Specifies the attributes for Composite tone configuration. On SBC main screen, go to All > Profiles Management > Media > Tone Profile > Composite Tone. Select the desired Tone Profile from the drop-down list to view its respective Composite Tone parameters. The Composite Tone window is displayed. Parameter Description Tone1 Frequency Specifies Tone 1 Frequency in Hertz. If 0, then silence is generated. Only valid if generation method is singleTone, dualTone, or compositeTone. Tone1 Power Specifies Tone 1 Power in dBm. Power levels range from -50 dBm (minimum power) to +3 dBm (maximum power). Only valid if generation method is singleTone, dualTone, or compositeTone. Tone1 Apply Specifies the cadences to which Tone 1 is applied. Application is as follows: If 0, then Tone 1 is applied to Cadences 1, 2, and 3. If 1, then Tone 1 is applied to Cadence 1. If 2, then Tone 1 is applied to Cadence 2. If 3, then Tone 1 is applied to Cadence 3. Only valid if generation method is compositeTone. Tone2 Frequency Specifies Tone 2 Frequency in Hertz. If 0, then a single frequency tone is generated. Only valid if generation method is dualTone or compositeTone. Tone2 Power Specifies Tone 2 Power in dBm. Power levels range from -50 dBm (minimum power) to +3 dBm (maximum power). Only valid if generation method is dualTone or compositeTone. Tone2 Apply Specifies the cadences to which Tone 2 is applied. Application is as follows: If 0, then Tone 2 is applied to Cadences 1, 2, and 3. If 1, then Tone 2 is applied to Cadence 1. If 2, then Tone 2 is applied to Cadence 2. If 3, then Tone 2 is applied to Cadence 3. Only valid if generation method is compositeTone. Tone3 Frequency Specifies Tone 3 Frequency in Hertz. If 0, then a single or dual frequency tone is generated. Only valid if generation method is compositeTone. Tone3 Power Specifies Tone 3 Power in dBm. Power levels range from -50 dBm (minimum power) to +3 dBm (maximum power). Only valid if generation method is compositeTone. Tone3 Apply Specifies the cadences to which Tone 3 is applied. Application is as follows: If 0, then Tone 3 is applied to Cadences 1, 2, and 3. If 1, then Tone 3 is applied to Cadence 1. If 2, then Tone 3 is applied to Cadence 2. If 3, then Tone 3 is applied to Cadence 3. Only valid if generation method is compositeTone. Tone4 Frequency Specifies Tone 4 Frequency in Hertz. If 0, then a single or dual frequency tone is generated. Only valid if generation method is compositeTone. Tone4 Power Specifies Tone 4 Power in dBm. Power levels range from -50 dBm (minimum power) to +3 dBm (maximum power). Only valid if generation method is compositeTone. Tone4 Apply Specifies the cadences to which Tone 1 is applied. Application is as follows: If 0, then Tone 4 is applied to Cadences 1, 2, and 3. If 1, then Tone 4 is applied to Cadence 1. If 2, then Tone 4 is applied to Cadence 2. If 3, then Tone 4 is applied to Cadence 3. Only valid if generation method is compositeTone. Decay Time Specifies exponential decay time constant in milliseconds. If 0, then no decay is applied. Maximum value is 2000 msec. Only valid if generation method is compositeTone. Decay Frequency Delta Specifies rate of change (Hz/s) of the tone frequency. If 0, then no frequency change rate is applied. Only valid if generation method is compositeTone. Decay Apply Specifies the tones to which decay and frequency rate change are applied. Application is by bitmap: Make the required changes and click Save at the right hand bottom of the panel to save the changes made.To View and Edit Composite Tone
Cadence
Cadence
Cadence
Cadence
Constant
Tone Bit Map