In this section:
This section provides instructions to perform the actions mentioned above on
Choose Devices > List.
The
Unable to show "metadata-from": No such page "_space_variables"devices list appears.Select the
Unable to show "metadata-from": No such page "_space_variables"device on which you want to perform the required action (see EdgeView Devices List image). The device Overview page appears.NoteIf a device generates an alarm, a warning icon appears corresponding to that device both in the Device List page and Device Details page.
Apply Collection Policy
Apply Collection Policy is active only when you make changes to the Policy of a Collection (to which the device belongs), or when you move the device to a Collection with a different policy.
Apply Collection Policy is not active for
Use Apply Collection Policy to push the new Policy changes to the device.
On the Device Overview page under the ACTIONS menu, select Apply Collection Policy.
You are prompted to confirm this action.
Select CONTINUE to apply to the new policy changes to the device (see Confirm the Action image).
Configure
Configure Device is not active for
To configure the selected device, perform the steps given below:
On the Device Overview page under the ACTIONS menu, select Configure Device.
The Configure Devices page appears.
Make the necessary configuration changes (see Configure Devices page image).
TipYou can also push a complete configuration from
Unable to show "metadata-from": No such page "_space_variables"15 or higher to anUnable to show "metadata-from": No such page "_space_variables". Select Click to select a file or drag it here to push new configurations to anUnable to show "metadata-from": No such page "_space_variables".TipRefer to Configuring Parameter Values for details with configuring parameter values.
- Schedule when to configure your device by selecting Perform Now or Perform Later. If you decide to perform the configuration later, enter the following details:
- Schedule Name – Enter a schedule name of your choice.
- Date and Time – Enter the date and time when the configuration is to be performed.
Time Zone – Choose whether time is to be calculated based on Local Time Zone or UTC.
Once you make necessary changes, select CONFIGURE 1 DEVICE (see Configure Devices page image). You are prompted to confirm configuration changes.
- Select CONFIGURE NOW to configure the selected device (see Confirm Configuration changes image).
If you scheduled this action to be performed at a later point in time, you can edit this action at any point before the scheduled time. To edit, go to Jobs > Scheduled Jobs and click the Edit icon corresponding to this action. For more details on scheduling and editing a job, refer to Scheduling Jobs in EdgeView.
Configure SD-WAN
Configure SD-WAN is not active for
To perform SD-WAN configuration, follow the steps given below:
On the Device Overview page under the ACTIONS menu, select Configure SD-WAN.
The Configure SD-WAN page appears.
Make the necessary configuration changes and then select CONFIGURE SD-WAN ON 1 DEVICE to save the changes (see Configure SD-WAN screen image).
TipFor more details on configuring SD-WAN, refer to Deploying SD-WAN on EdgeMarc Device.
Configure PoE
This action is available only for Power over Ethernet (PoE) devices.
To configure PoE, perform the steps given below:
On the Device Overview page under the ACTIONS menu, select Configure PoE.
The Configure PoE page appears.
Make the necessary configuration changes (see Configure PoE page image).
Refer to PoE Configuration Parameter Values to see in detail the PoE configuration parameter values.
Once you make the necessary changes, CONFIGURE POE (see Configure PoE page image). You are prompted to confirm PoE configuration changes.
- Select CONFIGURE NOW to configure PoE (see Confirm PoE Configuration image).
Open Device GUI
To open
On the Device Overview page under the ACTIONS menu, select Open Device GUI.
A new browser tab opens.
NoteUnable to show "metadata-from": No such page "_space_variables"does not support multiple concurrent sessions of Open Device GUI.
Upgrade
To perform the upgrade, follow the steps given below:
On the Device Overview page under the ACTIONS menu, select Upgrade Firmware.
The Upgrade Firmware page appears.
Under the Included Devices table, select the firmware version to which you want to upgrade the device (see Upgraded Firmware page image).
TipEnable the Send notification once Upgrade is completed check-box if you want to receive notifications.
- Schedule when to upgrade your firmware by selecting Perform Now or Perform Later. If you decide to perform the upgrade later, enter the following details:
- Schedule Name – Enter a schedule name of your choice.
- Date and Time – Enter the date and time when the upgrade is to be performed.
Time Zone – Choose whether time is to be calculated based on Local Time Zone or UTC.
