You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Current »

The 

Unable to show "metadata-from": No such page "_space_variables"
 device Overview page gives an overview of the selected
Unable to show "metadata-from": No such page "_space_variables"
 device.

Navigate to Devices > List and select the required 

Unable to show "metadata-from": No such page "_space_variables"
device.

Device Overview


The device overview page gives the following details:

  • Basic device details:
    • Model & Mode – The device model and mode.
    • MAC Address – MAC address of the 
      Unable to show "metadata-from": No such page "_space_variables"
      device.
    • Firmware version – Firmware version running on the device.
    • Active address – The active address of the device.
    • Description – Description if available.
    • Located in – The collection in which the device is located.
    • Connection State – Shows the state of the connection.
    • Up Since – The time at which the connection became active.
    • Policy Compliant – Specifies whether the device is policy compliant.
    • SIP Server Status – The SIP Server Status. Click the SIP Server Status to see more details about SIP Server Status.

      SIP Server Status

    • LAN/WAN – Shows the LAN/WAN status. Click LAN/WAN to see more details about the LAN/WAN Status.

      LAN/WAN Status

      Note

      The LAN/WAN Status is only available on 

      Unable to show "metadata-from": No such page "_space_variables"
       SBC models running 
      Unable to show "metadata-from": No such page "_space_variables"
       VOS versions 16.1.0 or higher.

    • T1 – Shows the T1 status. Click T1 to see more details about the T1 status.

      T1 Status

      Note

      The T1 Status is only available on 

      Unable to show "metadata-from": No such page "_space_variables"
       4800 models running 
      Unable to show "metadata-from": No such page "_space_variables"
       VOS versions 16.1.0 or higher.

    • Average MOS – Average MOS value during the last 15 minutes. 

    • Peak Calls – Peak calls value in the last 15 minutes. 

  • Advanced Features – Specifies whether SD-WAN is enabled. If it is not enabled, an option to enable it is available.

  • Configure SD-WAN – Allows you to configure the SD-WAN feature.
  • WAN Health – Provides details about WAN health status. 

  • WAN Traffic – Provides a graphical representation of WAN traffic.

  • WAN Traffic by Queue – Provides a graphical representation of WAN Traffic by Queue in the last 24 hours.

  • Total Peak Calls – Total number of peak calls every 15 minutes in the last 24 hours.

  • No labels