This section specifies the signaling and media Quality of Experience configuration.
To View and Edit Qoe
On SBC main screen, go to Configuration > System Provisioning > Category: Trunk Provisioning > Trunk Group > H323Trunk Group > H323 Trunk Advanced > Qoe. The Qoe window is displayed.
The Qoe can be checked for each Address Context, for each Zone, for each H323Trunk Group created or for all the Address Contexts, Zones and H323Trunk Groups created. Use the drop-down box to select the desired Address Context, Zone and H323Trunk Group.
The Edit Qoe window is displayed.
Figure 1: H323 Trunk Advanced - Qoe Edit Window
The following fields are displayed:
Table 1: H323 Trunk Advanced - Qoe Parameters
|
|
|---|---|
Min Time to Proceed | Specifies the minimum time period before call admission starts after any of the TG's KPI fall below the critical threshold. The value range from 0 - 3600 seconds and the default value is 60 seconds. |
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.
Additional topics:
Overview
Content Tools