You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
Version 1
Next »
This section describes
Unable to show "metadata-from": No such page "_space_variables"
virtual machine recommendations for SBC SWe Lite when running on Microsoft Azure.
Recommendations for
Unable to show "metadata-from": No such page "_space_variables"
running in Azure
The recommended hardware and software settings are intended to ensure optimum stability and performance. If the recommended settings are not used, the
Unable to show "metadata-from": No such page "_space_variables"
may not behave as expected. Ribbon does not provide support for SBC SWe Lite instances deployed in non-recommended Azure VMs.
- Plan enough resources (RAM, CPU, NIC ports, hard disk, etc.) for all virtual machines (VMs) to run in Azure.
Allocate each VM with only as much virtual hardware as that VM requires. Provisioning a VM with more resources than it requires can, in some cases, reduce the performance of that VM as well as other virtual machines sharing the same host.
The vNIC recommendation is from 2 vNIC to . See below for guidelines.
SWe Lite Instance - Recommended Azure VMs
Azure VM Instance | vCPU | Maximum number of vNICs | SBC SWe Lite Supported Session Density |
---|
B1ms | 1 | 2 | 10 sessions, with 10 transcode (711 SRTP ↔ 729 RTP, full in band service suite) |
F1s | 1 | 2 | 300 sessions, with 100 transcode (711 SRTP ↔ 729 RTP, full in band service suite) |
F2s | 2 | 2 | 1000 sessions, with 200 transcode (711 SRTP ↔ 729 RTP, full in band service suite) |
F4s | 4 | 4 | 1000 sessions, with 400 transcode (711 SRTP ↔ 729 RTP, full in band service suite) |
- Minimal networking configuration requires the Management Network Interface and at least one Media Interface to be assigned.
- Each SBC SWe Lite VM uses approximately 5 GiB of Virtual Hard Drive space. Drive size is predetermined by the imported image.