 sysmon.default -p /opt/cpu_ss7gw/current/...
2 10435 S+ 0 0 10 10 sysmon.cpucheck -p /opt/cpu_ss7gw/current...
3 10533 S+ 0 0 10 10 sysmon.diskmon -p /opt/cpu_ss7gw/current/...
4 10639 S+ 0 0 10 10 sysmon.logcpu -p /opt/cpu_ss7gw/current/s...
5 10810 S+ 0 0 10 10 sysmon.logmem -p /opt/cpu_ss7gw/current/s...
6 11064 S+ 0 0 10 10 sysmon.usbcheck -p /opt/cpu_ss7gw/current...
7 11151 S+ 0 0 10 10 sysmon.slotinventory -p /opt/cpu_ss7gw/cu...
8 11244 S+ 0 0 10 10 sysmon.configuremtu -p /opt/cpu_ss7gw/cur...
9 13434 S+ 0 0 10 10 licensed -r -f /opt/cpu_ss7gw/current/dat...
10 13456 S+ 0 0 10 10 dsc.1 -p /opt/cpu_ss7gw/current/data/dsc....
11 13621 S+ 0 0 10 10 dsc.2 -p /opt/cpu_ss7gw/current/data/dsc....
12 13780 S+ 0 0 10 10 dsc.3 -p /opt/cpu_ss7gw/current/data/dsc....
13 13987 S+ 0 0 10 10 dsc.4 -p /opt/cpu_ss7gw/current/data/dsc....
14 14146 S+ 0 0 10 10 dsc.5 -p /opt/cpu_ss7gw/current/data/dsc....
15 14305 S+ 0 0 10 10 dsc.6 -p /opt/cpu_ss7gw/current/data/dsc....
16 14497 S+ 0 0 10 10 dsc.7 -p /opt/cpu_ss7gw/current/data/dsc....
17 14899 S+ 0 0 10 10 dsc.8 -p /opt/cpu_ss7gw/current/data/dsc....
18 15063 S+ 0 0 10 10 dsc.9 -p /opt/cpu_ss7gw/current/data/dsc....
19 15222 S+ 0 0 10 10 dsc.10 -p /opt/cpu_ss7gw/current/data/dsc...
20 15555 S+ 0 0 10 10 iwf -p /opt/cpu_ss7gw/current/data/ --pla...
21 15765 S+ 0 0 10 10 dre --platform X511 -p /opt/cpu_ss7gw/cur...
22 15967 S+ 0 0 10 10 sccp --platform X511 -p /opt/cpu_ss7gw/cu...
23 26235 S+ 1 0 10 10 dinamo --platform X511 -p /opt/cpu_ss7gw/...
24 16224 S+ 0 0 10 10 l4cvtr --platform X511 -p /opt/cpu_ss7gw/...
25 16319 S+ 0 0 10 10 imf --platform X511 -p /opt/cpu_ss7gw/cur...
Watchdog Process Details on ROUTING - slot40_0.
WID PID STA RPT RHT HTV HTT COM
1 10268 S+ 0 0 10 10 sysmon.default -p /opt/cpu_ss7gw/current/...
2 10355 S+ 0 0 10 10 sysmon.cpucheck -p /opt/cpu_ss7gw/current...
3 10453 S+ 0 0 10 10 sysmon.diskmon -p /opt/cpu_ss7gw/current/...
4 10559 S+ 0 0 10 10 sysmon.logcpu -p /opt/cpu_ss7gw/current/s...
5 10730 S+ 0 0 10 10 sysmon.logmem -p /opt/cpu_ss7gw/current/s...
6 10984 S+ 0 0 10 10 sysmon.usbcheck -p /opt/cpu_ss7gw/current...
7 11071 S+ 0 0 10 10 sysmon.slotinventory -p /opt/cpu_ss7gw/cu...
8 11164 S+ 0 0 10 9 sysmon.configuremtu -p /opt/cpu_ss7gw/cur...
9 13177 S+ 0 0 10 10 licensed -r -f /opt/cpu_ss7gw/current/dat...
10 13255 S+ 0 0 10 10 dsc.1 -p /opt/cpu_ss7gw/current/data/dsc....
11 13420 S+ 0 0 10 10 dsc.2 -p /opt/cpu_ss7gw/current/data/dsc....
12 13579 S+ 0 0 10 10 dsc.3 -p /opt/cpu_ss7gw/current/data/dsc....
13 13786 S+ 0 0 10 10 dsc.4 -p /opt/cpu_ss7gw/current/data/dsc....
14 13945 S+ 0 0 10 10 dsc.5 -p /opt/cpu_ss7gw/current/data/dsc....
