You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »

The Signaling Packet Capture configuration is described in this section. The Signaling Packet Capture data is stored in a ".PKT" file under /var/log/sonus/evlog/evlog location.

Note

In the absence of any device or filter configuration, the Signaling Packet Capture feature only captures SIP/H.323 signaling for calls which are traced by Call Trace Filters.

 

On the SBC main screen, go to Troubleshooting > Troubleshooting Configuration > Call Trace > Signaling Packet Capture.To View and Edit Signaling Packet Capture

The Signaling Packet Capture window is displayed.

Troubleshooting - Call Trace - Signaling Packet Capture

 

The following fields are displayed:

Signaling Packet Capture Parameters

Parameter Description
Signaling Packet Capture TimerThe signaling packet capture timer, in minutes, for both call and error trace filters. The value ranges from 0 to 360 minutes, with a default value of 180.
State

Use this flag to enable/disable signaling packet captures by enabling/disabling the timer.

  • Disable (default)
  • Enable

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.

 

Additional topics:

  • No labels