In this section:
This section specifies the Privacy parameters for Egress Ip Attributes.
To View and Edit Privacy - Flags
On SBC main screen, go to Configuration > System Provisioning > Category: Trunk Provisioning > Ip Signaling Profile > Egress Ip Attributes > Privacy > Flags. The Flags window is displayed.
DEFAULT_H323
On the Flags window, choose the Ip Signaling Profile as DEFAULT_H323 to view the Privacy-Flags parameters for H323 Trunk Group.
Figure 1: Trunk Provisioning - Egress Ip Attributes H323 Privacy-Flags
There are no Privacy-Flags parameters for DEFAULT_H323 type of Egress Ip Attributes.
DEFAULT_SIP
On the Flags window, choose the Ip Signaling Profile as DEFAULT_SIP to view the Privacy-Flags for SIP Trunk Group.
Figure 2: Trunk Provisioning - Egress Ip Attributes SIP Privacy-Flags
The following fields are displayed:
Table 1: Egress Ip Attributes SIP Privacy Parameters
Parameter | Description |
|---|---|
Include Privacy | Specifies whether to enable the Privacy flag for Egress IP Attributes or not. The options are:
|
Privacy Required By Proxy | Specifies whether to enable the Privacy Required by Proxy flag for Egress IP Attributes or not. The options are:
|
Ms Lync Privacy Support | Specified whether to enable the Microsoft Lync Privacy Support flag for Egress IP Attributes or not. The options are:
|
Include Embedded PAIHeader In Redirected Invite | Specifies whether to include the embedded PAI headers in the redirected invites or not. The options are:
|
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.
Overview
Content Tools