15 14104 S+ 0 0 10 10 dsc.6 -p /opt/cpu_ss7gw/current/data/dsc....
16 14331 S+ 0 0 10 10 dsc.7 -p /opt/cpu_ss7gw/current/data/dsc....
17 14677 S+ 0 0 10 10 dsc.8 -p /opt/cpu_ss7gw/current/data/dsc....
18 14841 S+ 0 0 10 10 dsc.9 -p /opt/cpu_ss7gw/current/data/dsc....
19 15000 S+ 0 0 10 10 dsc.10 -p /opt/cpu_ss7gw/current/data/dsc...
20 15374 S+ 0 0 10 10 iwf -p /opt/cpu_ss7gw/current/data/ --pla...
21 15610 S+ 0 0 10 10 dre --platform X511 -p /opt/cpu_ss7gw/cur...
22 15881 S+ 0 0 10 10 sccp --platform X511 -p /opt/cpu_ss7gw/cu...
23 28496 S+ 1 0 10 10 dinamo --platform X511 -p /opt/cpu_ss7gw/...
24 16196 S+ 0 0 10 10 l4cvtr --platform X511 -p /opt/cpu_ss7gw/...
25 16290 S+ 0 0 10 10 imf --platform X511 -p /opt/cpu_ss7gw/cur...
Watchdog Process Details on ROUTING - slot45_0.
WID PID STA RPT RHT HTV HTT COM
1 10638 S+ 0 0 10 10 sysmon.default -p /opt/cpu_ss7gw/current/...
2 10725 S+ 0 0 10 10 sysmon.cpucheck -p /opt/cpu_ss7gw/current...
3 10823 S+ 0 0 10 10 sysmon.diskmon -p /opt/cpu_ss7gw/current/...
4 10929 S+ 0 0 10 10 sysmon.logcpu -p /opt/cpu_ss7gw/current/s...
5 11100 S+ 0 0 10 10 sysmon.logmem -p /opt/cpu_ss7gw/current/s...
6 11354 S+ 0 0 10 10 sysmon.usbcheck -p /opt/cpu_ss7gw/current...
7 11447 S+ 0 0 10 10 sysmon.slotinventory -p /opt/cpu_ss7gw/cu...
8 11534 S+ 0 0 10 10 sysmon.configuremtu -p /opt/cpu_ss7gw/cur...
9 14114 S+ 0 0 10 10 licensed -r -f /opt/cpu_ss7gw/current/dat...
10 14136 S+ 0 0 10 10 dsc.1 -p /opt/cpu_ss7gw/current/data/dsc....
11 14301 S+ 0 0 10 10 dsc.2 -p /opt/cpu_ss7gw/current/data/dsc....
12 14484 S+ 0 0 10 10 dsc.3 -p /opt/cpu_ss7gw/current/data/dsc....
13 14726 S+ 0 0 10 10 dsc.4 -p /opt/cpu_ss7gw/current/data/dsc....
14 14894 S+ 0 0 10 10 dsc.5 -p /opt/cpu_ss7gw/current/data/dsc....
15 15053 S+ 0 0 10 10 dsc.6 -p /opt/cpu_ss7gw/current/data/dsc....
16 15237 S+ 0 0 10 10 dsc.7 -p /opt/cpu_ss7gw/current/data/dsc....
17 15631 S+ 0 0 10 10 dsc.8 -p /opt/cpu_ss7gw/current/data/dsc....
18 15790 S+ 0 0 10 10 dsc.9 -p /opt/cpu_ss7gw/current/data/dsc....
19 15949 S+ 0 0 10 10 dsc.10 -p /opt/cpu_ss7gw/current/data/dsc...
20 16266 S+ 0 0 10 10 iwf -p /opt/cpu_ss7gw/current/data/ --pla...
21 16492 S+ 0 0 10 10 dre --platform X511 -p /opt/cpu_ss7gw/cur...
22 16735 S+ 0 0 10 10 sccp --platform X511 -p /opt/cpu_ss7gw/cu...
23 29946 S+ 1 0 10 10 dinamo --platform X511 -p /opt/cpu_ss7gw/...
24 17077 S+ 0 0 10 10 l4cvtr --platform X511 -p /opt/cpu_ss7gw/...
25 17171 S+ 0 0 10 10 imf --platform X511 -p /opt/cpu_ss7gw/cur...
Watchdog Process Details on ROUTING - slot54_0.
WID PID STA RPT RHT HTV HTT COM
1 10253 S+ 0 0 10 10 sysmon.default -p /opt/cpu_ss7gw/current/...
2 10340 S+ 0 0 10 10 sysmon.cpucheck -p /opt/cpu_ss7gw/current...
