You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »

In this section:

Related articles:

Ribbon Communications is rebranding its software and customer documentation on a per-product release basis after the recent merger of Sonus Networks, Inc. and GENBAND (GB). Separate GB / Sonus branding could be present in the documents until the rebranding is completed.

 

 

The Embedded Management Application (EMA) is a web-based management system for 

Unable to show "metadata-from": No such page "_space_variables"
 Session Border Controllers (
Unable to show "metadata-from": No such page "_space_variables"
s). EMA offers efficient operation, administration, management and provisioning (OAMP) of 
Unable to show "metadata-from": No such page "_space_variables"
s through its browser-based user interface. EMA supports all operations that are available from the 
Unable to show "metadata-from": No such page "_space_variables"
 Command Line Interface (CLI) and, in addition, provides specialized functionality that facilitates common device management operations.

EMA provides the following types of functionality:

  • Fault management
  • Configuration management
  • Security management
  • Certificate management
  • Support to upgrade/downgrade software
  • Service provisioning workflows
  • Alarm monitoring

The Embedded Management Application (EMA) User Guide provides operational instructions covering all aspects of the EMA interface.

EMA User Guide Audience

This guide is intended for operators and system administrators responsible for provisioning, maintaining, and administering the

Unable to show "metadata-from": No such page "_space_variables"
. It is assumed that the end user of this document will have basic understanding and working knowledge of the following technical aspects:

  • VoIP
  • SIP protocol
  • H323 protocol
  • IP-to-IP networking
  • Linux operating system
  • Packet networking.

This guide also requires specific knowledge of the 

Unable to show "metadata-from": No such page "_space_variables"
and its configuration.

The GUI images included in this User Guide are intended as examples and do not always reflect the latest interface design. The images will be replaced gradually.

Supported Browsers and Client Computer Requirements

Note

If the web browser crashes, hangs or is manually closed while logged into the EMA GUI, the EMA session will still remain open. Manual intervention by the administrator is required to terminate the session from the EMA GUI. To terminate the hanging session, refer to Users and Application Management - User and Session Management page.

The minimum recommended requirements for each user's computer are outlined below. Configurations that do not meet these recommendations may experience excessively poor performance. Also note that slow network connections can also result in poor performance.

Client Computers

The minimum recommended memory/processor requirements of a client computer/workstation when accessing EMA is following:

  • 2.4 GHz with dual core processor
  • 2 GB RAM

Supported Browsers and Platforms

The platform/browser combinations supported are listed in the table below.

The minimum browser resolution that is supported is 1024 x 768 pixels.

Supported Platforms and Browsers

Browser

Version

Platform and OS

Internet Explorer

9, 10, and 11

  • Microsoft Windows (XP, Vista, 7)

Firefox

31 and later

  • Microsoft Windows (XP, Vista, 7)
  • Intel-based Mac (10.5 and later)
Chrome32 and later
  • Microsoft Windows (XP, Vista, 7)

EMA Cross-context Queries

The EMA provides the ability to view status and statistics across contexts. For example, it is possible to view trunk group status across all zones and address contexts.  For large configurations, however, performance may be impacted when viewing status and statistics across contexts. This is especially true for configurations with more than 20 zones.

To address this problem,

Unable to show "metadata-from": No such page "_space_variables"
 provides a script to disable cross-context queries. If you experience performance issues when viewing status and statistics, run this script to alleviate this issue.

Note

Running this script disables all cross-context functionality forcing you to specify the object context before viewing status, statistics or configuration information for an object.  For example, after running this script you will need to first select a specific address context and zone in order to view trunk group status or a list of trunk groups.

Disabling Cross-Context Queries

To disable cross-context queries, perform the following steps:

  1. Open the BMC for the SBC.
  2. In the BMC, select the Remote Control tab, then click the Console Redirection button.
  3. Launch the redirection console.
  4. In the redirection console, login using an Administrator username and password for the SBC.
  5. Enter the following command and press Enter:

    /opt/sonus/ema/updateCrossContextDisabledValue.sh true
  6. Log out of the redirection console and close it

  7. Log out of the BMC.

 

Note

If the

Unable to show "metadata-from": No such page "_space_variables"
is part of an HA pair, perform these steps on both the primary and secondary
Unable to show "metadata-from": No such page "_space_variables"
.

Re-enabling Cross-Context Queries

To re-enable cross context queries, follow the steps above substituting the following command with the one in step 5:

/opt/sonus/ema/updateCrossContextDisabledValue.sh false

  • No labels