You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

 

The BMC web application allows provisioning of primary and secondary host management interfaces. When the host management interfaces are configured, a direct link from BMC is enabled to EMA for installing and upgrading the

Unable to show "metadata-from": No such page "_space_variables"
application.

Use the following procedure to configure the primary and secondary host management interfaces:

  1. Login to SBC BMC using the IP address configured in the previous section. At the prompt, enter:
    Username: root
    Password: superuser

    The SBC BMC main screen appears.

    BMC Main Screen



  2. Click Configuration tab. The Configuration screen displays.

    Configuration Screen

  3. From Options menu, click Platform Management Network. A warning message appears.

    Warning Message

  4. Click OK. The Platform Management Network Settings screen displays.

  5. Configure the following network settings for both the Management Interface 0 and 1.
    - IPv4 Address or/and IPv6 Address
    - Prefix
    - Default Gateway

  6. Click Save.

    Platform Management Network Settings

    When upgrading from an application software release prior to SBC 3.1.x, an IPv4-mapped IPv6 address is applied as an unusable placeholder in the IPv6 management address. This mapped address must be removed or set to a valid IPv6 address when updating the management addresses via BMC.
    If you update the Management IP address through BMC and click Save, you must reinstall the SBC application software. If you update the management IP using CLI, EMS or EMA, it is automatically updated in the BMC and re-installation is not required.

    Warning Message



  • No labels