3 10438 S+ 0 0 10 10 sysmon.diskmon -p /opt/cpu_ss7gw/current/...
4 10544 S+ 0 0 10 10 sysmon.logcpu -p /opt/cpu_ss7gw/current/s...
5 10715 S+ 0 0 10 10 sysmon.logmem -p /opt/cpu_ss7gw/current/s...
6 10969 S+ 0 0 10 10 sysmon.usbcheck -p /opt/cpu_ss7gw/current...
7 11062 S+ 0 0 10 10 sysmon.slotinventory -p /opt/cpu_ss7gw/cu...
8 11149 S+ 0 0 10 10 sysmon.configuremtu -p /opt/cpu_ss7gw/cur...
9 13997 S+ 0 0 10 10 licensed -r -f /opt/cpu_ss7gw/current/dat...
10 14019 S+ 0 0 10 10 dsc.1 -p /opt/cpu_ss7gw/current/data/dsc....
11 14184 S+ 0 0 10 10 dsc.2 -p /opt/cpu_ss7gw/current/data/dsc....
12 14343 S+ 0 0 10 10 dsc.3 -p /opt/cpu_ss7gw/current/data/dsc....
13 14550 S+ 0 0 10 10 dsc.4 -p /opt/cpu_ss7gw/current/data/dsc....
14 14709 S+ 0 0 10 10 dsc.5 -p /opt/cpu_ss7gw/current/data/dsc....
15 14868 S+ 0 0 10 10 dsc.6 -p /opt/cpu_ss7gw/current/data/dsc....
16 15104 S+ 0 0 10 10 dsc.7 -p /opt/cpu_ss7gw/current/data/dsc....
17 15509 S+ 0 0 10 10 dsc.8 -p /opt/cpu_ss7gw/current/data/dsc....
18 15673 S+ 0 0 10 10 dsc.9 -p /opt/cpu_ss7gw/current/data/dsc....
19 15832 S+ 0 0 10 10 dsc.10 -p /opt/cpu_ss7gw/current/data/dsc...
20 16196 S+ 0 0 10 10 iwf -p /opt/cpu_ss7gw/current/data/ --pla...
21 16399 S+ 0 0 10 10 dre --platform X511 -p /opt/cpu_ss7gw/cur...
22 16646 S+ 0 0 10 10 sccp --platform X511 -p /opt/cpu_ss7gw/cu...
23 5720 S+ 1 0 10 10 dinamo --platform X511 -p /opt/cpu_ss7gw/...
24 17028 S+ 0 0 10 10 l4cvtr --platform X511 -p /opt/cpu_ss7gw/...
25 17122 S+ 0 0 10 10 imf --platform X511 -p /opt/cpu_ss7gw/cur...
<Enter> to continue
Press Enter.
---------------------------------------------------
GWS Incoming Linkset check
---------------------------------------------------
No GWS Incoming Linkset check needed for this X511 version
<Enter> to continue
Press Enter.
-------------------------------------------------------------------------
Checking uniqueness of Linkset Point Codes per NA
-------------------------------------------------------------------------
PASSED
<Enter> to continue
Press Enter.
-------------------------------------------------------------------------
Checking if DB Definition of GTT NA and its LPC registration match
-------------------------------------------------------------------------
PASSED
<Enter> to continue
Press Enter.
---------------------------------------------------
Ensure pcs files are in proper locations...
---------------------------------------------------
PASSED
<Enter> to continue
Press Enter.
---------------------------------------------------
Ensure correct cluster password...
---------------------------------------------------
PASSED
<Enter> to continue
Press Enter.
---------------------------------------------------
Audit files check...
---------------------------------------------------
Audit status: local copy of /opt/cpu_ss7gw/current/data/mtp.1.12.conf is different from 13, due to blank lines only
Audit status: local copy of /opt/cpu_ss7gw/current/data/mtp.1.6.conf is different from 13, due to blank lines only
Audit status: local copy of /opt/cpu_ss7gw/current/data/mtp.1.5.conf is different from 13, due to blank lines only
Audit status: local copy of /opt/cpu_ss7gw/current/data/mtp.1.4.conf is different from 13, due to blank lines only
Audit status: local copy of /opt/cpu_ss7gw/current/data/mtp.1.2.conf is different from 13, due to blank lines only
Audit status: local copy of /opt/cpu_ss7gw/current/data/mtp.1.15.conf is different from 13, due to blank lines only
Audit status: local copy of /opt/cpu_ss7gw/current/data/mtp.1.1.conf is different from 13, due to blank lines only
Audit status: local copy of /opt/cpu_ss7gw/current/data/mtp.1.7.conf is different from 13, due to blank lines only
0 files were out of sync.
