You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

In this Section:

Related Articles:

 

Note

The contents of this page caters to SBC SWe Cloud only.

The SBC SWe Cloud supports the system object Cluster Admin > Cluster Comm to configure intra-cluster VNFC communication interfaces for use with the Load Balancing Service.

For more information on configuring the Load Balancing Service for intra-cluster VNFC communication, refer to Load Balancing Service - CLI.


On the SBC main screen, navigate to All > System > Cluster Admin > Cluster Comm.

Note

For a SBC SWe Cloud cluster registered with an operational Sonus EMS, you can access Cluster Comm through the web-based GUI called SBC Manager. For information on different EMS users and their SBC equivalents, refer to SBC Navigator.

 

The Cluster Comm window is displayed.

Cluster Comm window

 

The parameters displayed in the Edit Cluster Comm tool are described below:

Parameter Descriptions

ParameterDescription
Type

Interface type used by Load Balancing Service for intra-cluster VNFC communication.

  • Mgmt (default)
  • IP
Mgmt Interface Group

The management interface group for intra-cluster VNFC communication.

  • mgmtGroup (default)
Mgmt IP Var

The configuration meta variable (1-255 characters) that fetches the IP address of the management ports for intra-cluster VNFC communication.

Address Context

Address Context for intra-cluster VNFC communication, when packet interface is used.

Note: This parameter is displayed only when the Type parameter is set to IP.

IP Interface Group

The IP Interface Group for intra-cluster VNFC communication, when packet interface is used.

Note: This parameter is displayed only when the Type parameter is set to IP, and a valid Address Context is selected from the dropdown list.

Pkt IP Var

The configuration meta variable (1-255 characters) that retrieves the IP address of packet ports for intra-cluster VNFC communication.

Note: This parameter is displayed only when the Type parameter is set to IP.

 

To Configure the Interface Type as Mgmt

  1. By default, the Type parameter is set to Mgmt.

  2. Select the Mgmt Interface Group and the Mgmt IP Var from the respective adjacent dropdown list.

    Edit Cluster Comm - Type Mgmt

  3. Click Save to save the configuration, or Undo Edits to cancel all changes.

To Configure the Interface Type as IP

  1. Click the radio button corresponding to the value IP of the parameter Type. The parameters Address Context and Pkt IP Address are displayed.

    Edit Cluster Comm - Type IP

  2. Select the Address Context from the adjacent dropdown list. The parameter IP Interface Group is displayed.

    Edit Cluster Comm - Type IP - IP Interface Group

  3. Select the IP interface Group from the adjacent dropdown list.
  4. Enter the meta variable for the parameter Pkt IP Var.
  5. Click Save to save the changes, or Undo Edits to cancel all changes.

  • No labels