You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

In this section:


The Revert Software Version window provides the option to revert from the current

Unable to show "metadata-from": No such page "_space_variables"
 software version to the previous version.

On the

Unable to show "metadata-from": No such page "_space_variables"
 main screen, go to  Administration > System Administration > Revert Software Version. The Revert Software Version window is displayed.

Figure 1: Initial Revert Software Version Screen


This window is divided into two panes :

Installed Software Versions

This pane lists the software versions installed on each partition of the

Unable to show "metadata-from": No such page "_space_variables"
. This information displayed in this pane is based on whether the
Unable to show "metadata-from": No such page "_space_variables"
 is standalone or part of an HA pair.

The following parameters are displayed:

Table 1: Installed Software Versions Parameters

Parameter NameDescription
System/Partition

Each server name is listed twice in this column accompanied by a version label, Version 1 and Version 2.

  • Version 1 - This signifies the previous software version to revert to.
  • Version 2 - This signifies the latest software version.
Installed Software Version
The
Unable to show "metadata-from": No such page "_space_variables"
installed software version of each system/partiion displays in this field. 
Current Boot Version

A check mark ((tick) ) in this field indicates the partition is the current

Unable to show "metadata-from": No such page "_space_variables"
boot version.

In the following example, the

Unable to show "metadata-from": No such page "_space_variables"
 is standalone and Version 2 is the current boot version.

Figure 2: Installed Software Versions Screen


Revert Software

This pane provides the details on reverting the

Unable to show "metadata-from": No such page "_space_variables"
 software. If the software version for the
Unable to show "metadata-from": No such page "_space_variables"
 is supported for reverting, then a list of the specific server name(s) is displayed in the Revert Software pane.

The following parameters are displayed:

Table 2: Revert Software Parameter Information

Parameter NameDescription
Revert the software boot versionThis specifies the name of the servers used for reverting.
Version
This specifies the revert version of the
Unable to show "metadata-from": No such page "_space_variables"
application.
Last used

This specifies when the

Unable to show "metadata-from": No such page "_space_variables"
software was last used.

To Revert Software

  1. Click  to start the revert process.
    The Change Boot Version confirmation dialog displays.

  2. Click Ok to continue. The revert operation takes around 15 to 20 minutes to complete.

    Note

    At this point the

    Unable to show "metadata-from": No such page "_space_variables"
    reboots and the EMA Platform Mode login screen displays.

  3. Re-login to the

    Unable to show "metadata-from": No such page "_space_variables"
     in the Platform mode.

  4. Navigate to Administration > System Administration > Revert Software Version. The Revert Software Version window appears.

    Only the reverted software version is displayed. This concludes the Revert Software functionality. For more information on reverting the

    Unable to show "metadata-from": No such page "_space_variables"
     application, refer to Reverting SBC Application.

    Note

    In the following example, the

    Unable to show "metadata-from": No such page "_space_variables"
    is part of an HA pair. Perform the Revert Software functionality on the Standby (now Active) SBC too.

  • No labels