Files: 93
Copied: 0
Deleted: 0
PASSED
<Enter> to continue
Press Enter.
---------------------------------------------------
Test TIPC bearers...
---------------------------------------------------
<Enter> to continue
Press Enter.
----------------------------------------------------------------
Checking if license keys need to be changed
----------------------------------------------------------------
PASSED
Enter> to continue
Press Enter.
---------------------------------------------------
Reminder to take a backup...
---------------------------------------------------
-It is highly recommended to take a backup of the system prior to starting the upgrade. Label and keep the backup in a safe place.
<Enter> to continue
Press .
====== The results of the PRE upgrade check are stored in /var/log/cpu_ss7gw/upgrade_data/PRE_UPGRADE_DATA.dsc_8000_21_0_3_nb20230118.Thu_May_1
8_02_39_36_EDT_2023
====== Upgrade PRE checks completed. All checks PASSED. You may now proceed with the upgrade.
----------------------------Upgrade Information-----------------------------
Using /shared/log/dsc_8000_23_0_0_nb20230517_upgrade.sh
Upgrading to: 23_0_0_nb20230517
Requiring update: 2 3 12 13 17 26 31 40 45 54
Up to date: None
I/O Cards: 18 19 21 22 23 24 25
Uncommissioned/Bad: None
Confirmation to proceed with upgrade operations? (yes/no): yes
Invalid input. yes or no is required
Type "yes" and press .
-----------------------Upgrade Preparations (part 1)------------------------
Copying upgrade package and preparing each CPU.
Preparing 13
Checking mounts.................Pass
Checking available space........Pass
Sending package.................Pass
Preparing 3
Checking mounts.................Pass
Checking available space........Pass
Sending package.................Pass
Preparing 12
Checking mounts.................Pass
Checking available space........Pass
Sending package.................Pass
Preparing 17
Checking mounts.................Pass
Checking available space........Pass
Sending package.................Pass
Preparing 26
Checking mounts.................Pass
Checking available space........Pass
Sending package.................Pass
Preparing 31
Checking mounts.................Pass
Checking available space........Pass
Sending package.................Pass
Preparing 40
Checking mounts.................Pass
Checking available space........Pass
Sending package.................Pass
Preparing 45
Checking mounts.................Pass
Checking available space........Pass
Sending package.................Pass
Preparing 54
Checking mounts.................Pass
Checking available space........Pass
Sending package.................Pass
Setting up new OS files on 13: Started
Setting up new OS files on 3: Started
Setting up new OS files on 12: Started
Setting up new OS files on 17: Started
Setting up new OS files on 26: Started
Setting up new OS files on 31: Started
Setting up new OS files on 40: Started
Setting up new OS files on 45: Started
Setting up new OS files on 54: Started
Waiting for OS setup to finish...
3: Pass
26: Pass
13: Pass
12: Pass
17: Pass
31: Pass
40: Pass
54: Pass
45: Pass
-------------------------------System Backup--------------------------------
Generating new backup..............Pass
-----------------------Upgrade Preparations (part 2)------------------------
Preparing 13
fstab, restore id and keys......Pass
Copying backup..................Pass
Preparing 3
fstab, restore id and keys......Pass
Copying backup..................Pass
Preparing 12
fstab, restore id and keys......Pass
Copying backup..................Pass
Preparing 17
fstab, restore id and keys......Pass
Copying backup..................Pass
Preparing 26
fstab, restore id and keys......Pass
Copying backup..................Pass
Preparing 31
fstab, restore id and keys......Pass
Copying backup..................Pass
Preparing 40
fstab, restore id and keys......Pass
Copying backup..................Pass
Preparing 45
fstab, restore id and keys......Pass
Copying backup..................Pass
Preparing 54
fstab, restore id and keys......Pass
Copying backup..................Pass
Preparing 2
fstab, restore id and keys......Pass
Copying backup..................NA
Should user input (a y/n prompt) be required after each CPU is upgraded? (yes/no) [n]: yes
Type "yes" and press Enter.
Upgrade execution order [13, 3, 12, 17, 26, 31, 40, 45, 54, 2]. To continue, press the Enter key:
Press Enter.
-----------------------------Final upgrade step-----------------------------
Upgrading peer 13
Backup stats files..............Pass
Storing user directories........Pass
Modify boot file................Pass
Setting restore information.....Pass
Rebooting.......................Pass
Waiting to recover..............Pass
Waiting for system processes....Pass
Machine 13 is complete, type "yes" to continue.: yes
The script will upgrade remaining cards one at a time. Respond with "yes" when prompted to continue.
- Continue to upgrade all CPUs. After the software upgrade is completed on the CPUs, ensure that the upgrade was successful and the software was properly installed. See Verify the CPU Software has been Properly Installed.
