You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

Back to Table of Contents

Back to Configuration

Back to Configuration - Profile Management

Back to Profile Management - Signaling Profiles

Back to Signaling Profiles - Sip Cause Code Mapping

Additional section:

In this section:

This object contains information about each SIP-to-CPC Cause Mapping Profile on the node.

Unable to show "metadata-from": No such page "_space_variables"
 supports up to 64 SIP-to-CPC and 64 CPC-to-SIP cause code mapping profiles.

To View Cpc To Sip Cause Map Profile

On SBC main screen, go to Configuration > Profile Management > Category: Signaling Profiles > Sip Cause Code Mapping > Cpc To Sip Cause Map Profile.

The Cpc To Sip Cause Map Profile window is displayed.

Profile Management - Signaling Profiles - Cpc To Sip Cause Map Profile

 

 

To Edit Cpc To Sip Cause Map Profile

To edit any of the Cpc To Sip Cause Map Profile in the list, click the radio button next to the specific Cpc To Sip Cause Map Profile name.

Profile Management - Signaling Profiles - Cpc To Sip Cause Map ProfileProfile Management - Signaling Profiles - Cpc To Sip Cause Map Profile Highlighted

 

 

The Edit Selected Cpc To Sip Cause Map Profile window is displayed below.

Profile Management - Signaling Profiles - Cpc To Sip Cause Map Profile Edit Window

 

 

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.

To Create Cpc To Sip Cause Map Profile

To create a new Cpc To Sip Cause Map Profile, click New Cpc To Sip Cause Map Profile tab on the Cpc To Sip Cause Map Profile List panel.

Profile Management - Signaling Profiles - Cpc To Sip Cause Map Profile Fields

 

 

The Create New Cpc To Sip Cause Map Profile window is displayed.

Profile Management - Signaling Profiles - Cpc To Sip Cause Map Profile Create Window

 

 

The following fields are displayed:

CPC To SIP Cause Map Profile Parameters

 

Parameter

Description

Name

The name of a SIP_TO_CPC CAUSE MAP PROFILE. This name cannot start with the string "default".

Base Profile

The name of one of the three fixed, default CAUSEMAP PROFILEs that the new CAUSEMAP PROFILE that is being created will be based upon. These CPC-to-SIP base profiles are:

  • DefaultCpcSip—current Sonus Mappings.
  • DefaultQ1912CpcSip—based on Q1912.5.
  • DefaultRFC3398CpcSip—based on RFC3398.
  • DefaultTS29163CpcSip—based on 3GPP TS 29.163

The base profiles cannot be modified. The base profile that you designate will be copied to the profile that you create. Additions, modifications, and deletions may subsequently be applied to the new profile via the CONFIGURE command.

Cause Map

Specifies the SIP-to-CPC cause mapping values. Enter cause map value between 1-255 and specify the following reasons:

  • q850Reason – Q.850 reason for a given CPC cause value. Specifies the Reason Header Q.850 value to include in the SIP message (when the includeQ850Reason parameter is enabled). Also indicates the cause code value to include in MIME encapsulated ISUP, if the call uses SIP-I signaling. (range: 0- 127 / default = 0).

    A value of "0" indicates that the Reason Header Q.850 value should be equal to the predefined ISUP mapping associated with the cpcCause value. If no predefined ISUP mapping exists (as for internal cause codes 151-159), the ISDN mapping is used.

  • sipCause – SIP Cause value for a given CPC cause value. (range: 300-606).

This parameter applies to Cpc To Sip CauseMap Profile only.

Unrec Action

Specifies the SIP cause value to use when an unrecognized ISUP cause value is received (a value that is not present in the CPC_TO_SIP CAUSEPROFILE):

  • q1912Procedure—Use the default value of the ISUP class of the unrecognized cause code and map that value to the SIP cause value, the default in DefaultQ1912CpcSip.
  • rfc3398Procedure—Use SIP 500 message (SERVER INTERNAL ERROR), the default in DefaultRFC3398CpcSip.

Include Q850
Reason

Specifies whether SIP error messages associated with this profile will include a
Reason Header Q.850 value taken from the Q850REASON parameter.

  • enabled—SIP error messages associated with this profile will include a Reason. Header Q.850 value taken from the Q850REASON parameter.
  • disabled (default)—the SIP error messages will not include a Q850REASON value.

To Delete Cpc To Sip Cause Map Profile

To delete any of the created Cpc To Sip Cause Map Profile, click the radio button next to the specific Cpc To Sip Cause Map Profile which you want to delete.

Profile Management - Signaling Profiles - Cpc To Sip Cause Map Profile Highlighted

 

 

Click Delete at the end of the highlighted row. A delete confirmation message appears seeking your decision.

Profile Management - Signaling Profiles - Cpc To Sip Cause Map Profile Delete Confirmation

 

 

Click Yes to remove the specific Cpc To Sip Cause Map Profile from the list.

 

  • No labels