- Created by Ribbon Communications, last modified on Apr 28, 2023
You are viewing an old version of this page. View the current version.
Compare with Current View Page History
« Previous Version 2 Next »
HA-related configuration options are available in the SBC SWe Edge WebUI if you have purchased the HA SKU. The following provides information on WebUI changes to the entities of the five general tabs in the SBC SWe Edge:
By default, you can only configure the settings of your SBC SWe Edge through the Active instance. The Standby instance is mainly in a view-only permissions mode unless otherwise specified.
Folder | Subfolder/Task | WebUI Path | Active Instance | Standby Instance | WebUI Changes | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Signaling Groups | Add SIP SG | Settings > Signaling Groups > Signaling Group Table |
| Add SIP SG on the Standby Instance - View-only permissions |
| ||||||||||||
Networking Interfaces | Logical Interfaces | Settings > Networking Interfaces > Logical Interfaces | An Example of a Packet Interface Supporting Only the IPv4 Address on the Active Instance |
HA Interface Field Descriptions
Note
You can configure all the interfaces on the Active instance, but can only configure the Admin IP and High Availability interfaces on the Standby instance.
| |||||||||||||
System | Node-Level Settings | Settings > System > Node-Level Settings | Enable HA Button Fields in the Create HA Interface Window HA Pair Name Field Under the Ribbon Application Management Platform (RAMP) section - Connect to RAMP HA Pair Name Field Under the Ribbon Application Management Platform (RAMP) section - Connect to RAMP with Redundancy | Enable HA Button Fields in the Create HA Interface Window HA Pair Name Field Under the Ribbon Application Management Platform (RAMP) section - Connect to RAMP HA Pair Name Field Under the Ribbon Application Management Platform (RAMP) section - Connect to RAMP with Redundancy |
HA Interface Field Descriptions
Note
The Active and Standby instances reboot after you enable HA and change the local or remote IP addresses.
Ribbon Application Management Platform (RAMP) Field Description
Note
You must configure the connection to RAMP on both the Active and the Standby instances. Make sure that both instances point to the same RAMP server. Note
Make sure that the RAMP servers are deployed in the geographically redundant (GR) mode if you choose to configure with the secondary RAMP server. For more information on configuring a GR RAMP deployment, refer to Configuring RAMP GR. | ||||||||||||
Install New License | Settings > System > Licensing | N/A | N/A |
| |||||||||||||
Application Partitions | Settings > System > Software Management |
| |||||||||||||||
SIP | SIP Recording | Settings > SIP | N/A | N/A |
|
By default, you can only configure the settings of your SBC SWe Edge through the Active instance. The Standby instance is mainly in a view-only permissions mode unless otherwise specified.
Task | Subtask | WebUI Path | Active Instance | Standby Instance | WebUI Changes |
---|---|---|---|---|---|
System | HA Software Upgrade | Tasks > System > HA Software Upgrade | HA Software Upgrade HA Software Upgrade Warning Message | N/A |
|
Backup/Restore Config | Tasks > System > Backup/Restore Config | No change | |||
Reboot SBC Edge | Tasks > System > Reboot SBC Edge | N/A | N/A |
| |
SBC Edge Factory Default - Factory Default | Tasks > System > SBC Edge Factory Default | No change | The Standby instance only supports the Factory Default option. | ||
Import Partial Configuration | Tasks > System > Import Partial Configuration | No change | |||
Import/Export Configuration Items | Import Local/Passthrough Auth Table | Tasks > Import/Export Configuration Items > Import Local/Passthrough Auth Table | No change | N/A |
|
Transformation Tables | Tasks > Import/Export Configuration Items > Transformation Tables | No change | N/A | ||
SIP Message Rule | Tasks > Import/Export Configuration Items > SIP Message Rule | No change | N/A | ||
SBC Easy Setup | Easy Configuration Wizard | Tasks > SBC Easy Setup | No change | N/A |
|
Media System Configuration | Tasks > SBC Easy Setup | No change | |||
Certificates | Tasks > SBC Easy Setup | No change | |||
IP/Protocols | Modify Ethernet IP Address | Tasks > IP/Protocols | No change | ||
BroadSoft Provisioning | Auto Configuration | Tasks > BroadSoft Provisioning | No change |
You can perform the tasks and subtasks on both the Active and the Standby instances unless otherwise specified.
Task | Subtask | WebUI Path | Active Instance | Standby Instance | WebUI Changes |
---|---|---|---|---|---|
Logs | Restart Report | Diagnostics > Logs | No change |
| |
Tools | Test a Call | Diagnostics > Tools | No change |
| |
Debug Call | Diagnostics > Tools | No change |
| ||
Query AD Cache | Diagnostics > Tools | No change |
| ||
Ping Destination | Diagnostics > Tools |
| |||
Traceroute to Destination | Diagnostics > Tools | No change |
| ||
ARP Cache | Diagnostics > Tools | No change |
| ||
High Availability | HA Status Details | Diagnostics High Availability > HA Status Details |
| ||
HA Tracking Table | Diagnostics High Availability > HA Tracking Table |
| |||
Teams Direct Routing | Connectivity Check | Diagnostics > Tools | No change |
| |
SBA Logs | Diagnostics > Tools | N/A | N/A |
| |
Ribbon Service Troubleshooting | Software Upgrade | Diagnostics > Ribbon Service Troubleshooting |
| ||
Packet Capture | Diagnostics > Ribbon Service Troubleshooting | No change | No change |
|
Task | Subtask | WebUI Path | Active Instance | Standby Instance | WebUI Changes |
---|---|---|---|---|---|
Overview | System Overview | System > Overview |
|
By default, you can only configure the settings of your SBC SWe Edge through the Active instance. The Standby instance is mainly in a view-only permissions mode unless otherwise specified.
Task | WebUI Path | Active Instance | Standby Instance | WebUI Changes |
---|---|---|---|---|
SBC Edge Real-Time Monitor | System > SBC Edge Real-Time Monitor | No change |
| |
Alarm View | System > Alarm View | No change |
|
- No labels