Verify the CPU Software has been Properly Installed
Caution
If an asterisk appears beside any of the system cards during the verification process, the upgrade for the respective card was unsuccessful. In this case, it is recommended that you contact Customer Support.
Start
- At the Linux prompt, enter startmenu, and press Enter.
- Select System, and press Enter.
- Select Software Revisions, and press Enter.
- Select CPU Versions, and press Enter
Make sure that the software and OS have been upgraded, all cards are running the same software, and that there are no asterisks beside any of the cards.
Tip
The output of the “CPU Versions” command shows that the CPU card has “UPGRADED” status if this is the first time the command is issued after an upgrade. All subsequent “CPU Versions” commands show the number of processes running on each CPU.
AVAILABLE SOFTWARE VERSIONS
--------------------------------------------------------------------------------
No new load detected on system. Upload and run load .sh file on /var/log before attempting upgrade.
CPU (current) dsc_8000_23_0_0_nb20230517 OS: Ribbon7.9.20
(Servicepack) [none applied]
CPU (previous) dsc_8000_21_0_3_nb20230118 OS: Ribbon7.9.11
(Servicepack)
RUNNING SOFTWARE VERSIONS (*=update required, ?=update unknown)
CARD BUILD SERVICE O/S
-SLOT----TYPE----------RELEASE--VERSION----PACK---IMAGE-------CARD STATUS---
--------------------------------------------------------------------------------
-- Chassis 1 --
Slot 2 MGMT 23.0.0 (nb20230517) SP: OS: Ribbon7.9.20 19 procs running
Slot 13 MGMT 23.0.0 (nb20230517) SP: OS: Ribbon7.9.20 19 procs running
Slot 3 ROUTING 23.0.0 (nb20230517) SP: OS: Ribbon7.9.20 25 procs running
Slot 12 ROUTING 23.0.0 (nb20230517) SP: OS: Ribbon7.9.20 25 procs running
-- Chassis 2 --
Slot 17 ROUTING 23.0.0 (nb20230517) SP: OS: Ribbon7.9.20 25 procs running
Slot 26 ROUTING 23.0.0 (nb20230517) SP: OS: Ribbon7.9.20 25 procs running
-- Chassis 3 --
Slot 31 ROUTING 23.0.0 (nb20230517) SP: OS: Ribbon7.9.20 25 procs running
Slot 40 ROUTING 23.0.0 (nb20230517) SP: OS: Ribbon7.9.20 25 procs running
-- Chassis 4 --
Slot 45 ROUTING 23.0.0 (nb20230517) SP: OS: Ribbon7.9.20 25 procs running
Slot 54 ROUTING 23.0.0 (nb20230517) SP: OS: Ribbon7.9.20 25 procs running
(p=servicepack is partially applied)
Select CPU Slot number (17 26 31 40 45 54) to decommission an optional CPU.
- Press Enter to cancel.
- Pressing Enter displays the Main Menu.
Upgrade the Software on the Ethernet (MCH) Cards
Start
- At the Linux prompt, enter startmenu, and press Enter.
- Select System, and press Enter.
- Select Software Revisions, and press Enter.
Select Switch Versions, and press Enter.
AVAILABLE SOFTWARE VERSIONS
--------------------------------------------------------------------------------
MCH (current) dsc_8000_23_0_0_nb20230517
(Servicepack) [none applied]
MCH (previous) dsc_8000_21_0_3_nb20230118
(Servicepack)
RUNNING SOFTWARE VERSIONS (*=update required, ?=update unknown)
CARD BUILD SERVICE O/S
-SLOT----TYPE------RELEASE-VERSION----PACK-----IMAGE------------CARD STATUS-----
--------------------------------------------------------------------------------
-- Chassis 1 --
Slot 1 MCH * 21.0.3 (nb20230118) SP:
Slot 14 MCH * 21.0.3 (nb20230118) SP:
-- Chassis 2 --
Slot 15 MCH * 21.0.3 (nb20230118) SP:
Slot 28 MCH * 21.0.3 (nb20230118) SP:
-- Chassis 3 --
Slot 29 MCH * 21.0.3 (nb20230118) SP:
Slot 42 MCH * 21.0.3 (nb20230118) SP:
-- Chassis 4 --
Slot 43 MCH * 21.0.3 (nb20230118) SP:
Slot 56 MCH * 21.0.3 (nb20230118) SP:
(p=servicepack is partially applied)
Status legend: A - Active, S - Standby, ? - Unknown
Select MCH slot number (1 14 15 28 29 42 43 56) to begin upgrade of ISM and SWITCH functions on that MCH.
VERSION field modifiers (investigate & update):
'***' - a mismatch between the two switches within the MCH.
