You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Back to Table of Contents

Back to CLI Configure Mode

Back to Global - CLI

In this section:

Unable to render {include} The included page could not be found.

The global country object allows you to configure the information about specific countries in your network. The Country table is pre-populated with sample Country IDs and descriptions when you first install the database. You must add any missing country codes applicable to your network to ensure accurate call processing.

Command Syntax

% set global country <country code> listOfNumberOfDigitsToMatch 
   called <list of digit lengths in called #> 
   calling <list of digit lengths in calling0 #> 
   criteria <list of digit lengths in called # for pattern matching>
 
% set global country <countrycode> variableLengthDialPlan <disable | enable> 
 
% show global country <countrycode> 
% show global country listOfNumberOfDigitsToMatch
   called <called>
   calling <calling>
   criteria <criteria>
   displaylevel <displaylevel>
 
% delete global country <countrycode>

Command Parameters

Global Country Parameters

Parameter

Length/Range

Description

<countrycode>

0-15

Specifies a unique identifier for the country.

listOfNumberOfDigitsToMatch

N/A

Select any one of the matching pattern.

  • called – Comma-separated list of numbers, indicating the number of digits in the Called Number used for pattern matching.
  • calling – Comma-separated list of numbers, indicating the number of digits in the Calling Number used for pattern matching.
  • criteria – Applies when numbers are translated using the SBC tables.

variableLengthDialPlan

N/A

Specifies the variable length Dial Plan flag.

  • disabled (default) – not in use
  • enabled – turned on and active

displaylevel

1-64

To display different levels of output information in show commands.

Command Example

To display the current list of country codes:

% show global country  
   1 - A unique identifier for the Country Code.  
   20 - A unique identifier for the Country Code.  
   27 - A unique identifier for the Country Code.  
   30 - A unique identifier for the Country Code.  
   31 - A unique identifier for the Country Code.  
   32 - A unique identifier for the Country Code.  
   33 - A unique identifier for the Country Code.  
   34 - A unique identifier for the Country Code.  
   36 - A unique identifier for the Country Code.  
   39 - A unique identifier for the Country Code.
   ......................

To view the configuration details of a specific country code:

admin@Hackos% show global country 1
 listOfNumberOfDigitsToMatch {
 	called 10,6,3,0;
 	calling 10,6,3,0;
 	criteria "";
 }
 variableLengthDialPlan disable;
 [ok][2012-07-06 06:24:45] 
 [edit]
 admin@Hackos%

  

The show command displays first 100 entries from the country option. To view the country name that you have created, use wild card.
  • No labels