You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Back to Table of Contents

Back to All

Back to All - Global

The SIPREC protocol defines the interaction between a Session Recording Client (SRC) and a Session Recording Server (SRS), and controls the recording of media transmitted in the context of a communications session (CS) between multiple user agents.

The 

Unable to show "metadata-from": No such page "_space_variables"
supports the following SIP recording (SIPREC) interfaces:

  • SIPREC SIP-based session recording
  • Call monitoring MCT
  • NICE session recording

A basic call, or communication session (CS), is established between SIP phone 1 and SIP phone 2 through the

Unable to show "metadata-from": No such page "_space_variables"
. The
Unable to show "metadata-from": No such page "_space_variables"
establishes a Recording session (RS) for the CS based on configuration towards SRS.

The SRC and SRS act as SIP User Agents (UAs) whereby the SRC provides additional information (called metadata) to the SRS recording session to describe the communication sessions, participants and media streams to facilitate archival and retrieval of the recorded information.

The 

Unable to show "metadata-from": No such page "_space_variables"
determines if a call is configured to be recorded, and if SIPREC is to be used.

The SIPREC feature is controlled by a system-wide SBC license (SBC-SIPREC). If the license is not available, any SIPREC recording returned by a PSX is ignored.

Note

Not applicable to the SBC Software Edition (SWe).

Note

NICE and Media Packet Capture cannot be used simultaneously because the Splitter resource can only be configured for one feature.

For more information on SIPREC functionality and feature interaction, refer to Session Recording Support.

SipRec Commands

This option provides start recording and stop recording using SIPREC protocol.

Siprec Commands

The following options are displayed:

SipRec Command Parameters


Parameter

Description

startRecord

Initiates the SIPREC SIP-based session recording.

stopRecord

Terminates the SIPREC SIP-based session recording.


Select the required command and click Select.

To start recording

Select the startRecord command and click Select.

A pop window appears:

Siprec - Start Recording

 The following fields are displayed.

Siprec - Start Recording Parameters

Parameter

Description

Gcid

Specifies the GCID of call to start recording.

Call Leg

Call leg associated with this recording session.

The options are:

  • egress
  • ingress (default)
Srs Ip AddressSpecifies the IP address of the Recording Server.
Srs PortSpecifies the UDP Port of the Recording Server.
Trunk GroupSpecifies the name of the SIPREC trunk group associated with this recording session.

Make the required changes and click startRecord to initiate the SIP-based session recording. Click the "Command Name" button to implement the option. The result of the action is displayed.

Global - Siprec - StartRecord - Result

 

To stop recording

Select the stopRecord command and click Select.

A pop window appears:

Global - Siprec - StopRecord

 The following fields are displayed.

Siprec - Start Recording Parameters

Parameter

Description

Gcid

Specifies the GCID of call to stop recording.

Make the required changes and click stopRecord to stop the SIP-based session recording. The result of the action is displayed.

 

  • No labels