'*!!' - one of the two switches within the MCH is unreachable.
Enter slot # or ENTER to cancel: 14
Type "14" and press Enter.
Note: flex_slot.conf file doesn't exist ... This is ok if the SDA is not configured on the system.
Software Update for Switch Card in Slot #14
Determining running and current software version. Please wait...
Running on SWITCH (slot14_0):
-Load: dsc_8000_21_0_3_nb20230118
Current SWITCH version (on MGMT CPU):
-Load: dsc_8000_23_0_0_nb20230517
-Servicepack: [none applied]
'u' - Update version (update slot14_0 to match the current load):
-Load: dsc_8000_23_0_0_nb20230517
Select action to take, or any other key to cancel: u
Type "u" and press Enter.
avail_switch_current_load is dsc_8000_23_0_0_nb20230517
avail_ism_current_load is Not_Available
Running SWITCH software is out-of-date!
You have opted to update/reboot slot #14, thereby loading
the current software:
-Load: dsc_8000_23_0_0_nb20230517
-Servicepack: [none applied]
MCH upgrade pre-step: disable TIPC bearer p19p2 for MCH 1.
Updating/rebooting switch card in slot #14. Please wait...
Note: The switch status may be unavailable for a few minutes
while it performs its upgrade procedures.
CPU local tftp is enabled.
Running SWITCH slot 14 software is now up-to-date.
MCH upgrade post-step: enable TIPC bearer p19p2 for MCH 1.
Navigate to Software Revisions, and press Enter.
Select Switch Versions, and press .
AVAILABLE SOFTWARE VERSIONS
--------------------------------------------------------------------------------
MCH (current) dsc_8000_23_0_0_nb20230517
(Servicepack) [none applied]
MCH (previous) dsc_8000_21_0_3_nb20230118
(Servicepack)
RUNNING SOFTWARE VERSIONS (*=update required, ?=update unknown)
CARD BUILD SERVICE O/S
-SLOT----TYPE------RELEASE-VERSION----PACK-----IMAGE------------CARD STATUS-----
--------------------------------------------------------------------------------
-- Chassis 1 --
Slot 1 MCH * 21.0.3 (nb20230118) SP:
Slot 14 MCH 23.0.0 (nb20230517) SP:
-- Chassis 2 --
Slot 15 MCH 23.0.0 (nb20230517) SP:
Slot 28 MCH 23.0.0 (nb20230517) SP:
-- Chassis 3 --
Slot 29 MCH 23.0.0 (nb20230517) SP:
Slot 42 MCH 23.0.0 (nb20230517) SP:
-- Chassis 4 --
Slot 43 MCH 23.0.0 (nb20230517) SP:
Slot 56 MCH 23.0.0 (nb20230517) SP:
(p=servicepack is partially applied)
Status legend: A - Active, S - Standby, ? - Unknown
Select MCH slot number (1 14 15 28 29 42 43 56) to begin upgrade of ISM and SWITCH functions on that MCH.
VERSION field modifiers (investigate & update):
'***' - a mismatch between the two switches within the MCH.
'*!!' - one of the two switches within the MCH is unreachable.
Enter slot # or ENTER to cancel: 1
Type "1" and press .
Note: flex_slot.conf file doesn't exist ... This is ok if the SDA is not configured on the system.
Software Update for Switch Card in Slot #1
Determining running and current software version. Please wait...
Running on SWITCH (slot1_0):
-Load: dsc_8000_21_0_3_nb20230118
Current SWITCH version (on MGMT CPU):
-Load: dsc_8000_23_0_0_nb20230517
-Servicepack: [none applied]
Type "u" and press .
avail_switch_current_load is dsc_8000_23_0_0_nb20230517
avail_ism_current_load is Not_Available
Running SWITCH software is out-of-date!
You have opted to update/reboot slot #1, thereby loading
the current software:
-Load: dsc_8000_23_0_0_nb20230517
-Servicepack: [none applied]
MCH upgrade pre-step: disable TIPC bearer p19p1 for MCH 0.
Updating/rebooting switch card in slot #1. Please wait...
Note: The switch status may be unavailable for a few minutes
while it performs its upgrade procedures.
CPU local tftp is enabled.
Connection closed by foreign host.
Execute steps 1 to 10 for each shelf (chassis) if you have a multi-shelf system.
The slot numbers for the MCH cards in a multishelf configuration are as follows:
- Expansion Shelf 1 MCH slot numbers are 15 and 28
- Expansion Shelf 2 MCH slot numbers are 29 and 42
- Expansion Shelf 3 MCH slot numbers are 43 and 56
For more informaiton about the DSC 8000 hardware configuration, refer to DSC 8000 Hardware Description.