Click UPGRADE 1 DEVICE (see Upgrade Firmware page image). You are prompted to confirm upgrade.
- Select UPGRADE NOW to upgrade the selected device (see Confirm Upgrade image).
If you scheduled this action to be performed at a later point in time, you can edit this action at any point before the scheduled time. To edit, go to Jobs > Scheduled Jobs and click the Edit icon corresponding to this action. For more details on scheduling and editing a job, refer to Scheduling Jobs in EdgeView.
Edit
To edit your device, perform the steps given below:
On the Device Overview page under the ACTIONS menu, select Edit Device.
The Edit Device dialog box appears.
- Edit the Name and Description and click SAVE (see Edit Device dialog box image).
Move
To move your device, perform the steps given below:
On the Device Overview page under the ACTIONS menu, select Move to Collection.
The Move to Collection page appears.
Choose the collection to which you want to move the selected device (see Move devices page image).
TipEnable the Send notification once Upgrade is completed check-box if you want to receive notifications.
- Select MOVE 1 DEVICE once you chose a collection (see Move devices page image).
Delete
To delete devices, perform the steps given below:
On the Device Overview page under the ACTIONS menu, select Delete Device.
The Delete Devices page appears.
Select DELETE 1 DEVICE to delete the device (see Delete Devices page image). You are prompted to confirm the deletion.
- Select DELETE NOW to delete the selected device (see Confirm Deletion image).
Run Health Report
Run Health Report is not active for
To Run Health Report, perform the steps given below:
On the Device Overview page under the ACTIONS menu, select Run Health Report.
The Run Health Report page appears.
Select RUN HEALTH REPORT FOR 1 DEVICE to run health reports (see Run Health Report page image). You are prompted to confirm the health report run.
Click RUN HEALTH REPORT NOW to run the health report (see Confirm Health Report Run image).
Backup
To back up the selected device, perform the following steps:
On the Device Overview page under the ACTIONS menu, select Backup Configuration.
The Backup Configuration page appears.
TipEnable the Send notification once Upgrade is completed check-box if you want to receive notifications.
Select BACKUP 1 DEVICE to backup your device (see Backup Devices page image). You are prompted to confirm backup.
- Select BACKUP NOW to backup the selected device (see Confirm Backup image).
You can edit this action at a later point in time. To edit, go to Jobs > Scheduled Jobs and click the Edit icon corresponding to this action. For more details on scheduling and editing a job, refer to Scheduling Jobs in EdgeView.
Restore
You can restore your device to a previous backup point using this action. In order to restore your device to a previous backup point, you must have your
You can only restore your
To restore the selected
On the Device Overview page under the ACTIONS menu, select Restore Configuration.
The Restore Configuration page appears.
In the Included Devices table, choose the backup point to which you want to restore the device (see Restore Devices page image).
TipEnable the Send notification once Upgrade is completed check-box if you want to receive notifications.
Select RESTORE 1 DEVICE to backup your device (see Restore Devices page image). You are prompted to confirm the restore operation.
- Select RESTORE NOW to restore the selected device (see Confirm Restore image).
Change Passwords
To change the password, perform the steps given below:
On the Device Overview page under the ACTIONS menu, select Change Passwords.
The Change Passwords page appears.
You can change one or all of the following fields (see Change Passwords page image):
- Root Password
- GUI User Root
- GUI User Rouser
Select Set all as and then Root Password, GUI User Root and/or GUI User Rouser.
NoteThe password must contain alphanumeric and special characters and should be 6 to 8 characters in length.
Once you make the necessary changes, click CHANGE PASSWORD FOR 1 DEVICE (see Change Passwords page image). You are prompted to confirm the password change.
- Select CHANGE PASSWORD NOW to change the password(s) of the selected device.
Reboot
To perform a reboot, follow the steps given below:
On the Device Overview page under the ACTIONS menu, select Reboot.
The Reboot Devices page appears.
TipEnable the Send notification once Upgrade is completed check-box if you want to receive notifications.
Click REBOOT 1 DEVICE (see Reboot Devices page image). You are prompted to confirm the reboot.
- Click REBOOT NOW to reboot the selected device (see Confirm Reboot image).
You can edit this action at a later point in time. To edit, go to Jobs > Scheduled Jobs and click the Edit icon corresponding to this action. For more details on scheduling and editing a job, refer to Scheduling Jobs in EdgeView.