Test Call Number Profile - CLI

The

Unable to show "metadata-from": No such page "_space_variables"

uses the Test Call Number Profile to verify PSX test data access. The

Unable to show "metadata-from": No such page "_space_variables"

uses this profile to determine whether to send a PSX query to a test PSX or to the production PSX. When the

Unable to show "metadata-from": No such page "_space_variables"

receives a call from one of the configured numbers in the Test Call Number Profile, the

Unable to show "metadata-from": No such page "_space_variables"

sends the PSX query to the test PSX, if available.

When the

Unable to show "metadata-from": No such page "_space_variables"

receives a call from a number not included in the Test Call Number Profile, the

Unable to show "metadata-from": No such page "_space_variables"

sends the PSX query to the production PSX.

Command Syntax

The Test Call Number Profile CLI syntax is provided below.

% set profiles services testCallNumberProfile <name of profile> testCallNumber <test number>

Use the following CLI syntax to associated a testCallNumberProfile with a trunk group:

% set addressContext <addressContext name> zone <zone name> sipTrunkGroup <SIP TG name> services testCallNumberProfile <testCallNumberProfile name>

Parameter Length/Description Description

testCallNumberProfile

1-23 characters

<profile name> – The name of the Test Call Number Profile.

testCallNumber

1-24 digits

<digits> – The test call number to include in the Test Call Number Profile.

NOTE: The

Unable to show "metadata-from": No such page "_space_variables"

supports up to 16 test call numbers per Test Call Number Profile.