- After the software upgrade is complete, make sure the upgrade was successful and the software was properly installed. See Verify the Ethernet Switch (MCH) Software has been Properly Installed.
Verify the Ethernet Switch (MCH) Software has been Properly Installed
Caution
If an asterisk appears beside any of the system cards during the verification process, the upgrade for the respective card was unsuccessful. In this case, is recommended that you contact Customer Support.
Start
- To confirm the Ethernet Switch cards are also running the same software as the CPU cards, do the following:
- Navigate to the Software Revisions screen.
- Select Switch Versions, and press Enter.
Make sure the software and OS have been upgraded, all cards are running the same software, and there is no asterisk beside any of the .
AVAILABLE SOFTWARE VERSIONS
--------------------------------------------------------------------------------
MCH (current) dsc_8000_23_0_0_nb20230517
(Servicepack) [none applied]
MCH (previous) dsc_8000_21_0_3_nb20230118
(Servicepack)
RUNNING SOFTWARE VERSIONS (*=update required, ?=update unknown)
CARD BUILD SERVICE O/S
-SLOT----TYPE------RELEASE-VERSION----PACK-----IMAGE------------CARD STATUS-----
--------------------------------------------------------------------------------
-- Chassis 1 --
Slot 1 MCH 23.0.0 (nb20230517) SP:
Slot 14 MCH 23.0.0 (nb20230517) SP:
-- Chassis 2 --
Slot 15 MCH 23.0.0 (nb20230517) SP:
Slot 28 MCH 23.0.0 (nb20230517) SP:
-- Chassis 3 --
Slot 29 MCH 23.0.0 (nb20230517) SP:
Slot 42 MCH 23.0.0 (nb20230517) SP:
-- Chassis 4 --
Slot 43 MCH 23.0.0 (nb20230517) SP:
Slot 56 MCH 23.0.0 (nb20230517) SP:
(p=servicepack is partially applied)
Status legend: A - Active, S - Standby, ? - Unknown
Select MCH slot number (1 14 15 28 29 42 43 56) to begin upgrade of ISM and SWITCH functions on that MCH.
VERSION field modifiers (investigate & update):
'***' - a mismatch between the two switches within the MCH.
'*!!' - one of the two switches within the MCH is unreachable.
Enter slot # or ENTER to cancel:
- Pressing Enter twice displays the Main Menu.
Upgrade the Software on the IO Cards
Execute both of the following procedures in order to upgrade the software on the IO cards.
Verify the Health of the IO Configuration Files
Use this procedure if the system contains IO cards. This procedure executes a health check script that verifies the existence of the mp_mtp2.conf.slotX files on the IO card as well as its synchronization to the management CPU card (X is the IO slot number).
Start
- Log onto a Management CPU.
Execute the health check script.
health_check_io.sh <IO number>
This command should be executed for each IO.
- The script produces a health check result, which is either PASS or ERROR.
- If the result is ERROR, the issue is either missing files or mismatched files on the IO card.
When an issue is detected, the script allows the user to copy the necessary files from the management CPU card to the IO card. If all the files are retrieved successfully, then the result will be PASS. Do not proceed further until the result in PASS. - If the result is PASS, proceed to Upgrade the Software on the IO Cards.
Upgrade the Software on the IO Cards
Prerequisites
- You are logged onto a Management CPU.
Start
- At the Linux prompt, enter startmenu, and press Enter.
- Select System, and press Enter.
- Select Software Revisions, and press Enter.
Select IO Versions and press Enter.
AVAILABLE SOFTWARE VERSIONS
--------------------------------------------------------------------------------
IO (current) AMC348 dsc_8000_23_0_0_nb20230517 OS: rel_12_00_p04.x511.img
(Servicepack) [none applied]
IO (prev) AMC348 dsc_8000_21_0_3_nb20230118 OS: rel_12_00_p04.x511.img
(Servicepack)
RUNNING SOFTWARE VERSIONS (*=update required, ?=update unknown)
CARD BUILD SERVICE O/S
-SLOT----TYPE----------RELEASE-VERSION------PACK-----IMAGE-------
--------------------------------------------------------------------------------
-- Chassis 1 --
-- Chassis 2 --
Slot 18 IO AMC348 * 21.0.3 (nb20230118) SP: OS: rel_12_00_p04.x511.img
Slot 19 IO AMC348 * 21.0.3 (nb20230118) SP: OS: rel_12_00_p04.x511.img
Slot 21 IO AMC348 * 21.0.3 (nb20230118) SP: OS: rel_12_00_p04.x511.img
Slot 22 IO AMC348 * 21.0.3 (nb20230118) SP: OS: rel_12_00_p04.x511.img
Slot 23 IO AMC348 * 21.0.3 (nb20230118) SP: OS: rel_12_00_p04.x511.img
Slot 24 IO AMC348 * 21.0.3 (nb20230118) SP: OS: rel_12_00_p04.x511.img
Slot 25 IO AMC348 * 21.0.3 (nb20230118) SP: OS: rel_12_00_p04.x511.img
-- Chassis 3 --
-- Chassis 4 --
(p=servicepack is partially applied)
Select IO slot number (18 19 21 22 23 24 25) to begin upgrade
or decommissioning of individual card(s).
Enter slot # or ENTER to cancel: 18
Enter the slot number for the IO card as required (in this example, 18) and press Enter.
Tip
You may be prompted for a password from the IO card. To proceed with the upgrade, enter the root password.
Note: flex_slot.conf file doesn't exist ... This is ok if the SDA is not configured on the system.
Software Update for IO Card in Slot #18
Determining running and current software version. Please wait...
Running on IO (slot18_0):
-Load: dsc_8000_21_0_3_nb20230118
-OS: rel_12_00_p04.x511.img
Current IO version (on MGMT CPU):
-Load: dsc_8000_23_0_0_nb20230517
-OS: rel_12_00_p04.x511.img
-Servicepack: [none applied]
'u' - Update version (update slot18_0 to match the current load):
-Load: dsc_8000_23_0_0_nb20230517
-OS: rel_12_00_p04.x511.img
'd' - Decommission this IO card to prepare it for removal.
Select action to take, or any other key to cancel: u
Enter "u" and press Enter.
avail_switch_current_load is dsc_8000_23_0_0_nb20230517
avail_ism_current_load is Not_Available
Running IO software is out-of-date!
You have opted to update/reboot slot #18, thereby loading
the current software:
-Load: dsc_8000_23_0_0_nb20230517
-OS: rel_12_00_p04.x511.img
-Servicepack: [none applied]
Pushing image to the IO card in slot #18
Executing verify_io_image.sh script on IO board in slot #18
DO NOT INTERRUPT!! THIS MAY TAKE A FEW MINUTES...
Done: IO board was already up-to-date
Rebooting IO card in slot #18.
Press Enter and return to the main menu.
Repeat steps 1 to 7 for all other IO cards in the system as required.
- After the software upgrade is complete, make sure the upgrade was successful and the software was properly installed by continuing to the next section.
Verify the IO Software has been Properly Installed
Caution
If an asterisk appears beside any of the system cards during the verification process, the upgrade for the respective card was unsuccessful. In this case, is recommended that you contact Customer Support.
Start
- To confirm the IO cards are also running the same software as the CPU cards, do the following:
- Navigate to the Software Revisions screen.
Select IO Versions, and press Enter.
Make sure the software and OS have been upgraded, all cards are running the same software, and there is no asterisk beside any of the .
Tip
You may be prompted to enter the appropriate password.
AVAILABLE SOFTWARE VERSIONS
--------------------------------------------------------------------------------
IO (current) AMC348 dsc_8000_23_0_0_nb20230517 OS: rel_12_00_p04.x511.img
(Servicepack) [none applied]
IO (prev) AMC348 dsc_8000_21_0_3_nb20230118 OS: rel_12_00_p04.x511.img
(Servicepack)
RUNNING SOFTWARE VERSIONS (*=update required, ?=update unknown)
CARD BUILD SERVICE OS
-SLOT-----TYPE--------RELEASE--VERSION-------PACK------IMAGE---------------------
-- Chassis 1 --
-- Chassis 2 --
Slot 18 IO AMC348 23.0.0 (nb20230517) SP: OS: rel_12_00_p04.x511.img
Slot 19 IO AMC348 23.0.0 (nb20230517) SP: OS: rel_12_00_p04.x511.img
Slot 21 IO AMC348 23.0.0 (nb20230517) SP: OS: rel_12_00_p04.x511.img
Slot 22 IO AMC348 23.0.0 (nb20230517) SP: OS: rel_12_00_p04.x511.img
Slot 23 IO AMC348 23.0.0 (nb20230517) SP: OS: rel_12_00_p04.x511.img
Slot 24 IO AMC348 23.0.0 (nb20230517) SP: OS: rel_12_00_p04.x511.img
Slot 25 IO AMC348 23.0.0 (nb20230517) SP: OS: rel_12_00_p04.x511.img
-- Chassis 3 --
-- Chassis 4 --
(p=servicepack is partially applied)
Select IO slot number (18 19 21 22 23 24 25) to begin upgrade or decommissioning of individual card(s).
Enter slot # or ENTER to cancel:
- Pressing Enter twice displays the Main Menu.